NITRO PLANES
AND GAS


Ultimate 40S ( Yellow ) A009SY
 
Wing Span : 42.0 in / 1060 mm Wing Area : 578 sq in / 37.3 sq dm Flying Weight : 4.5lbs / 2025 g Fuselage Length : 39.5 in / 1000 mm Engine Required : 2C 0.40 cu in : 4C 0.48 cu in Radio Required : 4 channels, 4 servos 
 
 

Ultimate 40S ( Purple ) A009SP
 
Wing Span : 42.0 in / 1060 mm Wing Area : 578 sq in / 37.3 sq dm Flying Weight : 4.5lbs / 2025 g Fuselage Length : 39.5 in / 1000 mm Engine Required : 2C 0.40 cu in : 4C 0.48 cu in Radio Required : 4 channels, 4 servos 
 

AIRBORNE MODELS
Scale aerobatics Wing span : 80.5 in. Wing area : 1175 sq. in. Flying weight 15 lbs. Engine : 1.60 2 stroke Radio : 4 channels, 6 servos 
Extra 300S ( Purple ) A120RP

Slick 540 46 

Code No. : 
GA050

Wing Span : 58 in / 1480 mm
Wing Area : 651 sq in / 42 sq dm
Flying Weight : 4.9 lb / 2250 g
Fuselage Length : 51.5 in / 1310 mm
Requires : 2-stroke 0.46-0.55 or 4-stroke 0.70-0.81 engine,4-channel radio w/ 5 standard servos

Features:
- The most responsive and pilot friendly aerobatics aircraft. 
- Top quality balsa and plywood construction. 
- Covered with pre-painted genuine heat shrink covering. 
- Pre-painted fiberglass cowling. 
- Detachable 2 piece wings with self-tightening latching system to ensure tight fit of wings to fuselage flight after flight. 
- Carbon fiber wing joiner. 
- Black anodized aluminum landing gear. 


50cc Slick 540
Code No. : GA047
Wing Span : 86 in / 2185 mm
Wing Area : 1408 sq in / 91 sq dm
Flying Weight : 18 lb / 8.2 kg
Fuselage Length : 82 in / 2085 mm
Engine Required : 50cc gasoline engine 
Radio Required : 4-channel radio w/ 6~7 high torque servos


The most responsive and pilot friendly aerobatics aircraft.
Detachable 2 piece wings and stabilizer.
Carbon fiber wing joiner and spinner.
Black anodized aluminium landing gear
Removable lower fiberglass cowling for easy access to engine.


The Original R/C Combat Gremlin INSTOCK 35.00
​This is the original R/C Combat Gremlin used in streamer combat contests since 1991. Designed to be a durable every day flier, the Gremlin gained national attention after it was flown in a streamer combat demo at the 1992 NATS, and was featured in an R/C Modeler construction article in the December 1992 issue. We have been providing cores since that article appeared, and over the years have introduced additional kit options including precut fuselages, full wood kits, andThe Gremlin is a unique looking yet stable plane that flies like it is on rails with the correct CG. More importantly, it is a fun plane to just take out and blast holes in the sky. While not a beginner airplane, it can be flown by anyone who is comfortable with an aileron trainer. It is a great winter "snow" plane since it just gets tossed into the air and doesn't need a clear footstep free section of runway. It needs no setup beyond fueling and can be put back in the car with no need for disassembling. It's a great everyday plane: toss it in the car, get a few flights at lunchtime and then head back to work. The electric option opens many more fields due to the absence of noise without any sacrifice in performance. The Gremlin is even used in pylon racing events and has been used by clubs to familiarize pylon judges with calling for their course on setup days. It might not be the only plane you fly, but it will earn its place when you are packing the car to head to the field.  finally prebuilt, almost ready-to-cover versions. 


  This is the Radio Controlled, Glow Powered, Ready to Fly  
  Avistar Elite from Great Planes.  
  Ideal step up from a flat bottom wing trainer,  
  or suitable as a first airplane with the help of an instructor.  
   
FEATURES: Construction: Balsa and ply  
  Wing: Two-piece with aluminum joiner tube, optional flaps  
  Aileron Control: Dual servo  
  Covering: Top Flite MonoKote  
  Fuel Tank: Approximately 8oz (240cc)  
  Radio: Tactic TTX600 6-channel 2.4GHz, with trainer system and five  
  standard servos  
  Engine: O.S. .46AXII AB with muffler  
  Engine Mount: Aluminum with with rubber isolation boots  
  Propeller: 12x5  
  Spinner: 2.5" (63.5mm) diameter red plastic  
  Landing Gear: Prebent aluminum with two 2.5" (64mm) main foam wheels 
  and 2" (51mm) nose wheel  
  Warranty: Great Planes Model Manufacturing Company guarantees this  
  kit to be free from defects in both materials and workmanship at  
  the date of purchase. This warranty does not cover any parts  
  damaged by use or modification.  
   
INCLUDES: RTF Avistar Elite, O.S. .46AXII AB Engine with Muffler, Prop, 2.4GHz 
  Radio System w/four standard Servos, eight AA Batteries, Spinner,  
  and Instruction Manual  
   
REQUIRES: Fuel: Airplane blend with 5%-20% nitromethane  
  OR, if electric power is desired,  
  RimFire .46 (42-60-800) outrunner brushless motor, GPMG4725, this  
  motor includes a mount and prop adapter  
  ESC: 60A brushless compatible (GPMM1850) if using motor listed above 
  Battery: 5-6S LiPo  
  Battery Charger: Compatible with selected LiPo  
  LiPo charging bag  
  Propeller: Compatible with selected motor  
  Building and field equipment  
   
SPECS: Wingspan: 62.5" (1590mm)  
  Wing Area: 672 in sq (43.3sq dm)  
  Wing Loading: 22-24 oz sq/ft (67-73 g sq/ft)  
  Weight: 6.5-7lbs (2950-3170g)  
  Length: 55" (1395mm)  
  Airfoil: Semi-symmetrical  
  Center of Gravity (CG): 3-5/16" (84mm) back from the leading edge of 
  the wing at the fuselage  
  Control Throws Low Rate High Rate  
  Elevator 5/16" (8mm) 11° 7/16" (11mm) 16°  
  Rudder 1/2" (13mm) 13° 7/8" (22mm) 22°  
  Ailerons 3/8" (10mm) 11° 9/16" (14mm) 17°  
   
​Avistar Elite .46 RTF GPMA1605
Ultra Stick 30cc ARF 81" (HAN2365)
instock 299.99
Key Features

Outstanding flight performance: tried and true Ultra Stick design
Flaps for expanded flight envelope
Covered in genuine UltraCote™
Tail dragger landing gear adds to its sportier looks
Large, double beveled control surfaces
Two piece plug in wings with aluminum tube provides easy transport and assembly
Lightweight balsa/balsa-plywood construction that's strong
Float-ready-hard points for mounting the Hangar 9® 1/5-scale Float Set (sold separately) are already built into the fuselage
Finished fiberglass wheel pants match UltraCote colors
Ready to mount the Evolution® 33GX Gasoline Engine
Electric motor mount included makes it EP friendly
Complete quality hardware included
Needed To Complete

Radio System
33GX Engine and Receiver Battery or Electric Power System
Tools and Adhesives for Assembly
Van's RV-4 30cc instock
 Features

Expertly constructed with laser-cut balsa and plywood
Two-piece, plug-in wing and horizontal stabilizer make field assembly fast
Functional flaps and scale hinges add realism and a wider flight envelope
Wide-track wheel stance and leaf tail wheel for outstanding ground handling
Painted fiberglass cowl and wheel pants
Matching aluminum landing gear with painted fairings
Large top-hatch provides easy access to electronics and flight batteries
Detailed cockpit area features a scale pilot, instrument decal and crystal-clear canopy
A self-aligning drill guide makes all recommended power options easy to install
Operational LED landing lights pre-wired and installed
Easy to maintain, genuine Hangar 9® UltraCote® covering
Military-style and civilian decals included for trim scheme customization
Includes motor mount for the electric power option
Complete hardware kit includes a matching spinner and painted fiberglass control horns
Needed to Complete
(1) 30cc two- or four-stroke gas/petrol engine or equivalent electric motor system
(1) Full-range, 6+ channel transmitter and receiver
(8) Standard digital servos (7 for the electric power option)
(2) Batteries for receiver and engine ignition (for the gas power option)
(1) Propeller
Valiant 10cc ARF, 69" (HAN5080), onorder 249.99
Key Features
Expertly constructed with lightweight, laser-cut balsa and plywood
Two-piece, cantilevered plug-in wing makes field assembly fast
Functional flaps expand the flight envelope and add STOL capability
Wide-track, painted aluminum landing gear for outstanding ground handling
Large front hatch provides easy access and fast flight battery changes
Painted fiberglass cowl and wheel pants
Crystal-clear canopy and side windows
Read to fly from water with the recommended float accessories (sold separately)
Easy to maintain, genuine Hangar 9® UltraCote® covering
Designed around the Evolution® 10cc gasoline engine
Electric motor mount included makes EP installation simple
Complete hardware kit includes a matching spinner
Needed to Complete
(1) 10cc two- or four-stroke gas/petrol engine or equivalent electric motor system
(1) Full-range, 6+ channel transmitter and receiver
(7) Standard-size servos (6 for the electric power option)
(2) Batteries for receiver and engine ignition (for the gas power option)
(1) Propeller
What's in the box?
(1) Hangar® 9 Valiant™ 10cc ARF Airplane
(1) User Manual
Home
Product List
TRAXXAS
GP/PLANES
HPI RACING
BOATS
AXIAL
seagull /SIG
QUADS
CHARGERS
PARK ZONE
HOBBYZONE
EFLITE
SPECTRUM
HITEC ACC
FPV
ARMA
FUTABA
losi
VENOM BATT