DX7s 7 Ch w/ AR8000 NO SX's MD2 by Spektrum (SPM7800
Key Features
20 Model Memory
Built-In Telemetry
128MB SD Card (included)
Extensive Airplane and Helicopter Programming
Throttle-Activated Timer Setting
AR8000 High Speed 8 Channel Receiver
LiPo Battery Compatibility
8 Wing Types
5 Tail Types
3-Position Flaps with Delay and Elevator Compensation
Dual Rates and Expo
Differential
5-Point Throttle, Pitch and Tail Curves
6 Swash Plate Types
6 Programmable Mixes
Control Position Warnings
Audio and Vibe Alarm Settings
Large 126 x 64 LCD Screen
Mode Selection (Modes 1, 2, 3, 4)
Language Select (English, Italian, French, Spanish or German)
4.8V 2000mAh NiMH Transmitter Battery
High-speed 11ms frame rate with 2048 resolution
IN STOCK $ 299.99
Airtronics 8CH 2.4GHz FHSS Receiver (RDS8000)
This receiver utilizes Airtronics FHSS 2.4GHz technology. This means that no crystal is necessary.
This receiver uses the standard Z connector.
This receiver can be used with Airtronics RDS8000 2.4GHz Transmitters.
Dimensions: 47 x 27.5 x 15.2 mm
INSTOCK $ 80.00
HS-55 The HS-55 set the standard for affordable performance, offering precision components that have been engineered to provide long lasting trouble free service! Featured in a hundred model aircraft reviews worldwide, the HS-55 is your best choice when it comes to controlling” smaller” electric’s and Park Flyers.
Size: 0.89" x 0.45" x 0.94" 22.80 x 11.60 x 24.00mm
Weight: 0.28oz 8.00g
HS-645MG
The powerful HS-645MG is one of Hitec’s most popular servos. It’s the perfect choice for those larger sport planes or monster trucks and buggies requiring a durable high torque servo. Featuring our unique M/P and metal gear train technology, the HS-645MG offers one of the strongest gear trains available in any servo.
Size: 1.59" x 0.77" x 1.48" 40.60 x 19.80 x 37.30mm
Weight: 1.94oz 55.20g
Airtronics MX-3 3ch 2.4 GHz FHSS Radio Transmitter & Receiver
The new MX-3 FHSS (Frequency Hopping) 2.4 GHz Spread Spectrum radio system is based on the revolutionary MX-3.
Now you can have crystal FREE, interference FREE performance in the comfortable MX-3 chassis.
The MX-3 FHSS has all the features of the MX-3, plus 18 Model Memory. You can save all of your models and setups in one transmitter and be on your way to the track.
Never worry about having the correct crystal, because you have crystal FREE interference FREE 2.4 GHz technology.
The MX-3 FHSS is available as a transmitter and receiver system that includes: 2.4 MHz Transmitter, Receiver and Dry Battery Holder. Additional 2.4 GHz 92324 3 channel receivers are available separately.
MX-3 3ch FM Comp w/1 94102Z - 75 MHz
Features
FM Transmitter and Reciever
Never Change Crystals Again!
3 Channel FM Computer System
Digital Dual Rate Steering Adjustment
Digital Throttle Trim
Digital Steering Trim
Auxillary Channel 3 Lever
Adjustable (70/30) Throttle Trigger
Soft Touch Programming Keys
Eronomic Comfor Handle
Charging Jack for Optional Transmitter NiCd Battery Pack
Wrist Strap Support
4 Cell Dry Battery Holder
Switch Harness
Large LCD Display on Transmitter
Black & Chrome Steering Wheel
18 Model Memory
Unique and Functional Pistol Grip Transmitter Design
Well balanced for precise control
Non-slip rubber steering wheel
Well placed digital trim levers
Optimum third channel switch location
Adjustable Throttle trigger
Low Battery warning
Sound Beep On/Off
Airtronics 3ch Super Micro N/B Receiver 75MHz Synthesized
This receiver does not require a crystal! Simply dial in any of the 30 channels available for 75MHz operation.
Dimensions: 1.66 x 1.06 x 0.63 inches
Weight: 18.5 grams
Airtronics 3ch Super Micro Receiver 27MHz FM Synthesized
This receiver does not require a crystal! Simply dial in any of the 6 channels available for 27MHz operation
Dimensions: 1.66 x 1.06 x 0.63 inches
Weight: 18.5 grams
Eclipse 7
Considered one of the best aircraft control systems in the market today, the Eclipse 7 is loaded with features, 7-channels, 7-model memory, shift changeability so you can use any brand of FM 72Mhz. receiver, optional 50-channel SPECTRA synthesizer module to select any channel to fly on, and specific programming for helicopters, gliders, and glow, gas or electric fixed wing aircrafts. The Eclipse 7 has the quality, value, and features that you have come to expect from Hitec. For R/C Pilots that demand an extra level of performance and reliability, Hitec has created a “super fast response” PCM technology called “Quick Pulse Code Modulation” in the Eclipse 7. The “Quick” PCM signal has an incredible 0.011 second response rate for the solid control feel you want for your heli or gas powered airplane.
FEATURES: Charges 4-8 cell NiCd or NiMH (4.8 - 9.6V) cells with a capacity
range of 750-7500mAh
NiCd and NiMH compatibility with custom peak detection
Pushbutton controls, audible tones and a custom LED with backlight
for easy setup and use
Selectable charge currents of 800mA, 1.5A, 3A and 5A
Automatic TRICKLE charge fills pack completely after peak charge for
optimum battery performance
Precise peak detection algorithm with automatic TRICKLE charge fills
packs completely for optimum voltage and run time
Built-in jack included for charging 4 or 5 cell NiCd or NiMH
receiver batteries for nitro models and even transmitter batteries
LCD shows battery voltage, charge current, time, capacity, battery
type and more
Small, lightweight switching AC power supply delivers up to 5 amps
of charge current
Solid state reverse polarity and current overload safety devices
FIVE YEAR warranty
Great Planes Electrifly Triton2 DC Computer Charger
FEATURES: Great for many applications including Airplane and Heli Batteries,
Tx and Rx batteries, Field Batteries and more
Handles 1-24 cell NiCd/MH (1.2 - 28V)
1-5 cell Li-Ion or LiPo (3.6 or 3.7V cells)
6, 12, 24V Pb cell (2V per cell)
Precision Zero DeltaV Peak Detection with adjustable sensitivity
for NiCd and NiMH batteries
"Constant Current / Constant Voltage" charge method for Pb and
Li-Ion/LiPo batteries
Fast Charge Thermal Cutoff (GPMM3151 Thermal Probe available
separately)
Top-Off Charge feature fully charges NiMHs without overheating
0-250mA adjustable TRICKLE Charge current (NiCd and NiMH only)
.1-3A Adjustable Discharge Current
Adjustable Discharge Cutoff Voltages for NiCd/MH, pre-set voltages
for Pb and LiPo/Ion
Perform 1 to 10 cycles (NiCd/MH only)
Recall data for 10 full cycles
Configure up to 10 batteries in memory for instant, easy recall and
charger setup
Displays Input and Output Volts, Peak Volts, Avg Dsch Volts, Chg and
Dsch Capacity, Currents and Time, Error Messages (No Battery
Connected, Open Circuit, and Reverse Polarity)
Audible sound cues aid in programming and notification of function
changes
Warning messages for Improper Input Voltage, Poor Connections,
Unsuitable Battery Condition, Reverse Polarity on output
Safety features include Cool-Off Time Delay, Maximum NiMH Charge
Input, Fast Charge Safety Timer, Current Overload and Reverse
Polarity Protection
Built-in cooling fan for better charge efficiency and extended
charger life
Small and lightweight, with a super-sturdy aluminum case for rugged
durability
Full 1 year warranty
$ 104.99 IN STOCK
Venom Pro Charger w/ Power Supply - US
If you have been searching for just one RC battery charger to handle all of your charging needs, look no further than the Venom Multi Function Pro Charger. This charger is available in both DC and AC/DC power configurations so there are no limitations. This machine can handle charging, discharging, balancing (LiPO/LiON/LiFE cells), cycling and more.
If you have multiple kinds of RC vehicles and other battery charging needs, the Pro Charger is able to service multiple types of batteries. Many RC enthusiasts have to use a special LiPO charger, a separate RC charger for each type of battery and manage all of the plugs and cords. The Venom Multi Function Pro Charger handles five different kinds of batteries in just one machine; NiCD, NiMH, LiPO, LiON/LiFE and Lead Acid batteries.
LiPO and LiON and LIFE batteries can have multiple cells depending on the size of the battery and need special handling to fully charge them. The Venom Pro Charger can handle 1 to 6 cell LiPO, LiON/LiFE at a time and a whopping one to fifteen cells for NiCD and NiMH batteries.
This system allows users to define charge rates from 0.1 amps to 5.0 amps depending on what they need. The Venom Multi Function Pro Charger also allows the user to create up to ten different charger profiles with a USB PC connection. If you use more than one RC car battery charger you can integrate all your power needs into one keeping track of each profile separately. To handle all the different kinds of vehicles there are six different power plugs; the new Traxxas® High Current Connector (TRX Plug)s, Tamiya, Alligator Clip, Futaba, Glow Igniter and JST plug.
The Chargers easy to use features include; Charging, Discharging, Cycling, Balancing (LiPO/LiION/LiFE cells), User definable charge rates from 0.1 amps to 5.0 amps, USB PC Linkability, Temperature Probe and 10 User-Defined Charger Profiles. Comes with six different charging plugs including the new Traxxas High Current Connector. Finally, an R/C battery charger that is as dedicated to performance as you are.
1. Apply to Ni-Cd, Ni-MH, Li-Ion, and Li-Poly batteries.
2.Special aluminum alloy anodic treatment outer case for good heat dissipation and great quality.
3.Use heat sink for the heat dissipation and extend the use life.
4. Automatic Ni-Cd/Ni-MH battery discharge/ charge cycle for battery activation.
5. Use RCE-6BA Li-Po Balancer to protect the batteries during charging, and extend the battery life, to improve the performance of battery and increase the power.
RCE-6BA Li-Po Balancer:
1.Separate balancing and charging ports eliminating charging amperage limit due to balancing wires’ gauge.
2.Dual mode balancer: Can be used as stand alone balancer, or concurrently with a separate charger.
3. Automatically balance 2~6 cells li-poly packs.
4.Balancing voltage resolution accurate to ±0.005V.
5.Individual cells’ balancing status displayed through LEDs.
6.Overcharging prevention circuitry with cutoff set at 4.26V/cell for additional safety, minimizing potential damages to the cells.
7.Low voltage cutoff set at 3.3V/cell to prevent over discharging of cells.
NOTE:
Do not leave the charger is operating unattended as it may cause a fire.
Transmitter (Tx) Battery Type: 4 AA Alkaline Batteries (included)
Experience Level: Beginner
INSTOCK $ 99.99
Flight Leader Aluminum Case - Large$59.99
Flight Leader Aluminum Tote Case High quality, super-strong aluminum tote box with heavy duty construction and large enough to carry one or two transmitters and all of your field equipment. Features:
Two tough hinges
Two lockable over-center catches
Handle and removable carrying strap
Factory-cut foam liner
Strong, ribbed aluminum contruction
Versatile internal dividers for separate storage compartments
Neat storage pockets in the lid for small tools
This is the VoltWatch2 on-board Receiver Battery Monitor for
4.8V and 6V NiCd and NiMH receiver packs.
This mounts on the outside of the airplane, so you can see at a glance
the status of the receiver battery mounted inside.
FEATURES: 7-LEDs provide instant, accurate battery voltage status of Low, Safe,
or Max. Only one LED glows at a time
Small switch to select 4.8V or 6V battery
Very lightweight, only .15oz (4.3g) unit can mount on the side
of the fuselage, or under the plane's canopy
Draws amazingly low current - from 4-34mA depending on the battery
voltage
Plugs into any open receiver channel using a Futaba J connector
DC Balancing Charger for Li-Po, Li-Fe, Ni-MH, Ni-Cd, and Lead-Acid Batteries
Balance Charges 1-6 cells
Cycles
Charges
Discharges
high performance, micro-processor controlled, fast charger/discharger has a built-in Lithium balancer. It's perfect for charging Li-Ion, Li-Po, Li-Fe, Ni-MH, Ni-Cd and Lead Acid batteries from a 10~18.0v DC power source. Maximum internal circuit power = 50W. Variable charge current = up to 5.0A. Charging and discharging cycles, 5 regime memories, a storage setting for Lithium packs and much more.
Airtronics MX-Sport 2.4G FHSS-2 Computer Radio (TX/RX)
Venom Pro Charger Plus w/Power Supply US $199.99
Venom’s new Multi Function Pro Charger Plus is available in an AC/DC power configuration to suit a variety of user needs. The Venom Pro Charger Plus will charge 1 to 8 cell LiPO and LiION/LiFE Battery Packs, as well as NiCD and NiMH battery packs with 1 to 27 cells and Lead Acid Batteries. The Venom Pro Charger Plus has many easy to use features which include; Charging, Discharging, Cycling, Balancing (LiPO/LiION/LiFE cells), User definable charge rates from 0.1 amps to 7.0 amps, USB PC Linkability, Temperature Probe and 10 User-Defined Charger Profiles. Comes with six different charging plugs including the Traxxas® High Current Connector (TRX Plug). The Venom Pro Charger Plus is a perfect compliment to Venom’s extensive line of batteries using the Traxxas® High Current Connector.
Specifications
AC/DC compatible with included AC power adapter
Input: 12V DC
Length: 164mm
Width: 120mm
Height: 45mm
Weight: 21.1oz/598g
Charging Capabilities
LiPO/LiION/LiFE: 1-8 cells
NiMH/NiCD: 1-27 cells
Lead Acid (Pb): 2V-36V
Charge Rate: 0.1 – 7A
Discharge Rate: 0.1A – 5A
Charge / Discharge Cycles: 1 to 5 cycles
10 Profile memory
USB PC link
Hitec Aurora 9 2.4GHz Tx & Optima 7-Channel Rx
FEATURES: AFHSS (Adaptive Frequency Hopping Spread Spectrum) 2.4GHz/PPM/PCM
compatible
Ideal for airplanes, sailpanes and helis
Standard programming features include 9 Assignable Control Channels,
3 Model Types (ACRO/GLID/HELI) Programming, 30 Model Memories,
Servo Reverse Speed and Monitor, 8 Flight Conditions with 10
Characters and more
Advanced ACRO programming includes, 9 Wing Type (6 Main Wings, 3
Flying Wings), 5 Tail Type, Quick Model Options Select, 7 Point
Throttle Curve, 3X Gyro Sensitivity, Snap Roll and more
Advanced GLIDER programming includes Motor Control, Airbrake,
Lithium-Ion or Lithium Ferrite-Phosphate (A123) batteries
fully and safely
Pushbutton controls and audible tones for easy setup and control
Precise peak detection with automatic TRICKLE charge fills packs
completely for optimum voltage and run time, 3 - 20mV adjustable
peak detection helps to customize charger-to-battery performance
Built-in banana jacks allow connection with many common charge
adapters, an adapter with Kyosho type plug is included
Built-in fan for long lasting performance
Custom reversed LCD with backlight for easy viewing in any condition
shows input and output voltges, peak voltage, charge current,
charge capacity and time and more
Small lightweight switching AC power supply delivers up to 5 amps
of charge current
Solid state reverse polarity and current overload safety devices
FIVE YEAR warranty through Hobby Services beginning at date of
purchase
INCLUDES: DuraTrax Onyx 235 AC/DC Advanced Charger with Built-in Balancer and
output adapters for Deans Ultra Plug, Traxxas and standard
connectors, lithium balance adapters for ElectriFly and
FlightPower/Thunder Power
REQUIRES:
SPECS: AC Input: 110V AC 60Hz - 240V 50Hz, detachable cord, 50W
DC Input: 11-15V detachable cord with alligator clips
Battery Types: 1-10 NiCd or NiMH cells (1.2-12V)
1-4 cell LiPo, LiIon or LiFe (3.7-14.8V)
Fast Charge Current: 0.1 - 8.0A linear (4C limit for Lithiums, 5A
limit with AC input
Fast Charge Termination: Peak detection for NiCd/MH, CC/CV for
Lithium
Fast Charge Safety Timer: OFF-300 minutes
NiCd/NiMH Peak Sensitivity: 3 - 20mV adjustable
NiCd/NiMH Auto Trickle Current: Auto (1/20 fast charge settings) or
manual(0 - 250mA)
Battery Memories: 10
Protective Devices: Solid-state reverse polarity and current overload
Case size: 6.3 x 5.3 x 1.7" (160 x 134 x 43mm)
Weight: 19.7oz (559g) with DC cord attached
IN STOCK PRICE 89.99
Hitec Full Telemetry Pack 2.4GHzIN TOCK 224.99 FEATURES: Compatible with Optima 7 and 9 receivers, Spectra 2.4 module and
Aurora 9 transmitter
Full telemetry system can transmit information to the Spectra module
for display on LCD of the Aurora 9 and/or computer monitor
(HPP-22 software is requ
STD DIGITAL SERVO .19/145
Key Features
Basic 5-channel 2.4GHz DSMX radio and receiver
Easy-to-use control for basic models
Includes AR600 6-channel full range sport receiver
Delta wing mixing
HI/LO rates
Servo reversing
JR and Spektrum compatible trainer system
Hitec HFP-25 Digital Servo Field Programmer & Tester
LiPo, LiFe, NiCd and NiMH – the Onyx 245 charges them all and has built-in balancing for lithium packs that maximizes their safety, longevity and performance. Plus it’s two chargers in one! Identical twin outputs make the Onyx 245 an excellent choice for models that use two battery packs, and for modelers who rotate through multiple batteries at home or at the track.
AC/DC flexibility, simple menus and controls, advanced LCDs with backlight, and compact size make it easy for anyone to use anytime, anywhere. With its power and versatility, the Onyx 245 gives racers yet another advantage on race day!
Features:
Two independent outputs – each with built-in balancing for up to 3S lithium batteries
Both outputs are compatible with LiPo, LiFe, NiMH and NiCd batteries, and the Onyx 245 can charge two batteries of different chemistries simultaneously
Each output includes a built-in jack for charging 4-5 cell receiver packs and even transmitter packs
Includes Deans® Ultra Plug®, Traxxas®, and standard connector adapters for each output
Includes ElectriFly® and FlightPower®/Thunder Power™ 6S balance boards
General Specifications:
AC Input: 110V AC 60Hz switching supply with U.S. plug
DC Input:Â 11-15V DC, built-in lead with alligator clips
Protective Devices:Â Solid-state reverse polarity and current overload
Dimensions:Â 7.95 x 6.1 x 1.77 in (202 x 156 x 45 mm)
Weight:Â 28.2 oz (801 g)
Specifications for each output:
Battery Types:Â 4-8 NiCd or NiMH (4.8-9.6V); 1-3 LiPo or LiFe (3.7-11.1V)
Battery Capacity: 100-7500mAh
Fast Charge Current:Â 0.8A, 1.5A, 3A, 5A linear (80W total, 40W each output)
Fast Charge Termination:Â Peak detection for NiCd and NiMH; cc/cv for lithiums
Fast Charge Safety Timer:Â 90 minutes
NiCd/NiMH Peak Sensitivity:Â 8mV for NiCd; 5mV for NiMH
NiCd/NiMH Auto-Trickle Current: Auto (50, 100, 150, 250mA)
Onyx 245 AC/DC Dual Charger with Balancing $119.99
AR8000 8-Channel DSMX Receiver by Spektrum (SPMAR8000) $129.99
11 Millisecond Frame Rate provides superior speed from stick input to servo output
2048 resolution provides smooth transition from stick input to servo movement
Flight log and telemetry compatible
Overview
Spektrum is committed to offering receivers to modelers in all categories within the hobby, and the AR8000 is no exception to that commitment. The AR8000 is packed with industry-leading features including an incredibly fast input-to-output response with an 11-millisecond frame rate when used with capable transmitters, 2048 resolution for ultra-smooth servo travel, and a compact footprint making it ideal for any application from extreme 3D to competition helicopter performance.
Always purchase products from a Horizon Hobby, Inc. authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, Inc. disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM2, DSMX or Spektrum.
Attention: Horizon Hobby has confirmed that all Spektrum Products being sold by KoKo Technology are counterfeit. We consider it a danger to use these products, waive all liability and will not support any warranty or service in regards to them.
FEATURES: Selectable S-FHSS and FHSS modes, the included R2006GS receiver
automatically adapts to the selected mode
Fail safe on all channels in S-FHSS mode only (throttle channel only
when FHSS mode is selected)
S-FHSS offers high speed 6.8ms frame rate
15 model memory with 4 character model naming
40x40 127 segment LCD display
Mode 1-4 selectable
R2006GS high-voltage (4.8 - 7.4V) 6-channel receiver with Easy-Link
circuitry, frequency hopping, spread spectrum design and Dual
Antenna Diversity
Endpoint adjustment (EPA), sub trims, servo reversing & throttle cut
Throttle position, mix and low battery warnings
Trainer system (trainer cord not included)
One year limited warranty through Hobby Services beginning at date of
purchase
Airplane Features;
Two programmable mixes and two 5-point throttle curves
Two 5-point pitch curves
Flaperon with differential rate
Flap trim (2 rates)
V-tail mixing
Elevon mixing
Helicopter Features;
Two 5-point throttle curves
Three 5-point pitch curves
Throttle hold
Hover pitch
Gyro and revo mixing
Four swash plate types (H1, H3, HR3 & H3 w/AFR)
Swash AFR (ail/ele/pitch)
Throttle mix
Electronic swash ring
Throttle and pitch delay
INCLUDES: Futaba 6J 6-Channel Transmitter, R2006GS Receiver and Instruction
Manual, Neckstrap, Servo Tray and Mounting Hardware, On/Off Switch
and ratchet spring
Four S3004 Standard Ball Bearing Servos, FUTM0004
Hitec Optima 6 Lite 6-Channel 2.4GHz Receiver
FEATURES: Dual LED status indicator with low battery warning
SPC (Supplemental Power Connection)
Fail safe and hold mode
Compatible with transmitters using Hitec AFHSS 2.4 system
Single BODA (Boosted Omni-Directional Antenna)
Smart scan mode selectable
Two year limited warranty through manufacturer beginning at date of
purchase
Hitec Optima 6 6-Channel 2.4GHz Receiver
FEATURES: Dual LED status indicator with low battery warning
SPC (Supplemental Power Connection)
Fail safe and hold mode
Compatible with transmitters using Hitec AFHSS 2.4 system
Single BODA (Boosted Omni-Directional Antenna)
Smart scan mode selectable
Two year limited warranty through manufacturer beginning at date of
purchase
Hitec Optima 7 7-Channel 2.4GHz Receiver
This is the Optima 7 7ch 2.4GhZ Receiver from Hitec.
FEATURES: Dual LED status indicator with low battery warning
SPC (Supplemental Power Connection)
Telemetry sensor and system port
Fail safe and hold mode
Compatible with Transmitters using Hitec AFHSS 2.4 system
Single BODA (Boosted Omni-Directional Antenna)
Scan mode selectable
Two year limited warranty beginning at date of purchase
Hitec Optima 9 9-Channel 2.4GHz Receiver
FEATURES: Dual LED status indicator with low battery warning
SPC (Supplemental Power Connection)
Telemetry functions (with Hitec Spectra 2.4 module) include
Temperature (4) RPM (2) Fuel Gauge, GPS (speed, altitude,
coordinates)
Fail safe and hold mode
Compatible with Transmitters using Hitec AFHSS (Adaptive Frequency
Hopping Spread Spectrum) 2.4 GHz system
Dual BODA (Boosted Omni-Directional Antenna)
Smart Scan mode selectable selects between normal and scan mode 2.4
signal types
Two year limited warranty through manufacturer beginning at date of
purchase
INCLUDES: One Optima 9 2.4GHZ receiver with two BODA antenna holders and
instruction sheet
REQUIRES: Hitec AFHSS 2.4GHz transmitter
SPECS: Dimensions: 1.89 x 1.12 x 0.44" (48 x 28.4 x 10.6mm)
Weight: 0.77oz (22g)
Operating Voltage: 4.8-7.4V from receiver battery power or ESC
4.8-35V using SPC function
Max Current Consumption: 190mA
Key Features
6-channel park flyer receiver
QuickConnect™
Red LED indicates number of holds
End-pin configuration
Overview
Spektrum’s 2.4GHz DSMX Technology gets even smaller with the AR6115e 6-channel DSMX Microlite Park Flyer Receiver with End Pins, which is ideal for small compact airframes. The AR6115e weighs less than 4.3 grams, making it a light 6-channel aircraft receiver option. Antenna locations give the AR6115e improved signal path diversity. The receiver also features a red LED that indicates the number of holds that have occurred since the receiver was last powered on. The AR6115e is compatible with all aircraft DSMX radios and module systems. It is designed for parkflyer use only.
** The AR6115e receiver is not compatible with the DX6 park flyer radio system
AR6115e 6-Channel DSMX Microlite Receiver: End Pin by Spektrum 49.99
AR6115 6-Channel DSMX Microlite Receiver by Spektrum 49.99
Key Features
6-channel park flyer receiver
QuickConnect™
Vertical Pin configuration
Red LED indicates number of holds
Overview
Spektrum’s 2.4GHz DSMX technology gets even smaller with the AR6115 6-channel DSMX Microlite Park Flyer Receiver. The AR6115 weighs less than 3.5 grams making it the lightest 6-channel conventional plug aircraft receiver on the market. Antenna locations give the AR6115 improved signal path diversity. The receiver also features a red LED (labeled with H) that indicates the number of holds that have occurred since the receiver was last powered on. The AR6115 is compatible with all aircraft DSMX radios and module systems. It is designed for park flyer use only.
TM1000 DSMX Full Range Aircraft Telemetry Module by Spektrum $ 56.99
Product Description
Key Features
Transmits vital model feedback to the transmitter
Full range performance
Telemetry compatible with any DSMX or DSM2 receiver, flight log data only available with data port compatible receivers
STi Telemetry Interface by Spektrum $99.99
Key Features
Real-Time Telemetry in the Palm of Your Hand
Compatible with iPhone, iPod touch and iPad
All your telemetry info in one display
Lets a buddy monitor telemetry while you fly
Alerts you when values exceed limits you define
Overview
STi (Spektrum Telemetry Interface) lets you transmit vital information from your model’s on-board Spektrum telemetry module to your iPhone, iPad or iTouch. It can also be programmed to alert you when any telemetry value you are monitoring exceeds limits you define. It’s a great way to let a flying buddy watch model functions for you so you can focus more on flying and less on your transmitter display.
The STi is compatible with all DSM2/DSMX Spektrum and JR transmitters as long as it's bound to a telemetry module
AR6210 6-Channel DSMX Receiver by Spektrum $82.99
Key Features
6 channels
Internal and remote receiver
Patented DuaLink technology
ModelMatch prevents flying a model using the wrong model memory (feature does not work with module systems)
ServoSync (feature does not work with module systems)
SmartSafe failsafe system
AR7010 7-Channel DSMX Receiver by Spektrum$89.99
Key Features
7 channels
Includes patented MultiLink redundant receiver technology
Utilizes patented DuaLink dual frequency diversity system
Internal and one remote receiver
Patent pending ModelMatch prevents flying a model using the wrong model memory (feature does not work with module systems)
ServoSync (feature does not work with module systems)
Flight Log Compatible
SmartSafe failsafe system
Overview
The AR7010 combines an internal and remote receiver, offering superior path diversity. The radio system simultaneously transmits on two frequencies, creating dual RF paths. This dual path redundancy, plus the fact each of the two receivers is located in a slightly different location, exposes each to a different RF environment and creates a bulletproof RF link in all conditions. The AR7010 is Flight Log compatible (SPM9540 sold separately
