Pictured to the left are the Lap Cat I (middle boat), Lap Cat II (far right) and 32" Racing Lapcat (far left).
Lap Cat 1 Tunnel Kit Specifications:
Length - 27 "
Beam - 12"
Tunnel Width - 6"
Engine 3.5cc Outboard
Outstanding speed with excellent turning ability. Stability in the wind and roung water give the Lap Cat I a real advantage in competition.
Lap Cat II Tunnel Kit Specifications:
Length - 32"
Beam - 12-1/2"
Tunnel Width - 7"
Engine - 7.5cc outboard
Speeds near 50 mph can be obtained using a stock K&B 7.5cc outboard engine. Incredible stability and outstanding turning ability.
32" Racing Tunnel Kit Specifications:
Length - 32"
Beam - 13-1/2"
Tunnel Width - 7"
Engine - 7.5cc Outboard
The 32" Racing Tunnel is Prather's most popular tunnel. It's speed and stability has made it a real winner. The enclosed cockpit and narrow front sponsons keep the 32" Racing Tunnel on the water even in windy and choppy conditions and allow it to hold position in the turns when crossing boat wakes.
Features of the Prather Tunnel
The Prather Tunnels have many features that set them apart from other boats. The two most obvious are the joined hull and epoxy glass construction.
We carry the complete line of Prather Boats.
FEATURES: Fiberglass construction makes the AirForce durable and lightweight, and resistant to fuel residue
The Deck and Hull are prejoined, reducing final assembly (RTR) to merely mounting the engine pod to the deck
with the provided screws
The ARR version requires a .40 or .46 size engine, and 2-channel radio
The factory installed rudder provides swift, precise turning control
An included display stand doubles as a carrying tote
All of the included hardware is made of stainless steel to resist corrosion
White Gelcoat finish
90 Day limited warranty
INCLUDES: One ARR Airforce Airboat, pre-joined deck and hull, spinner, display stand, instructions
REQUIRES: .40 to .46 glow airplane engine
2-channel radio with 2 servos
Glow starter
Engine Starter
Fuel
12 "AA" batteries for radio
SPECS: Overall Length: 36" (915mm)
Hull Length: 30.5" (775mm)
Beam: 13.5" (343mm)
Aquacraft Models AirForce Nitro Powered ARR Air Boat
DISCONTINUED AT THIS TIME ??????
SPECIFICATIONS:
Length: 30 in (770 mm)
Beam: 11.25 in (285 mm)
Height: 14 in (355 mm)
Weight: 6 lb 5 oz (2.86 kg)
Includes: SuperTigre G34 engine w/exhaust, Tactic™ 2-channel 27MHz radio
It looks and handles just like a full-size “Everglades” swamp boat, and is the only R/C model of its kind that’s ready to run! The Alligator Tours airboat easily power-slides across water, lily pads, marshes and wetlands, and it’s so easy to run and maintain, even a first-time boat modeler will be out skimming across the water with the Alligator Tours airboat practically right out of the box
Features large air rudders just like those found on full-size airboats.
Strakes on the bottom of the hull help keep you in control.
No need for high nitro-blend fuel or special glow plugs.
Detailed driver and passenger seats add a realistic touch; a stand is included for display, and doubles as a handy tote
$272.99
INSTOCK !!!!!
Formula 1/8 Hydro RTR by Pro Boat
INSTOCK $1099.99
Key Features
Fully licensed scale version of the 2006 High-points Champion Hydro
High-performance Zenoah® G26M gas engine and water-cooled tuned exhaust
Centrifugal clutch and water pump let the Formula idle safely without overheating
Stainless steel running hardware
Pre-balanced beryllium Pro Boat propeller
Realistic fiberglass composite hydro-hull design for scale appearance and superior high-speed handling
JR® XR3i 3-channel FM radio system installed
Built under license from Formula/Thunderbird Products
Overview
The Pro Boat Formula 1/8-Scale Gas Unlimited Hydroplane is nothing short of the ultimate big-scale, ready-to-run RC boating experience. It’s an authentic replica of the 2006 ABRA high-points champion hydro.
The sleek, fiberglass hull comes in just under 4 feet long and is completely assembled and factory-painted in authentic Formula Boats colors with everything installed. Its potent, water-cooled Zenoah® G26M marine engine is equipped with a high-performance tuned exhaust system that can have you screaming across the water at speeds in excess of 35 mph, while the unique water pump/clutch design allows the engine to stay cool, whether idling or at full throttle. JR’s XR3i programmable FM radio system is included for smooth, precise control.
Just add the batteries and gas (sold separately) and you’re ready to go. For big-time boating fun that’s a cinch to get into, nothing else comes close.
Specs
Length:45.25 in (1131.1mm)
Beam:23.75 in (593.8mm)
Engine Size:Zenoah G26M Marine Engine (installed)
Speed:35+ mph
Radio:JR XR3i FM 75MHz (installed)
Trim Scheme Colors:Modeled after the full-scale 2006 high-points champion
Hull Type:Hydroplane
Needed to Complete
12 AA batteries (8 for the transmitter & 4 for the receiver)
Zenoah 2-cycle Oil (ZEN20001)
Fuel Pump (HAN155) (be sure the pump you use is rated for gasoline)
Gasoline (+87 Octane), ethanol-free
Flex Shaft Lubrication (PRB0101) with Marine Grease Gun (PRB0100)
CA or epoxy glue (used to build included boat stand)
Especially develop for the Thunder TIger 3.5cc outboard marine engine. sophisticated design with optimized speed and handling results. State-of-the-art engineering that provide quick and easy assembly to access the radio comparment for installation and maintanance.
A bright white hull and superstructure makes it easy to decorate with the colorful decal sheet provided, no painting required. Available in two color schemes.
Features
Lite-Rigid full fiberglass hull with vinyl hull stand
Quick-remove upper deck for easy maintenance
Top performance tunnel hull designed for the Thunder Tiger 3.5cc outboard marine engine
White bright hull and super structure makes it easy to decorate with colorful decals
High Performance Tunnel Hull approved by Jorgen Anderson
Available in 3 version; Kit, w/Engine and Super Combo
INSTOCK 259.99 W/ RADIO & MOTOR RTR
Thunder Tiger Outlaw Jr Brushless 2.4GHz RTR Yellow instock 219.99
Features
· Powered by a high-performance, water-cooled OBL29/20-15M brushless motor and
BLC-40M ESC
· Thunder Tiger Cougar PS2 2.4GHz 2-channel radio with mini receiver
· ABS blow-molded deep vee hull that’s preassembled and pre-painted
· On-board gear is easily accessible under a quick-release hatch
· Wooden display stand
Specifications
Length: 29 in (740 mm) Height: 6.5 in (165 mm)
Beam: 8.3 in (210 mm) Weight: 2.3 lb (1050 g)
AquaCraft Vela ONE Meter Sailboat 2.4GHz instock 349.99
FEATURES: Hull: Fiberglass with preapplied graphics and deck detail, rigging
line fasteners snap into eylets in the deck for fast, easy sail
setup
Main Mast: Competition-grade carbon fiber mast
Mainsail and Jib Booms: Aluminum
Sails: Constructed of fiber reinforced thermal plastic polyester
(polyethelene terephthalate) wih extra reinforcement along the
edges for protection against wind gusts and during transport, sails
are printed on one side to help with orientation at a distance
Radio: Tactic TTX240 2.4GHz 2-channel dedicated sailboat radio with
TSX382 high-torque sail winch servo
Keel/Rudder: Strong rigid material
Stand: Wooden
Assembly Time: Ready to sail in approximately one hour
Warranty: AquaCraft warrants the Vela for 90 days after the purchase
from defects in materials or workmanship of original manufacture.
AquaCraft, at their option, will repair or replace at no charge,
the incorrectly made part. This warranty does not cover damage
caused by crash, abuse, misuse, alteration or accident.
INCLUDES: AquaCraft Vela ONE Meter Racing Sailboat, 2.4GHz Radio w/sail winch
