Back to the Top
OUT OF STOCK
FEATURES: Chassis: Narrow composite tub type, fits ROAR approved 2S LiPo packs
            in saddle, short, and square configurations
          Drive: Rear wheel
          Transmission: New design has ball bearings, stronger gears, VTS
            slipper clutch
          Differential: 14 carbide ball type with lightweight outdrives
          Body: B5 clear
          Shocks: Factory Team V2 12mm Big Bore hard anodized aluminum, 3mm
            shafts, and updated O-rings for improved smoothness
          Front Suspension: Heavy duty steering and caster blocks, with insert
            system for easy caster and trailing axle adjustments, adjustable
            mount angle kick-up options of 25° and 30°, heavy-duty lubricated
            ball cups, and optimized ball studs for maximum suspension travel
            without binding
          Steering: Full ball bearing with horizontal ball studs for finer
            Ackermann adjustments, Ackermann describes the effect of the inner
            front wheel turning faster that the outer front wheel during turns
          Wheels: Plastic white dish type front, 0.94" (24mm) wide, 2.4"
            (61mm) diameter, rear 1.5" (38mm) wide, 2.4" (61mm) diameter
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle


INCLUDES: Associated RC10 B5 Factory Team off-road buggy kit, body with wing
            decals, wheels, shock oil and instruction manual


REQUIRES: Radio: Two-channel with high-speed servo
          Radio Batteries: (8) AA size
          Tires: 1/10 scale buggy for 2.2" wheels
          Pinion Gear: 48P, number of teeth to be determined by motor
          Motor: 540 size for buggy applications
           The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
           affordable motor and ESC for this vehicle.
          Battery: 7.4V 2S LiPo, or 6.0V LiFe (saddle, shorty, or square)
          Battery Charger: To match selected battery
          Building and track equipment


SPECS:      Vehicle;
          Length: 15.1" (385mm)
          Wheelbase: 11 - 11.1" (279 - 281mm)
          Height:
Associated 1/10 RC10B5 Team Kit instock

NOTES FROM OUR TECH DEPARTMENT
         This is the 1/10 scale Electric Powered, Radio Controlled,
                    Team Associated RC10B5M Team Buggy Kit.
       Purposely designed to excel on high-grip and high-speed tracks.

   **Additional Technical Info Will Be Added When It Becomes Available.**


FEATURES: Chassis: Aluminum, fits ROAR approved 2S saddle and short packs
            using the included foam insert
          Drive: Rear wheel
          Transmission: New design has ball bearings, stronger gears, VTS
            slipper clutch
          Differential: 14 carbide ball type with lightweight outdrives
          Body: B5 clear
          Front Suspension: Gullwing type with heavy duty steering and caster
            blocks, and insert system allows easy caster and trailing axle
            adjustments
          Steering: Full ball bearing with horizontal ball studs for finer
            Ackermann adjustments, Ackermann describes the effect of the inner
            front wheel turning faster that the outer front wheel during turns
          Wheels: Plastic white dish type front, 0.94" (24mm) wide, 2.4"
            (61mm) diameter, rear 1.5" (38mm) wide, 2.4" (61mm) diameter
          Shocks: Factory Team V2 12mm Big Bore hard anodized aluminum
          Differentials: Ball type with lightweight outdrives
          Wheels: Plastic white dish type front, 0.94" (24mm) wide, 2.4"
            (61mm) diameter, rear 1.5" (38mm) wide, 2.4" (61mm) diameter
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle


INCLUDES: Associated RC10 B5M Factory Team off-road buggy kit, body with wing
            decals, wheels, shock oil and instruction manual


REQUIRES: Radio: Two-channel with high-speed servo
          Radio Batteries: (8) AA size
          Tires of racer's choice
          Pinion Gear: Number of teeth to be determined by motor
          Motor: 540 size for buggy applications
           The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
           affordable motor and ESC for this vehicle.
          Battery: 6-cell NiMH with standard connector OR 2S LiPo battery
          Battery Charger: To match selected battery
          Building and track equipment


SPECS:      Vehicle;
          Length: 15.1" (385mm)
          Wheelbase: 11 - 11.1" (279 - 281mm)
Associated 1/10 RC10B5M Team Kit in
 stock
B44.3 Factory Team Kit 
1:10 Scale 4WD Electric Off Road Competition Buggy Kit 

3-Time I.F.M.A.R. World Champion & 4-Time R.O.A.R. National Champion! 

The RC10B44 has created a winning legacy with three I.F.M.A.R. World Championships, four R.O.A.R. 
National titles, and countless regional wins to its credit! Since winning the 2013 I.F.M.A.R. World 
Championships, the designers behind the doors of Area 51 set out to further improve the B44 and take it to 
an even higher level of performance. 

Enter the RC10B44.3 Factory Team Kit, the latest evolution of 
Team Associated’s 1:10 4WD electric off road competition 
buggy. The most significant changes are found on the new 
hard-anodized aluminum chassis, which helps lower the center 
of gravity to improve handling and durability. The chassis has 
been designed to have symmetrical torsional flex to improve 
handling consistency — the new floating motor mount, floating 
servo mount, and chassis machining help to provide the 
desired flex symmetry. 

Power and traction have continued to improve, so the B44.3’s 
drivetrain has been built up and refined to keep up with the demand of 
today’s high-traction off-road tracks. A set of four precision CVA’s 
transfer the power from the gear differentials via ball bearings 
throughout the car. 


Associated RC10B44.3 Factory Team Kit ON ORDER