Helicopters

• Heavy duty collective pitch arm

• Enlarged engine starting shaft from 5mm to 6mm

• Aerodynamic canopy for faster flights

• Metal alloy spring steel clutch with larger diameter

• Elevator control arm enhanced to eliminate flex

• Extended fan shroud increases cooling effectiveness, and strengthens the forward sideframe

stiffness at the same time

• Main rotor blade spindle enlarged to 6mm provides solid hovering, responsive 3-D performance and

consistent blade tracking

• Main rotor blade radial and thrust bearings enlarged from 5mm to 6mm for more precise blade pitch

control

• Thicken the steel ball mounting area on the flybar paddle control arms by 0.5mm eliminates any

flexing under extreme 3-D flying

• Tail rotor grips are the same as the 60 providing more solid control, and larger tail rotor diameter

• Vertical tail fin lengthened by 10mm to protect tail rotor blades during rough landings, and re-

enforced with ribs

• Swashplate re-designed for longevity and minimal freeplay

• Fuel tank resigned for Raptor .30 v2 with 340cc capacity

• Tank reduces aircraft CG shift and carburetor sensitivity

• Rugged aluminum tail boom supports with plastic ends eliminate fatigue and cracking

• Larger volume 30-size muffler for increased power and low noise

• Re-designed and strengthened sideframes increase crash survivability, and reduce engine vibrations

Aerocopter RTF Heli Trainer breaks all the rules with in dual rotor design. More agile and quicker reflexes sets the Aerocopter apart from the crowd. New and improved rotor head weight design also adds increased hovering stability and flight tracking. Includes everything needed to fly in one box. Features a 2 cell peak charger with auto cut off sensing technology. The included 800 Mah Li-poly 7.4 volt battery provides up to 15 minute run times n one charge. F.M. 4 channel two stick radio has a 2500 foot range for outdoor flight. Comes with 2 extra sets of main blades and one hex tool for blade removal.

For indoor Use only.

Key Features

100% factory-assembled, test-flown and ready-to-fly right from the box

Includes everything needed to fly—there's nothing extra to buy

Ultra-micro size and weight perfect for indoor flying

Innovative airframe design and electronic components offer incredible durability and precise control for excellent manueverability

Coaxial, counter-rotating rotor head design for unsurpassed stability and ease of flight

4-channel transmitter equipped with Spektrum™ 2.4GHz DSM2™ technology, digital trims and dual rates

Factory-installed 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer, gyro and fully proportional servos

Key Features

Advanced 3-in-1 control unit including main motor ESCs, mixer and heading lock gyro

The heading lock gyro in the CX3 offers incredible hold and control to maximize your flight experience.

Interference free 5-channel E-flite transmitter with built-in Spektrum 2.4GHz DSM2 technology

Lightweight Spektrum AR6100e receiver with DSM2 technology

Two feather-light S60 Super Sub-Micro servos--just 6.0 grams each

DC Li-Po balancing charger and convenient AC adapter

2S 7.4V 800mAh Li-Po battery pack with charge protection circuitry

Co-axial, counter-rotating rotor blades that make hovering easy for first-time pilots

100% factory assembled and test flown--no assembly or difficult setup required

Compatible with most Blade CX2 option parts

Optional LED navigational light set sold separately (EFLH2009 or EFLH2009R

FEATURES: Agile forward and backward operation and very stable hovering

Blade Design: Counter rotating for easy, stable flights, blades

pivot at the grip for more forgiveness in the event of a crash

Drive Motors: Two

Radio: Heli-Max 2.4GHz 4-channel with two digital servos, gyro and

ESC combined in one unit, gyro controls tail rotor axis

Main Blades: Plastic

Canopy: Plastic with carbon fiber detail

Battery: 3.7V, 400mAh LiPo, very light and compact

Battery Charger: AC wall type

Warranty: Heli-Max guarantees this helicopter to be free from defects

in both material and workmanship at the date of purchase. This

warranty does not cover any component parts damaged by use or

modification.

FEATURES: Capable of a wide range of fully aerobatic maneuvers including

flying inverted

Rotor Head: Collective pitch type with Bell-Hiller mixing and eCCPM

control system for high performance usually found on much larger

helis

Tail Rotor: Bevel gear drive, supported with ball bearings

Radio: Heli-Max 2.4GHz 6-channel with three digital servos for high-

speed stability and precise centering, servos weigh only 3g each

Landing Gear: Music wire frame type

Canopy: Plastic with simulated carbon fiber detail

Battery: 3.7V, 400mAh LiPo, very light and compact

Battery Charger: AC wall type

Key Features

Perfect for anyone who has flown a Blade CX3 or mCX

100% factory-assembled, test-flown and ready-to-fly

Unique rotor head design provides nimble response plus positive stability

Includes 4-channel 2.4GHz DSM2 transmitter

Includes 4-Port charger that charges four batteries at once, plus AC adapter

Includes TWO flight batteries for more flying time

Factory-installed 5-in-1 control unit that combines DSM2 receiver, motor ESCs, mixer, gyro and servos

Incredibly durable and weighs less than one ounce

Full line of replacement and option parts available

Overview

Weighing in at under one ounce, the nimble Blade® mSR RTF takes ultra-micro helicopter performance to the next level. It comes from the factory completely assembled and flight tested with everything you need to get flying. At the heart of the Blade mSR’s design is a Bell-Hiller rotor head that provides the kind of speed and agility you would expect of a single-rotor heli but maintains a measure of positive stability similar to a co-axial heli. This blend of agility and stability makes it the ideal “next step” for someone moving up from a coaxial heli, such as the Blade CX3 or Blade mCX.

For single-rotor ultra-micro heli excitement you can fly almost anywhere, the Blade mSR simply can’t be beat.

FEATURES: Hovers, climbs, descends, turns and flies forward and reverse

Coaxial design produces smooth flight without spinning the fuselage

2.4GHz 4-channel transmitter with LCD display and built-in battery

charger

Heading hold gyro

High capacity 3.7V LiPo battery

Flies for 10-12 minutes on a single charge

INCLUDES: Revell Proto CX Micro Helicopter, 2.4GHz 4-ch Radio System, two

Motors, LiPo Battery, four AA Batteries, spare set of Rotor Blades

and Screwdriver

REQUIRES: Charging battery

SPECS: Rotor Diameter: 7.4" (188mm)

Overall Length: 8.4" (213mm)

Weight: 0.95oz (27g)

Key Features

Brushless main motor

A great 2nd heli for anyone who has flown a coaxial or single-rotor fixed-pitch heli

Softer control response around center for transitioning pilots

Includes 6-channel HP6DSM 2.4GHz DSM2™ transmitter

Includes DC Li-Po balancing charger with AC adapter

Includes 3S 11.1V 1000mAh Li-Po battery pack

Spektrum AR6100e Microlite Receiver, installed

E-flite G110 Heading Lock Gyro, installed

Direct drive tail motor

Sturdy, shock absorbent two-piece main frame

Full line of replacement and option parts available

100% factory-assembled, test-flown and ready-to-fly

Overview

If you’re ready to step up from a coaxial or single-rotor fixed-pitch heli, the Blade® SR is the absolute best way to make that transition a successful one.

It comes out of the box programmed to provide softer climb, pitch and roll response around the center of stick movement. This, combined with the tough, two-piece main frame and lower head speed, makes the Blade SR more forgiving and easier to master than most conventional CP helis. Plus, it’s big enough to fly outdoors even if there’s a little wind.

Needed to Complete

Nothing—everything is included to get flying right out of the box.

●Features

1.Simple and light weight design provides awesome flight performance.

2.+-13°collective pitch is possible for extreme 3D performance.

3.Heavy duty tail with thrust bearings.

4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.

5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.

6.Battery tray designed for easy and clean radio gear installation.

7.Fuel Tank Capacity 630cc.

8.Heavy duty tail with thrust bearings.

9.Torque Tube driven tail for incredible 90 sized performance.

10.Rigid frame design that can also handle hard crashes without damage.

11.Super engine cooling system very efficient airflow to provide unequaled cooling and horsepower.

12.New main gear with one-way bearing design for high torque.

13.Ready to fly weight (no fuel) is an incredible 4.2Kg.

●Length:1335mm

●Height:450mm

●Main Blade Length:690~710mm

●Main Rotor Diameter:1562~1602mm

●Tail Rotor Diameter:281mm

●Engine Pinion Gear:20T

●Autorotation Tail Drive Gear:150T

●Drive Gear Ratio:8.2:1:4.54(E:M:T)

●Fuel Tank Capacity:630cc.

●Weight(Without Power System):Approx. 3200g

●Color carton:84.7x24.4x12cm

●Outer carton:86x50x37.5cm ,6sets/ctn

Accessories:

●T-REX 700 Nitro CF Kits SetX1 set

●690D Carbon fiber bladesX1

●2 In 1 Voltage regulator comboX1 set

●DS610 Digital servoX3 set

●GP750 Head lock comboX1

●RCE-G600 GovernorX1

Radio transmitter and electronic equipment required for assembly:

●Transmitter(7-channel or more, helicopter system)

●Receiver(7-channel or more)

●Standard servoX1

●Engine starterX1

●Dial pitch gaugeX1

●Fuel pumpX1

●Engine fuelX1

●90 MufflerX1

●Align 91H Engine or 91HP EngineX1

Features

1.Bump resistance fiberglass painted canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal.

2.Simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight.

3.+-14° collective pitch is possible for extreme 3D performance.

4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.

5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.

6.Pitch and All servos moved forward for CG.

7.Battery tray designed for easy and clean radio gear installation.

8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying.

9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.

10.Heavy duty tail with thrust bearings.

11.95mm Tail Blades.

12.Highly efficient shaft driven tail design.

13.Rigid frame design that can also handle hard crashes without damage.

14.Carbon Fiber frames, fins and boom supports.

15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower.

16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.

17.Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs).

18.Fuel Tank designed so that no additional header tank is required.

19.New main gear with one-way bearing design for high torque.

20.New flybar paddles feature light weight and sports.

21.New flybar control set design.

22.New tail boom supports.

●Length:1160mm

●Height:410mm

●Main blade length:600mm

●Main rotor diameter:1350mm

●Tail rotor diameter:240mm

●Engine pinion gear:20T

●Autorotation tail drive gear:180T

●Drive gear ratio:8.5:1:4.5(E:M:T)

●Flying weight:Approx. 3200g

●Color carton:72x25.7x12.5cm

●Outer carton:74.5x52.5x39.5cm ,6sets/ctn

Accessories:

●T-REX 600 Nitro kits setX1 set

●600D Carbon fiber bladeX1

●DS610 Digital servoX1

●GP750 Head lock gyro comboX1

●2 In 1 voltage regulator comboX1

●RCE-G600 GovernorX1

Radio transmitter and electronic equipment required for assembly:

●Transmitter(7-channel or more, helicopter system)

●Receiver(7-channel or more)

●Standard servoX1

●Align 50 engineX1

●50 MufflerX1

●Pitch gaugeX1

●Super starterX1

●Engine fuelX1

●Fuel pumpX1

Key Features

100% factory assembled, test flown and ready to fly right from the box

Precision swashplate with user-selectable control settings

Factory installed 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer , gyro and fully-proportional servos

Sleek new body and flashing LED lights

Coaxial, counter-rotating rotor head design

120mAh 14C single-cell 3.7V lithium polymer battery pack

Powerful dual micro coreless motors

Full line of replacement parts available

MLP4DSM 4-channel transmitter equipped with Spektrum 2.4GHz DSM2 technology and digital trims

Overview

Like the original Blade mCX, the Blade mCX2 is easy enough for anyone to fly and small enough to fly just about anywhere. The mCX2 has the same coaxial, counter-rotating rotor head design as the current mCX, but it adds an extra shot of excitement with user-selectable swash sensitivity and flashing LED lights that are built right into the body. The pilot can change the control settings to enable this heli to perform at higher speeds than the beginner settings. This helicopter also boasts heading-lock like performance for maximum control. It also boasts more powerful motors and a higher capacity 120mAh battery pack. The mCX2 is the ultimate beginner friendly machine with unsurpassed stability, incredible control, and extreme durability

FEATURES: Rotor Head: Coaxial

Radio System: Heli-Max programmable 2.4GHz 4-channel computer radio

with digital servos, dual rates and backlit LCD

Gyro: Heading-hold

Body: Trimmed with United States Army color scheme, side doors open

for access to mechanicals, cockpit and rivet detail

Battery: Two 3.7V 600mAh LiPo

Battery Charger: AC wall type, 50/60Hz, 0.3A

Tail Drive: Motor driven

Warranty: Heli-Max guarantees this kit to be free from defects in

both material and workmanship at the date of purchase. This

warranty does not cover any component parts damaged by use or

modification.

INCLUDES: Novus UH-1D Sub Micro Helicopter, 2.4 Radio System, Battery,

Charger, Navigation Lights, Instruction Manual and extra set of

Blades

REQUIRES: AA Batteries: 8

LiPo safe charge bag

SPECS: Rotor Diameter: 7.68" (195mm)

Weight: 2.75oz (78g) with supplied flight battery

Height: 4.8" (122mm)

Length: 8.27" (210mm)

Width: 1.93" (49mm)

Key Features

Sub-Micro size

100% factory-assembled, test-flown and ready-to-fly right from the box

Unique rotor head designed specifically to provide stability of a coaxial helicopter and agile control of a single rotor helicopter

Factory installed 5-in-1 control unit with Spektrum 2.4GHz DSM2-compatible receiver, main motor ESCs, mixer , gyro and fully proportional servos

Overview

The Blade 120 SR is a fixed-pitch heli that will give you the confidence to master the basics of single-rotor flight. Its unique rotor head was specifically designed to provide the inherent stability of a co-axial helicopter, but provide the agile control of a single rotor helicopter. Modeled after the popular ultra micro-sized Blade mSR, the sub-micro-sized 120 SR is larger, faster, and more powerful -- which makes outdoor flight a reality.

It comes out of the box 100% factory built and equipped with a factory installed 5-in-1 control unit with Spektrum 2.4GHz DSM2-compatible receiver, main motor ESC's, mixer, gyro, and fully proportional servos. A ready-to-fly version with 2.4GHz DSM2™ transmitter and a Bind-N-Fly® version without transmitter, for those who already own a DSM2 aircraft transmitter, are available. Both include a 1S 500mAh Li-Po battery and a single-cell, variable rate Li-Po charger as well as an AC power supply.

Overview

The Force helicopter battling system is designed to give you an out of the box air-to-air battling experience. The Force MH-35 is an ultra-lightweight, battle-hardened heli perfect for out-maneuvering opponents in tight quarters. Its self-stabilizing characteristics and mil-spec gyro stabilization system keep you rock steady and in complete control, even if you’re a Force rookie. Using our built-in battle module to send and receive infra-red signals that are range adjustable, you get to shoot down your opponent in mid-flight.

Game play, using a newly designed 5 channel custom transmitter, will focus on the themes in either one v one, or team play mode, like dog fights, target practice, and heli v ground. While in battle, the helis will react to being shot by spinning in place, through a system called VDAS, and eventually being grounded by safely powering down.

Key Features

Integrated flybarless unit increases stability, control and power, providing the user the ultimate ultra-micro heli experience for indoor and outdoor use.

Capable of maneuvers such as inverted hover, loops, flips, rolls, funnels, and hurricanes.

Very low discloading results in high maneuverability and good collective response.

Lightest heli in its class.

Two sets of blades included, fast-flight and high-performance.

Robust, long-lasting dual-ball bearing supported linear cyclic servos.

Two high-performance flight batteries included.

Overview

This helicopter will give transitioning pilots a more agile and capable collective pitch heli that will give them the confidence to master indoor aerobatics without the hesitance which comes with a larger outdoor only platform. Not to mention the cost makes it much more economical when learning.

It comes out of the box 100% factory built and equipped with a factory-installed Flybarless 3-in-1 Control Unit with Spektrum 2.4GHz DSM2 receiver, ESCs, and gyros. A ready-to-fly version with 2.4GHz DSM2 transmitter and a Bind-N-Fly version without transmitter, for those who already own a DSM2 aircraft transmitter, are available. Both variations include two 1S 200mAh 25c batteries, single port charger with AC adapter and a 1s High Current Ultra-Micro Battery Adapter Lead.

Using an integrated Flybarless system, the heli to gets up in the air without a mechanical flybar. The benefits of this system provides reduced drag on the main rotor head which results in more power, longer flight times, and provides the pilot the best of both worlds between stability and agility.

The Bind-N-Fly mCP X comes assembled with everything you need to fly in the box except a transmitter. Just charge the battery and bind the helicopter to any DSM2 compatible aircraft transmitter, and you'll be flying in no time.

Trex 500E Superior Combo Features:

• Electric power system.

• Simple and light weight design provides awesome flight performance and extreme 3D capability.

• Rigid carbon fiber frame design.

• Beautiful factory painted fiberglass canopy.

• Rotor head/tail with thrust bearings.

• Direct-to-swash CCPM linkage.

• Center of gravity of Battery tray designed close to the rotor head.

• Tail rotor drive belt system.

• Fully driven tail auto rotation system.

• Tail servo boom

The Blade 450 3D RTF blasts ready-to-fly 3D heli performance to new levels of precision and power. It comes completely assembled and equipped for aggressive 3D aerobatics with the kind of pro-class electronics and mechanics you would expect to find in more expensive kits that take hours to build. It’s even been flight tested and had the rotors balanced at the factory so you don’t have to do any setup. Simply charge its 3S 2200mAh 30C Li-Po battery and fly.

The DS76-series servos are specially designed to deliver maximum power and precision for extreme 3D heli flight

The G210HL gyro uses the latest in MEMS technology to provide amazing holding power during the most aggressive 3D maneuvers

The robust 35A speed controller is engineered to efficiently channel the high current flow of most any high-C 3S Li-Po battery

The compact 4.0 gram AR6115E receiver provides the superior response of Spektrum DSM® control as well as the benefit of ServoSync which dramatically enhances the precision of any CCPM heli

The rotor head mechanics have been optimized to provide the most aggressive 3D control response possible

Type: Collective Pitch Electric 3D Heli

Main Rotor Diameter: 28.4 in (720mm)

Tail Rotor Diameter: 5.6 in (142mm)

Gross Weight: 26.9 oz (760g)

Length: 25.8 in (655mm)

Motor Size: 420H brushless outrunner, 3800Kv (installed)

Kit/ARF/RTF: RTF

Minimum Age Recommendation: 14 years

Experience Level: Advanced

Recommended Environment: Outdoor

Assembly Time: Less than 1 Hour

Is Assembly Required: No

Key Features

Now includes aluminum head/hub, over-current protection PTC resettable fuse devices, 3-in-1 control unit and Spektrum™ AR6100e receiver

Flight ready—no assembly required

Test flown at the factory to ensure proper setup out of the box

Interference-free, 5-channel E-flite® transmitter with built-in Spektrum™ 2.4GHz DSM® technology

Coaxial, counter-rotating rotor blades that make hovering easy

Two feather-light S60 Super Sub-Micro servos—just 6.0 grams each

2-cell 7.4V 800mAh Li-Po battery pack with Charge Protection Circuitry

2–3 cell DC Li-Po balancing charger and AC adapter

Most parts compatible with the Blade® CX

Overview

The Blade® CX2 takes the excitement and beginner-friendly flight stability of the original Blade CX and adds Spektrum™ 2.4GHz DSM® radio control that lets you fly anywhere, anytime without ever having to worry about interference. It’s the first ready-to-fly RC aircraft of any kind to come with this extraordinary technology built in. In addition, the 4-in-1 control unit has been updated with improved gyro and tail control that gives the Blade CX2 even better tail response while minimizing drift. Two feather-light S60 Super Sub-Micro servos provide powerful, precise cyclic control. Topping it all off is an aggressive new body design that looks fantastic in flight and is unlike anything else out there.

This is the SR UH-1 Huey Gunship RTF helicopter. The Huey was the first turbine powered helicopter to enter production for the US Military and is most famously know for it’s service in the Vietnam War. This scale licensed Huey body is based on that famous helicopter and combined with the SR flight characteristics, is a great combination of scale and performance for a Ready to Fly.

This SR Huey, based on the popular SR RTF helicopter, is a great helicopter for anyone who has flown a single-rotor fixed-pitch helicopter. It comes out of the box programmed to provide a softer climb, pitch and roll response around the center of stick movement. This, combined with the tough, two-piece main frame and lower head speed, makes the Blade SR more forgiving and easier to master than most conventional CP helis. Plus, it’s big enough to fly outdoors even if there’s a little wind.

Scale UH-1 Huey Gunship Helicopter body gives that scale look in an RTF platform.

Uses the proven Blade SR platform so that you have a known and reliable set up.

Complete with the 6-channel HP6DSM 2.4GHz transmitter.

Factory assembled and test flown allows for out of box flying experience.

Direct drive tail motor power system for improved power and response

You will need...

Nothing! Everything you need is included in the box

Blade Scout CX RTF 3-Ch Heli

Key Features

Engineered by experts in RC helicopter performance

Advanced 2.4GHz radio control lets multiple helis fly at the same time

Computerized Piezo gyro for superb directional control and stability

Proportional rotor head servo for smooth, precise control response

Replacement parts available to keep your Scout CX flying like new

Overview

The amazing Blade Scout CX may only weigh a little over half an ounce (17 grams) but it will have you flying circles around other helis like it. State-of-the-art 2.4GHz radio control with advanced Blade engineering and electronics make it all possible. And it’s so easy to fly, you’ll be able to do it even if you’ve never flown before.

Needed to Complete

Nothing! Everything you need to get in the air is included in the box, including four AA batteries for the transmitter.

FEATURES: CCPM: eCCPM Electronic Cyclic Collective

Main Frame: Carbon, slim profile design 1.2" (30mm) wide, spacious

three deck tray for electronic devices

Rotor Head: Underslung for ultimate 3D performance, with internal

flapping stiffness control system for fast and sharp cyclic and

collective response. Can be set up for any flying style from

aggressive to docile.

Main Blades: Carbon fiber

Tail Boom: Aluminum

Canopy: Preprinted fiberglass

Main Shaft: Hardened, 0.39" (10mm) diameter

Main Gear Design: Lightweight and vented

Feathering Shaft: Hardened 0.27" (7mm) diameter

Paddles: Lightweight, 1.06oz (20g) for high-performance 3D

Fin: Carbon

INCLUDES: Titan X50B 50 Class 3D Helicopter Kit with Fuel Tank, Header Tank

Main Blades, Foam Blade Holder, Decals and Instruction Manual

REQUIRES: Radio: At least 6-channel heli radio with 5 servos

Gyro: Heading hold

Receiver Battery: At least 1000mAh

Engine: .50 cu in heli type

Glow Fuel: Heli blend with 15-30% nitro content

Building and field equipment

SPECS: Fuselage Length: 47.24" (1200mm)

Fuselage Width 7.87" (200mm)

Height: 15.75" (400mm)

Main Rotor Diameter: 52.95" (1345mm)

Tail Rotor Diameter: 10.24" (260mm)

Gear Ratio: 8.5:1:4.56

Total Fuel Capacity: 16.2oz (480cc)

Fully Equipped Weight: 6.83lbs (3150g)

Key Features

Spektrum™ AR7200BX DSMX receiver with BeastX technology

Powerful E-flite® 440H 4200Kv brushless motor

E-flite 35A S-BEC ESC

325mm carbon fiber main blades

Hardened 80-degree dampers

Composite aluminum/fiber-reinforced swashplate

E-flite DS76 digital sub-micro cyclic servos

E-flite DS76T digital sub-micro tail servo

CNC-machined aluminum head block

Triple ball bearing supported, hardened steel main shaft

Belt-driven tail rotor

Weighted tail blade mounting hardware

Rigid, lightweight main frame

Aluminum tail boom

Tail rotor grips with thrust bearings

Includes a high-output E-flite 3S 11.1V 2200mAh 30C Li-Po battery

Includes 3-cell DC Li-Po balancing charger

Overview

The phenomenal Blade 450 X has been designed from the ground up to give experienced 3D pilots the most extreme performance available in a Bind-N-Fly 450-size platform. Central to its awesome performance is the Spektrum AR7200BX 7-channel DSMX® receiver with built-in BeastX™ flybarless technology – the most advanced flybarless technology available for high-performance 3D helicopters. This, along with features like its high-output brushless power system, hardened dampers and carbon fiber main blades, allow the Blade 450 X to achieve a level of 3D performance that practically defies physics.

Needed to Complete

A 6+ channel DSM2- or DSMX-compatible transmitter with helicopter programmi

mSR X RTF

Key Features

AS3X™ Digital Flybarless System

High-Precision, Long Throw Linear Cyclic Servos

Light Disc Loading and high-performance rotor blade design

Caged Tail Motor Mount

Coreless main and tail motors

Carbon Fiber Tail Boom

MLP4DSM 2.4GHz DSM2 4-Channel Transmitter with Batteries

E-flite® 1S 3.7V 150mAh 25C Li-Po Battery

1-Cell DC Li-Po Charger included

Overview

Blade raises the bar yet again with the mSR X; the world’s first fixed-pitch ultra micro heli with advanced AS3X™ flybarless stabilization. The core of AS3X technology is a sophisticated, 3-axis digital sensor that stabilizes the rotor head and functions as a heading hold gyro. This, along with its powerful motors and high-precision cyclic servos, gives the mSR X a sense of stability and responsiveness no other fixed-pitch heli its size can match.

Needed to Complete

Nothing! Everything you need to get in the air is included in the box!

Product Description

Key Features

AS3X 3-axis stabilization system

4-in-1 DSM2™ receiver/ESCs/mixer/AS3X sensor unit

Durable, lightweight airframe

Potent 8.5mm brushed motors with protective drive gear guards

Can be flown in “X” or “+” configurations

Sleek, low-profile body with sharp mQX graphics

Includes E-flite® 1S 3.7V 500mAh Li-Po battery

Includes E-flite® Celectra™ 1-cell DC variable rate Li-Po charger

Needed To Complete

A 4+ channel DSM2 or DSMX transmitter