This is the 2.4GHz Radio Controlled, Gasoline Powered,
Ready to Run HPI Savage XL Octane Monster Truck.
**Additional Technical Info Will Be Added When It Becomes Available.**
FEATURES: Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.12"
(3mm) thick, extra strength composite roll cage
Drive: Full time four wheel shaft driven
Engine: GT15C 15cc gasoline with dual stage air filter and pull
starter
Exhaust: Tuned pipe
Radio: 2.4GHz
Transmission: Savage XL 3-speed with slipper clutch, metal gears and
adjustable shift point
Differentials: Sealed all metal
Clutch: Metal four shoe Quadra, heavy duty clutch bell
Fuel Tank: 10.1oz (300cc)
Suspension:
Shocks: Two stage oil-filled Big Bore
Shock Towers: --" (--mm) thick
Body: Painted and trimmed with Savage XL Octane graphics
Brake: Triple disc system, machined brake hubs
Bumpers: Front and rear
Spur Gear: Machined steel --tooth
Steering: Heavy duty cam type servo saver system
Wheels: Chrome plated 2.2" (56mm) wide with 17mm aluminum hex
hubs, 3.4" (87mm) diameter
Tires: All terrain
Ball Bearings: Full set included
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty Period: Two year limited, valid only in the US, Canada and
South America
INCLUDES: HPI Savage XL Octane Monster Truck with Gasoline Engine, 2.4GHz
Radio, painted & trimmed Body, Tuned Pipe, Instruction Manual
REQUIRES:
SPECS: Vehicle;
Length: 23.8" (580mm)
Width: 17.5" (445mm)
Wheelbase: 15.7" (400mm)
Height: 10.6" (270mm)
Weight: 15.6lbs (7076g)
Body;
Length:
Width:
Height:
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
Ready to Run HPI Savage XL Octane Monster Truck. DISC
12601 Savage XL K5.9 Nitro RTR
TECH NOTES
This is the 2.4GHz radio controlled, glow powered, ready-to-run
HPI Savage XL K5.9 Monster Truck.
**The difference between this version and the #104246
**is that this version includes a glow starter w/battery,**
**fuel bottle, 6-cell stick pack with charger, and six AA batteries,**
**but does not offer a choice of body colors.**
FEATURES: Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.12"
(3mm) thick
Drive: Four wheel shaft driven
Engine: HPI Nitro Star K5.9 .36 cu in (5.9cc), ABC cylinder and
piston construction, three needle composite bodied slide valve
carburetor with 9.5mm inlet, dual stage air filter, starts with
included HPI Roto Start 2 shaft drive electric starter, one-piece
engine mount and 0.12" (3mm) mounting plate
Exhaust: Polished aluminum two-chamber tuned pipe and polished
aluminum manifold
Radio: HPI TF-20E 2.4GHz with steering and throttle trim and reverse
and dual rate adjustment, transmitter does not have charge jack
Throttle servo: SF-10 Servo 4.5kg-cm 6.0V (HPIM2784)
Steering servo: SF-50 Metal Gear Servo (HPIM2777)
Wheels: Chrome plated 2.2" (56mm) wide with 17mm aluminum hex
hubs, 3.4" (87mm) diameter
Tires: HPI Terra Pin with spike pattern for grass and loose dirt
and center chevron pattern for directional stability, 7" (178mm)
diameter, 3.35" (85mm) wide
Shocks: Four Big Bore Savage Shocks
Fuel Tank: 5.4oz (160cc), flip top cap
Clutch: Three shoe aluminum
Clutch Bell: Heavy duty steel construction, vented 16 tooth
Body: Painted and trimmed 0.60" (1.5mm) thick polycarbonate GT
Gigante monster truck
Suspension: Double wishbone with lightweight suspension arms
Battery: 7.2V stick pack with standard connector for Roto Start
Battery Charger: Wall type charger
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Brake: Machined steel hub and dual red fiberglass brake discs
Transmission: Three-speed with metal gears and adjustable shift
point
Differentials: Alloy cases with with machined steel rings and pinion
bevel gears with new larger machined steel diff outdrives and axles
Slipper Clutch: Heavy duty dual slipper plates and shock absorbing
rubber pad
Spur Gear: Machined steel 52 tooth
Ball Bearings: Full set, rubber sealed
Steering: Bell crank with cam-type servo saver steering arms
Warranty Period: Two year limited, valid only in the US, Canada and
South America
INCLUDES: HPI Savage XL K5.9 Monster Truck with HPI Nitro Star K5.9 engine,
Roto Start electric starter, glow plug, air filter, 2.4GHz radio,
standard throttle servo, high-torque steering servo, hump receiver
pack, 6-cell stick pack, wall charger, painted and trimmed body,
glow starter with battery, 6 AA batteries, instruction manual
REQUIRES: Fuel: Car blend with 20% nitro content
Track equipment
SPECS: Vehicle-
Length: 23.8" (580mm)
Width: 17.5" (445mm)
Height: 10.6" (270mm)
Wheelbase: 15.74" (400mm) wheels on-center front-to-rear
Suspension Travel: 6" (152mm)
Body-
Length: 20.7" (527mm)
Width: 7.7" (196mm) at rear wheels, widest point
Width: 7.1" (180mm) ahead of fr wheels, narrowest point
Height: 5.3" (136mm)
Thickness: 0.60" (15.2mm)
106173 1/12 Wheely King 4x4 2.4GHz RTR
.FEATURES: Chassis: TVP (Twin Vertical Plate) plastic tube frame design with
rear wheelie bar
Drive: Four wheel
Motor: 27 turn
Radio: HPI TF-11 2.4GHz pistol grip
Battery: 7.2V, 2000mAh NiMH 6-cell stick pack with standard connector
Battery Charger: 120V wall type, charges in six hours
Ball Bearings: Full set included
Shocks: Four plastic bodied
Transmission: Single speed
Suspension: Front and rear solid axles with pivot arms, 6" (152mm) of
suspension travel for all-terrain driving
Wheels: Chrome 2" (51mm) diameter, 2.2" (56mm) wide
Tires: 5.4" (137mm) diameter, 2.75" (70mm) wide Mud Thrasher
Body: Prepainted and trimmed with decals
Caster: Non-adjustable
Camber: Non-adjustable
Warranty: Two year limited
INCLUDES: HPI Wheely King Monster Truck with motor, painted body, 2.4GHz radio,
ESC, 27T motor, 90T spur gear, 21T pinion gear, 6-cell stick pack,
wall charger, instructions and AA batteries for transmitter
109083 RTR Savage X 4.6 Nitro, in stock 499.99
TECH NOTES
This is the glow powered, 2.4GHz radio controlled 1/8 scale, ready to run,
Savage X 4.6 Monster Truck from HPI.
FEATURES: Chassis: Rigid 6061 series aluminum TVP (Twin Vertical Plate)
Drive: Four wheel shaft drive with heavy duty dogbones
Engine: HPI F4.6 with slide valve carburetor, ABC ("A"luminum piston
with a "B"rass sleeve that is "C"hrome plated), 8-port liner,
7.5mm slide valve composite body carburetor and dual stage air
filter
Exhaust: Composite construction tuned pipe, black in color
Clutch: Three shoe, heavy duty
Electric Starter: 6V starter with starter shaft, 7.2V 2000mAh
battery pack and AC wall charger
Radio: 2.4GHz pistol grip with failsafe and waterproof servos
Transmitter is TF-40 3-Channel 2.4GHz FHSS (HPIL5381)
Receiver is RF-40 3-Channel 2.4GHz
Differentials: Planetary gear with aluminum alloy cases
Shocks: Four Big Bore, oil filled nylon body
Transmission: Two speed with adjustable shift points
Brake: Dual heat resistant fiber discs
Body: Painted and trimmed GT-3
Bumpers: Composite construction
Wheels: Black chrome Warlock 2.2" (56mm) wide, 3.3" (83mm) diameter
with 17mm hex
Tires: 3.4" (85.5mm) wide, 6.2" (159mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bell crank
Throttle servo: SF-10W Servo (Waterproof/4.5kg-cm6.0V) (HPIM4105)
Steering servo: SF-20W Servo (Waterproof/6.6kg-cm6.0V) (HPIM4109)
Warranty: Two year limited through HPI beginning at date of purchase
valid only in USA, Canada and South America
INCLUDES: RTR Savage X 4.6 Monster Truck, .28 cu in (4.6cc) engine with
electric starter, NiMH starter battery, charger, glow starter, 8 AA
batteries, 4-way wrench, electric starter, fuel bottle, painted
body
aja Buggy RTR 2.114060 Q32 B.4GHz
t. This is the 2.4GHz Radio Controlled, Electric Powered, 1/32 scale,
RTR Baja Q32 Buggy from HPI.
FEATURES: Chassis: Composite nylon
Drive: 2WD direct drive
Motor: Brushed
Radio: TF-60 2.4GHz transmitter with built-in battery charger
"Real Steer" proportional steering for better control during wide
turns and sharp corners
Body: Lightweight polycarbonate, black in color
Battery: LiPo, charges through transmitter
Suspension: Front: independent, Rear: single spring
Wheels: Five spoke nylon, white in color
Tires: High traction, foam construction
INCLUDES: Baja Q32 Buggy with Motor, 2.4GHz Radio/Charger, Sticker Sheet,
eight Corner Markers, Body, Folding Cardboard Jump Ramp, Charging
Cable and Instructions
HPI115123
Baja 5R, 1970 Ford Mustang Boss Gas RTR, 23cc Engine
The Baja 5R On-Road takes the HPI Baja concept to all-new places: to the streets! With a lowered suspension designed purely for on-road action, this is the perfect way to enjoy large-scale fun while burning up the pavement! The iconic 1970 Ford Boss Mustang is the perfect fit for the the rear-wheel drive Baja 5R, and the vintage 8-spoke wheels and Tarmac Buster tires! The suspension and drivetrain is based on the extremely tough Baja 5B, so you know the on-road version will be super-tough in any situation, plus it will be very easy to find spares and upgrades. The Fuelie 23cc engine will give the Baja 5R wheelspinning power and enough top speed to make your pulse race!
Features:
Engine: Fuelie 23CC 2-stroke gas engine with high flow muffler
Radio: 2.4GHz DSS with failsafe
Clutch: 8,000RPM performance clutch
Shocks: Externally adjustable
Fuel Tank: 23.7oz (700cc)
Receiver Battery: 6V 3000mAh with wall charger
Specifications:
Length: 34" (863mm)
Front Width: 18.1" (460mm)
Rear Width: 18.9" (480mm)
Height: 9" 9228mm)
Ride Height: 1.4" (35mm)
Weight: 21.3lbs (9.6kg)
HPI115484
Baja 5B Kraken, Sidewinder X5 Gas RTR, 1/5 Scale, 2WD, w/ 2.4GHz Radio System
Teaming up with Kraken RC, HPI is proud to offer the Baja 5B buggy with the Kraken Sidewinder X5 roll cage conversion right out of the box! This amazing kit makes it easy to get one of the most unique looks in large scale RC: the sand rail style begs you to take it for huge jumps off monster sand dunes! This is completely pre-built and ready to drive right out of the box just add fuel for 30-minute runtimes! It's also completely outfitted with the latest Super Heavy Duty option parts, including driveshafts, front hex hubs and one-piece rear hubs so you can thrash it around the dunes or track as long as you like.
Features:
Chassis: 0.16" (4mm) pressed aluminum channel monocoque design with modular polymer roll cage
Drive: Two wheel, steel dogbones with rubber boots, super heavy duty driveshafts, one-piece rear hub for increased durability
Clutch: 8,000 RPM with lightweight shoes and heavy-duty spring
Engine: HPI fuelie K26 2-stroke gasoline engine with pull starter
Fuel Tank: 24oz (700cc)
Wheels: Front 4.7 x 2.4" (119 x 61mm), rear 4.7 x 3" (119 x 76mm)
Specifications:
Wheelbase: 22.5" (571mm)
Ground Clearance: 2.4" (61mm)