Home
Product List
TRAXXAS
GP/PLANES
HPI RACING
BOATS
AXIAL
seagull /SIG
QUADS
CHARGERS
PARK ZONE
HOBBYZONE
EFLITE
SPECTRUM
HITEC ACC
FPV
ARMA
FUTABA
losi
VENOM BATT

Great Planes P-51 Mustang Sport Scale GP/EP ARF INSTOCK GPMA1205 179.99
FEATURES: Construction: Balsa and ply
          Wings: Two-piece balsa sheeted foam with aluminum wing joiner
          Aileron Control: Dual servo
          Cowl: Painted fiberglass
          Canopy: Clear with painted frame lines and painted pilot bust
          Covering: Top Flite MonoKote
          Motor Mount: Assembled plywood
          Engine Mount: Two-piece adjustable nylon
          Landing Gear: Prebent wire
          Wheels: Three foam, two main 3" (76mm) diameter, one 1" (25.4mm)
            tailwheel
          Fuel Tank: 9.1oz (270cc)
          Spinner: 3" (76mm) plastic, blue in color
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            the date of purchase. This warranty does not cover any component
            parts damaged by use or modification

INCLUDES: ARF Great Planes P-51 Mustang Sport Scale Airplane with Pilot Bust,
            Fuel Tank, Wheels, Spinner, Motor Mount, Engine Mount, Decals and
            Instruction Manual

REQUIRES: Radio: At least 4-channel
          Servos: 4-5 standard size, ball bearing recommended (2-aileron, 1-
            rudder, 1-elevator, 1-throttle (if using glow engine)
          6" (152mm) Extensions: Two for aileron servos
          Y-Harness: One for aileron servos if using radio without mixing
            functions
            Glow Power-
          Engine: .40 - .55 cu in (6.5 - 9 cc) two stroke OR
                  .70 cu in (11.5cc) four-stroke, glow specific prop, fuel,
            Electric Power-
          Motor: Rimfire .55 (42-60-480) brushless outrunner with 13x10 prop,
            ESC, two LiPo Batteries and Charger
          Building and field equipment

SPECS:    Wingspan: 56" (1420mm)
          Length: 50" (1270mm)
          Wing Area: 543 sq in (35 sq dm)
          Wing Loading: 28 - 31oz/sq ft (85 - 95g/sq dm)
          Weight: 6.5 - 7.25lbs (2950 - 3290g)
          Center of Gravity (CG): 4-11/16" (119mm) back from the leading edge
            of the wing at the fuselage sides
          Configuration: Low wing
          Airfoil: Semi-symmetrical
            Control Throws-        Low Rate               High Rate
          Ailerons:             1/4"   (6mm) 9°        5/16"   (8mm) 11°
          Rudder:             1-7/16" (37mm) 27°     1-7/8"   (48mm) 36°
          Elevator:             5/16"  (8mm) 9°        7/16"  (11mm) 12°

FEATURES: Construction: AeroCell foam with pre-applied decals
          Wing: Two piece
          Aileron Control: Dual servo
          Lights: LED navigation and landing lights on wing
          Electronic Speed Control: 30 amp
          Servos: Four micro
          Motor: Brushless outrunner
          Landing Gear: Tricycle type with shock absorbing steerable nose gear
          Wheels: Three foam 1.5" (38mm) diameter
          Cowl: AeroCell foam, removable for motor access
          Spinner: 1.4" (35.45mm) diameter chrome plated plastic
          Propeller: 9x5
          Warranty: Hobbico guarantees this kit to be free from defects in both
            material and workmanship at the date of purchase. This warranty
            does not cover any component parts damaged by use or modification.

INCLUDES: FlyZone RXR Cessna 350 Corvalis, brushless motor, ESC, servos
            propeller, photo illustrated instruction manual, spinner, four
            micro servos

REQUIRES: Radio: At least 5-channel
          LiPo Battery: 1800mAh 11.1V, HCAA3840
          Battery Charger: LiPo compatible w/balancing capability, GPMM3319
          Pliers and phillips screwdriver

SPECS:    Wingspan: 57" (1450mm)
          Wing Area: 362 sq in (23.3) sq dm
          RTF Weight: 2 - 2.5lbs (910 - 1020g)
          Wing Loading: 13-14 oz/sq ft (40-43 g/sq dm)
          Length: 38" (965mm)
          Center of Gravity (CG): 1-7/16" - 2-1/2" (37 -64mm) from the leading
            edge of the wing at the fuselage
            Control Throws-
          Elevator, up/down: 15/32" (10mm) 13°
          Ailerons, up/down: 9/16" (14mm) 21°
          Rudder, right/left: 1" (25mm) 31°
          Flaps: 13/16" (21mm) 14°


Hobbico FlyZone Cessna 350 Corvalis Rx-R 57 OUT OF STOCK FLZA4300 279.99 FLZA 4304 DISC R-RX 179.99 SALE 145.00 2 LEFT
Great Planes Phazer EDF Sport Jet EP ARF 23 INSTOCK 179.99
FEATURES: Construction: Fiberglass fuselage and tail fin with molded-in inlets
            and exhaust tube
          Wings: Delta design, light balsa and ply construction, joiner tube
            for easy attachment to fuselage, wing skids help model track
            straight
          Covering: Top Flite Monokote
          Motor: Ammo 24-45-3790kV brushless, GPMG5185
          Ducted Fan: Great Planes ElectriFly HyperFlow 56mm Ducted Fan System,
            GPMG3910
          Canopy: Magnetically attached, doubles as a battery hatch
          Decals: Two sets to decorate in a sport or military look
          Lanuch System: May be hand or bungee launched
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            the date of purchase. This warranty does not cover any component
            parts damaged by use or modification.

INCLUDES: ARF Phazer Ducted Fan Jet with Brushless Motor, Ducted Fan Unit,
            Bungee Launch Kit, Decals, Balance Stand and Gauge, Instruction
            Manual

REQUIRES: Radio: 4-channel with elevon or ailevator mixing
          Servos: Two micro
          Extensions: Two 3-4"
          ESC: 35A brushless compatible
          Battery: 4S 14.8V 30C LiPo at least 2200mAh
          Battery Charger: Lipo compatible with balancing capabilities
          Building and Field Equipment

SPECS:    Wingspan: 23" (585mm)
          Wing Area: 224 sq in (14.4 sq dm)
          Weight: 30-31.5 oz (850 - 895 g)
          Wing Loading: 19.3 - 20.2 oz/sq ft (59 - 62 g/sq dm)
          Length: 30" (760mm)
          Center of Gravity (CG): Key pointed ends of the balance stand into
            middle holes of wing support, then flip assembly over to see where
            model balances. CG may be shifted 5/16" (8mm) forward or backward

Flyzone DHC-2 Beaver Select Scale FLZA4022 209.99 ON ORDER/ RTF INSTOCK,FLZA4024, 299.99
FEATURES: Construction: AeroCell foam with pre-applied decals and tinted
            plastic windows at canopy area
          Wing: One-piece design with functional struts and ailerons and flaps
            with drop hinges
          Motor: 41-19-850 outrunner brushless
          Receiver: Tactic 2.4GHz SLT
          Servos: Four micro
          ESC: 40A
          Landing Gear: Prebent aluminum with foam wheels, steerable tail wheel
            also includes floats for water takeoffs and landings and rudders
            on floats for better handling
          Propeller: 12x6
          Spinner:
          Lights: Navigation and landing lights
          Warranty: FlyZone guarantees this kit to be free from defects in both
            material and workmanship at the date of purchase. This warranty
            does not cover any component parts damaged by use or modification.

INCLUDES: FlyZone Tx-R DHC-2 Beaver Select Scale Airplane with Brushless Motor,
            ESC, four Servos, SLT Receiver, Propeller, Instruction Manual,
            Spinner, Landing Gear with Floats

REQUIRES: Tactic AnyLink SLT 2.4GHz Radio Adapter (TACJ2000) to adapt aircraft
            transmitter (the Futaba Square, TACM0001 and JR, Spektrum, TACM0002
            are included with the AnyLink adapter)
            *Tactic 2.4GHz 4 or 6 channel transmitters do not require the
            AnyLink adapter
          LiPo Battery: 11.1V 1800mAh 20C
          Battery Charger: AC/DC balancing charger
          Building and field equipment

SPECS:    Wingspan: 59.5" (1510mm)
          Wing Area: 430 sq in (27.7 sq dm)
          Weight: 3-3.25 lb (1360 - 1470 g)
          Wing Loading: 16-17 oz/sq ft (49-52 g/sq dm)
          Length: 38.5" (980mm)
          Center of Gravity (CG): Between 2 - 2.5" (51 - 64mm) back from
            leading edge of wing measured at fuselage sides
          Control Throws:        Low Rate             High Rate
          Elevator Up & Down:   5/16" (8mm) 8°       7/16" (11mm) 10°
          Ailerons Up & Down:   3/8" (10mm) 14°      1/2" (13mm)  20°

FEATURES: Construction: All-wood, built-up airframe, white in color
          Wing: Two piece with composite wing joiner
          Aileron Control: Single servo
          Cowl: Fiberglass
          Wheel Pants: Fiberglass
          Motor Mount: Plywood, designed to accept Great Planes Rimfire or
            OS motors
          Spinner: White plastic, 1.75" (44.4mm) diameter
          Canopy: Plastic construction, magnetic attachment
          Landing Gear: Two-piece prebent with 2.4" (61mm) main foam wheels and
            1" (26mm) tailwheel
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            the date of purchase. This warranty does not cover any component
            parts damaged by use or modification

Great Planes Proud Bird EF1 Racer Sport ARF GPMA 1260
149.99 




REQUIRES: Radio: 4-channel with 3 micro servos
          Brushless motor: .25
          ESC: 60A or greater
          Battery: 14.8V 2200-2600mAh LiPo
          Battery Charger: To match selected battery
          Propeller: 8x8E or 9x9E thin electric
          LiPo Chrging Bag and building and field equipment

SPECS:    Wingspan: 51.9" (1319mm)
          Wing Area: 388 sq in (25 sq dm)
          Weight: 3.0-3.5 lb (1360-1590 g)
          Wing Loading: 18-21 oz/sq ft (55-64 g/sq dm)
          Length: 40" (1015mm)
          Center of Gravity (CG): 3-7/8" (98mm) back from the leading edge of
            the wing at the fuselage side
          Control Throws           Low Rate               High Rate
            Elevator-Up/Down,    1/8" (3mm) 5°          3/16" (5mm) 7°
            Rudder-Right & Left, 1/2" (13mm) 18°        3/4"  (19mm) 27°
            Ailerons-Up/Down,    1/4" (6mm) 11°         3/8"  (10mm) 17°

Flyzone Corsair F4U Select Scale EP Tx-R 48.5"
FLZA4032 229.99 INSTOCK

FEATURES: Construction: AeroCell foam, factory painted, molded-in panel lines
          Motor: Brushless 35-36-920kV
          Landing Gear: Rotating retractable with functional doors
          Servos: Five micro
          Receiver: SLT
          Propeller: 12x6 plastic, black in color

REQUIRES: Transmitter: 5-6 channel
          Battery: 3S 11.1V LiPo, at least 2100mAh
          Battery Charger: Compatible with selected LiPo battery
          AA Batteries: Number depending on transmitter used

Wingspan: 18.1 in (460 mm), Wing Area: 182 in2 (11.7 dm2), Weight: 6.2 oz (176 g), Wing Loading: 4.9 oz/ft2 (15.0 g/dm2), Length: 19.3 in (489 mm)
Features

Magnets in the rudder and battery hatch help you finish assembly and change packs in record time.

A finger hole on the underside of the fuselage provides a firm grip for easy hand launches. Give the Eraze a toss, and you're airborne!

Flyzone Tidewater Seaplane EP RTF INSTOCK 259.99 FLZA3330
Eraze™ Brushless 2.4GHz RTF INSTOCK 149.99, SALE 114.99 2 LEFT
FEATURES: Construction: Foam
          Wing: One-piece with motor and pod, wing attaches to fuselage with
            1/4-20x2 nylon wing bolt
          Aileron Control: Dual servo
          Motor: 28-30-1300 kV brushless outrunner
          Radio: Tactic 2.4GHz TTX404 4-channel transmitter with TR624
            6-channel receiver
          Electronic Speed Control: 30A
          Servos: Micro
          Battery: ElectriFly 3S 11.1V 2200mAh 30C with Deans Ultra Plug
          Battery Charger: Great Planes 3S balancing LiPo Smart Charger
          Propeller: 9x4.5 ElectriFly PowerFlow Slo-Flyer, plastic construction
          Spinner: --" (--mm)
          Landing Gear: Two tip floats on either side of wing
          Warranty: Flyzone guarantees this kit to be free from defects in both
            material and workmanship at the date of purchase. This warranty
            does not cover any component parts damaged by use or
            modification.

Flyzone Tidewater Seaplane EP Tx-R INSTOCK 169.99 FLZA3332
Great Planes Escapade MX GP/EP ARF
GPMA1202 ON ORDER 139.99 


FEATURES: Construction: Built-up balsa and plywood
          Wing: Two-piece with wing tube
          Covering: Top Flite MonoKote
          Engine Mount: Two-piece nylon
          Motor Mount: Plywood
          Fuel Tank: --oz
          Landing Gear: Prebent aluminum with --" diameter wheels
            --" diameter tailwheel
          Wheel Pants: Fiberglass
          Canopy: Clear, attaches to fuselage with magnets and provides
            access to radio gear and battery
          Spinner: Black plastic --" diameter
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            the date of purchase. This warranty does not cover any component
            parts damaged by use or modification


INCLUDES: ARF Escapade MX Airplane with Spinner, Motor Mount, Engine Mount
            Spinner, Landing Gear, Hardware, and Instruction Manual


REQUIRES: Radio: 4-channel
          Servos: Two 40 oz-in standard size for elevator & rudder
                  Two 40 oz-in standard size for aileron
                  One 40 oz-in standard size/throttle (if using glow engine)
          6" (152mm) Extension
          Dual Servo Extension
            If using Glow Power:
          Engine: .46-.55 cu in (7.45- 9.0cc) two stroke OR
                  .52-.70 cu in (8.5 - 11.1cc) four stroke
          Glow starter, fuel, fuel tubing, fuel pump, fuel can fittings
          Propeller: 11x7 sport
            If using brushless electric power:
          Motor: Great Planes RimFire .46-.55
          ESC: 60A
          Propeller: 11x7 electric
          Battery: 4S 3350mAh 14.8V LiPo
          Adapter: Deans Female Ultra
          Battery Charger: Compatible with selected battery


SPECS:    Wingspan: 52" (1320mm)
          Wing Area: 449 sq dm (29 sq dm)
          Wing Loading: 26-28 oz/sq ft (79-85 g/sq dm)
          Length: 45" (1145mm)
          Weight: 5 - 5.5 lb (2270-2490 g)
          Configuration:
          Airfoil:
          CG (Center of Gravity): 2.75" (70mm) back from the leading edge at
            the fuselage
          Control Surface Throws:    Low Rate                 High Rate
           Elevator               3/4" (19mm) 18°          7/8" (23mm) 19°
           Rudder              1-3/16" (30mm) 18°        1-3/4" (44mm) 29°
           Ailerons              5/16" (8mm)  11°   
Curtiss P-6E Hawk EP Biplane ARF,GPMA1164
SALE 210.00 WAS 249.99

Stock Number: GPMA1164
Wingspan: 43.5 in (1105 mm)
Wing Area: 352 in² (22.7 dm²)
Weight: 3.75-4.5 lb (1700-2040 g)
Wing Loading: 25-29 oz/ft² (76-88 g/dm²)
Length: 34 in (865 mm)
Requires: Radio system with a minimum of 4-channels, 4 micro servos, 42-50-800kV brushless outrunner motor, 45A brushless ESC, 11.1V 2200mAh LiPo battery and charger

Flyzone Island Wings DHC-2 Beaver Rx-R 59.5"
OUT OF STOCK ,199.99 FLZA 4024
  This is the Brushless Powered, Radio Controlled  
  Rx-R Island Wings DHC-2 Beaver Bush Plane from Flyzone.  
  This version includes motor, ESC and servos.  

  **Additional Technical Info Will Be Added When It Becomes Available.**  

FEATURES: Construction: AeroCell foam  
  Wing: Two-piece with carbon fiber spars, hinged flaps  
  Motor: Brushless  
  Electronic Speed Control: 40A  
  Servos:  
  Landing Gear: Conventional landing gear with tundra-style tires, and 
  floats with water rudders, steerable tailwheel  
  Stabilizer: Carbon fiber reinforced  
  Propeller:  
  Spinner:  
  Battery Hatch: Easy access on bottom of fuselage  
  Warranty: Flyzone guarantees this kit to be free from defects in both
  material and workmanship at the date of purchase. This warranty  
  does not cover any component parts damaged by use or modification. 

INCLUDES:  

REQUIRES: Radio: 4+-channel  
  Battery: 11.1V 1800mAh LiPo  
  Battery Charger: LiPo compatible  
  Tools and field equipment  

SPECS: Length: 38.5" (980mm)  
  Wingspan: 59.5" (1510mm)  
  Weight: 48-52 oz (1360-1470 g)  
  Center of Gravity:  
Great Planes Extra 300SP EP ARF, GPMA1022 219.99, OUT OF STOCK

FEATURES
Construction: Balsa and ply
Covering: Top Flite MonoKote
Wing: Two-piece with carbon fiber joiner
Cowl: Painted fiberglass
Hatch: Secures to fuselage with magnets, includes painted pilot bust
Spinner: --" (--mm) diameter
Landing Gear: Prebent aluminum
Wheel Pants: Painted fiberglass
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase. This warranty does not cover any component
parts damaged by use or modification.

REQUIREMENTS
Radio: 4-ch minimum, or 5-ch w/mixing capabilities
Motor: Great Planes RimFire .32 (42-50-800)
Battery: 3S - 4S LiPo
Battery Charger: To match selected battery
SPECIFICATIONS
Wingspan: 50" (1270mm)
Wing Area: 478 sq in (30.8 sq dm)
Wing Loading: 16 - 19oz sq/ft (46 - 49g sq dm)
Length: 47.8" (1215mm)
Weight: 3.5 - 4.0lbs (1590 - 1810g)




Features: 90 mph (145 km/h)
Jet performance comes from a proven power trio: a high-performance ElectriFly Ammo 24-45-3790 brushless in-runner motor, 35A ESC with Star Plug, and 56 mm HyperFlow ducted fan
Optimized ducting provides exceptionally clean airflow to boost takeoff performance and airspeeds
Molded from crash-tough, feather-light AeroCell™ foam
Fuselage section can be removed easily but holds tight in flight, even at top speeds
Realistic cockpit features twin instrument panels as well as two painted pilot figures. Magnets hold the cockpit and fan hatch firmly in place during flight, while allowing both to be quickly removed for battery pack changes or maintenance
Magnetically-attached tip tanks add authentic in-flight appearance, but will break free during rough landings to prevent damage
Four micro servos and pushrods are factory-installed
With a wingspan of 25 inches, the L-39 is easy to carry and transport
Lightweight stand can be used for display or convenient work platform at the field


Specifications:
Wingspan: 25 in (635 mm) 
Wing Area: 141 in² (9.1 dm²) 
Wing Loading: 24.5-25.5 oz/ft² (75-78 g/dm²) 
Length: 31 in (780 mm)
Weight Range: 24-25 oz (680-710 g)

Requirements:
4-channel radio (TACJ2650)
Micro receiver (TACL0625)
4S 2200mAh LiPo battery pack (GPMP0862 or FPWP3224)
WARNING: The L-39 requires advanced flying skills and is not suitable for beginning or intermediate pilots. It reaches speeds approaching 93 mph and should be flown only at an AMA-chartered club's flying site. Because it can quickly disappear from sight, pilots should remain focused on the plane at all times.


Zero Select Scale RxR FLZA4324 199.99 INSTOCK
 This is the electric powered, radio controlled, Tx-R Prime  
  Select Scale A6M2 Zero from Flyzone.  
  This is the Rx-R (Receiver Ready) version that requires receiver,  
  battery and charger.  
  Includes motor, ESC and servos.  
   
FEATURES: Construction: AeroCell foam  
  Wing: One piece, with ailerons and flaps  
  Aileron Control: Dual servo  
  Motor: 1000kV brushless 77g outrunner  
  ESC: 40A  
  Landing Gear: Electric retractable, 2" (51mm) diameter main wheels  
  prebent tail torque rod with 0.75" (19mm) diameter steerable tail  
  wheel  
  Bomb: AeroCell foam  
  To release the bomb remotely, a 7-channel transmitter and receiver  
  will be required. Or, the flap servo may be disconnected from the  
  receiver, making a vacant channel available for the bomb release.  
  This method disables the flaps. Or, the flap and bomb servos may be
  connected.  
  Propeller: 10x6 three blade  
  Spinner: Plastic 2" (51mm) diameter, black in color  
  Warranty: FlyZone guarantees this kit to be free from defects in both
  material and workmanship at the date of purchase. This warranty  
  does not cover any component parts damaged by use or modification. 
   
INCLUDES: Tx-R Prime Select Scale Zero with Motor, ESC, SLT Receiver, Servos  
  Propeller, Spinner, Bomb & Bomb Drop Mechanism, Pilot Figure  
  Navigation Lights and Instruction Manual  
Seawind EP Select Scale Rx-R FLZA4054 229.99 instock
Double click here to add text. This is the Flyzone Radio Controlled, Brushless Electric Powered,  
  Receiver Ready (RxR) Seawind EP Select Scale Airplane.  
  This is the Rx-R (Receiver Ready) version that requires receiver,  
  battery and charger.  
  Includes motor, ESC and servos.  
  For ages 14 and over.  
   
FEATURES: Construction: Reinforced AeroCell foam airframe with large double  
  beveled control surfaces  
  Wing: Removable two-piece, tool free twist and lock wing attachment  
  system, scale Fowler flaps add authenticity and improve  
  aerodynamics, carbon fiber wing tube  
  Aileron Control: Dual servo  
  Motor: 41-19-900Kv brushless  
  Electronic Speed Control: 40A  
  Servos: Five 9g micro for control surfaces, one 17g for nose wheel  
  retract, one 36g for main gear retract  
  Hatch: Magnetically attached, clear plastic windshield  
  Landing Gear: Mechanical retracts with speed reduction unit, allows  
  for take off of a surfaced runway and then landing on water or vice
  versa  
  Wheels: Three foam, 2" (51mm) diameter  
  Water Rudder: Plastic construction, deploys when landing gear is up, 
  and retracts when gear is down  
  Lighting System: Navigation and landing lights  
  Spinner: AeroCell foam, white in color, 1.6" (41mm) diameter  
  Propeller: 11.5x6 plastic, black in color  
  Warranty: Flyzone guarantees this kit to be free from defects in both
  material and workmanship at the date of purchase. This warranty  
  does not cover any component parts damaged by use or modification. 
   
INCLUDES: RxR Seawind EP Select Scale Airplane, Detailed Interior with four  
  Seats, two Spinners, Y-Harness, Brushless Motor, 40A ESC, 
Stinson Voyager EP RTF
INSTOCK 69.99 

TECH NOTES

  This is the Electric Powered, 2.4GHz Radio Controlled,  
  Ready to Fly Dromida Voyager Airplane.  
  For indoor flight or outdoor flight in calm conditions.  
   
FEATURES: Construction: Foam with scale details such as wing rib detail, wheel 
  pants and panel lines  
  Wing: One-piece  
  Motor: Brush equipped  
  Radio: Dromida Q410 2.4GHz 4-channel SLT compatible, with rudder,  
  elevator and throttle control, digital trims and built-in LiPo  
  charger  
  Battery: 3.7V 1S 150mAh LiPo  
  Landing Gear:  
   
INCLUDES: RTF Dromida Voyager Airplane with Motor, Radio, LiPo Battery and  
  4 AA Batteries  
   
SPECS: Wingspan: 19.5" (495mm)  
  Weight: 1.9oz (54g)  
  Length: 15" (381mm)  
Propeller Stinson Voyager EP RTF (2) INSTOCK 5.99
FLZA4634 INSTOCK, 149.99 
Mini Switch 2-in-1 Sport EP RTF,FLZA3320. 219.99
INSTOCK

TECH NOTES


  Flyzone Mini Switch Trainer.  
  High wing mounting position offers stability for beginners  
  and is easily switchable to a more aerobatic low wing position  
  as beginners increase their flying skills.  

FEATURES: Construction: Aerocell foam  
  Wing: Two-piece with carbon wing joiner, can be mounted in either  
  a mid wing configuration or high-wing configuration with a  
  different canopy, plug and lock attachment  
  Aileron Control: Dual servo  
  Landing Gear: Prebent aluminum  
  Wheels: Main, foam 1.4" (36mm) diameter, 0.61" (15.5mm) diameter tail
  wheel  
  Wheel Pants: Foam  
  Cowl: Molded plastic  
  Radio: Tactic 2.4GHz TTX404 with digital aileron, elevator and rudder
  trim (analog throttle trim)  
  Electronic Speed Control: 20 amp  
  Spinner: Plastic, 1.5" (38mm) black in color  
  Motor: 28-30-1100kV brushless  
  Battery: 3S 11.1V 1300mAh LiPo  
  Battery Charger: ElectriFly 3S smart charger with AC/DC adapters  
  Propeller: 8x6 plastic  
  Warranty: Flyzone guarantees this kit to be free from defects in both
  material and workmanship at the date of purchase. This warranty  
  does not cover any component parts damaged by use or modification. 

INCLUDES: Flyzone Mini Switch Trainer with 2.4GHz radio system, ESC, Motor,  
  Battery, Battery Charger, Propeller, Prop Adapter, Spinner,  
  Instruction Manual, four AA Batteries, High Wing and Low Wing  
  Canopies  
Great Planes Extra 300SP GP/EP ARF 55"
  
FEATURES: Construction: Balsa and ply
          Wings: Two-piece with aluminum joiner tube
          Radio Compartment: Plywood reinforced, accessible under canopy
          Canopy: Single, clear plastic (pilot figure shown in photos not
            included)
          Aileron Control: Dual servo
          Covering : Top Flite MonoKote
          Cowl: Painted fiberglass
          Landing Gear: Painted aluminum 0.12" (3.2mm) thick
          Wheels: Foam, main 2.25" (57mm) diameter, 1" (25.4mm) diameter
            tailwheel
          Wheel Pants: Painted fiberglass
          Fuel Tank: 10.8oz (320cc)
          Spinner: White plastic 2.5" (63mm) diameter
          Building Time: Ready to fly in 20-25 hours
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit free from defects in both materials and workmanship at
            the date of purchase.

INCLUDES: Great Planes Extra 300SP ARF Sport Airplane with wheels, spinner,
            2-pc engine mount, two decal sheets, fuel tank, pushrods, all
            hardware and instruction manual

SPECS:    Wingspan: 49.5" (1255mm)                                             
          Wing Area: 586 in² (37.8 dm²)                                        
          Weight: 5-5.5 lb (2,270-2,490 g)                                     
          Wing Loading: 20-22 oz/ft² (61-67 g/dm²)                             
          Length: 46" (1,170mm)                                                
          Center of Gravity (CG): 3-1/4" (83mm) back from the leading edge of  
            the wing at the fuselage side                                      
          Control Throws:           Low Rate             High Rate             
            Elevator Up & Down:   5/8" (16mm) 12°      3/4"   (19mm) 15°       
            Rudder Right & Left:  1"   (25mm) 11°      2-5/8" (67mm) 31°       
            Ailerons Up & Down:   5/8" (16mm) 10°      15/16" (24mm) 15°   
FEATURES: Construction: Built-up balsa and ply                                 
          Wing: Two-piece with joiner tube                                     
          Aileron Control: Dual servo                                          
          Covering: Top Flite MonoKote                                         
          Cowl: Painted fiberglass                                             
          Canopy: Clear plastic with painted pilot bust, lifts off for access  
            to radio gear compartment                                          
          Landing Gear: --" (--mm) thick aluminum                              
          Wheels: --" (--mm) diameter                                          
          Wheel Pants: Painted fiberglass                                      
          Fuel Tank: --oz (--cc)                
REQUIRES: Radio: At least four channel                                         
          Servos: Five standard ball bearing                                   
          6" (152mm) Servo Extensions: Two for ailerons                        
          Y Harness: For aileron servos if using radio with no mixing functions
          Engine: .46-.55 cu in (7.5-9cc) 2-stroke OR .70-.72 cu in (11.5-12cc)
            4-stroke                                                           
          Muffler: Pitts style                                                 
          Building and field equuipmen
Stinger II .46 ARF instock
Great Planes Escapade Sport/Aerobatic GP/EP ARF 68
FEATURES: Construction:
            with prehinged control surfaces and self-aligning tail surfaces
          Wings: Two-piece with joiner
          Cowl: Painted fiberglass
          Pilot Bust: Painted and installed
          Landing Gear: Prebent aluminum --" (--mm) thick
          Wheels: Main, --" (--mm) diameter with --" (--mm) tailwheel
          Wheel Pants: Painted fiberglass
          Fuel Tank: --oz (--cc)
          Completion Time: Approximately 4-6 hours


REQUIRES: Radio: 4-channel
          Servos: 5 standard size
            Glow Power;
          Engine: .61-.95 cu in 2-stroke OR .91-1.20 cu in 4-stroke OR
          Propeller: To match selected engine
            Brushless Electric Power;
          Motor: ElectriFly Rimfire 80 (GPMG4740)
          ESC: 60A  BL (GPMM1850)
          Battery: Two 3S 5000mAh 11.1V LiPos
          Battery Charger: To match selected batteries
          Propeller: 15x8E

SPECS:    Wingspan: 68" (1725mm)
          Wing Area: 813 in² (52.4 dm²)
          Weight: 8.25 - 9.0 lb (3.7 - 4.1 kg)
          Wing Loading: 23 - 26 oz/ft² (70-79 g/dm²)
          Length: 58.5" (1485mm)


Great Planes Escapade Low Wing Sport GP/EP ARF 52.5" 

FEATURES: Construction: Balsa and ply
          Covering: Covered in Top Flite MonoKote
          Wings: One-piece with aluminum joiner tube
          Aileron Control: Modeler's choice of single or dual servo control
          Radio Compartment: Plywood reinforced
          Canopy: Single tinted, hatch attaches to fuselage with magnets,
            preinstalled painted pilot bust
          Fuel Tank: 9.1oz (270cc)
          Landing Gear: Left and right aluminum sections 0.12" (3mm) thick
          Wheels: Main, foam 3" (76mm) diameter, tailwheel 0.87" (22mm)
            diameter
          Wheel Pants: Painted fiberglass
          Spinner: Plastic, red in color 2.5" (63mm) diameter
          Engine Mount: Two-piece composite
          Motor Mount: Plywood
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            the date of purchase.

REQUIRES: Radio: 4-channel
          Servos: 3-5 standard size
          Engine .40 - .55 cu in (6.5 - 9.0cc) 2-stroke glow OR
                 .52 - .70 cu in (8.5 - 11.5cc) 4-stroke glow OR
          Electric Motor: .46 RimFire (42-60-800kV)
          Battery: 14.8V (4S) 3200mAh LiPo (if using electric motor)
          Electronic Speed Control: 60 amp (if using electric motor)
          Charger: LiPo compatible charger and cell balancer (if using electric
            motor)
          6" (152mm) Servo Extension: Two for single servo aileron control
            Dual Servo Extension required for dual servo aileron control
              1/4" foam rubber padding, propeller, building and field equipment

SPECS:    Wingspan:     52.5" (1340mm)
          Wing Area:    483 sq in (31.2 sq dm)
          Weight:       5.0 - 5.5lb (2270 - 2495g)
          Wing Loading: 24 - 26 oz/sq ft (73 - 80 g/sq dm)
          Length:       46" (1160mm)
          Airfoil: Semi-symmetrical, low wing configuration
          Center of Gravity: 2-1/2" (63mm) Back from the wing's leading edge
            at the fuselage sides.
          Control Throws-           Low Rate                High Rate
            Ailerons: Up & Down    1/4" (6mm)  11°        1/2" (13mm) 22°
            Elevator: Up & Down    3/4" (19mm) 15°      1-1/4" (32mm) 25°
            Rudder: Right & Left 1-1/4" (32mm) 17°      2"     (51mm) 26°







Great Planes Big Stik .60 ARF MonoKote .60-.91,66.5" INSTOCK

FEATURES: All wood construction that is 90% pre-built and pre-covered
            in Top Flite MonoKote. True Red TOPQ0227 and Jet White TOPQ0204
          Traditional trim scheme with Maltese Cross.
          Great Planes hardware Included,
          Dual Aileron Servo control

INCLUDES: Great Planes Nylon Adjustable Engine Mount, Fuel Tank, and
            2-3/8" Foam Wheels, Heavy Duty Aluminum Landing Gear,
            3½" Spinner, Hardware and Building Instruction Book.

SPECS:    Wingspan:  66.5in (1689mm)
          Wing Area: 1000 sq in (64.5dm2)
          Length:    59in (1499mm)
          Wing Loading: 15 oz/sq ft (45.7 g/dm2)
          Weight:    6.5lbs (2.95kg)
          Airfoil: Fully-Symmetrical High-Wing
          Engine:      .60-.91 2-stroke (10-15cc)
                    or .91-1.20 (15-20cc) 4-stroke
          Radio:  5 channel radio with 5 standard servos.
          Throws: Ele 1/2" up & down         CG: 4"- aft of LE @ fuse per
                  Rud 1-1/4" left & right       new manual,
                  Ail 5/16" up & down

Great Planes Big Stik .40 ARF MonoKote .40-.51,58.5"
FEATURES: Construction: All balsa and plywood
          Wings: One piece, all wood, held to fuselage with two included 1/4-20
            wing bolts. Fully symmetrical high-wing configuration.
          Covering: Factory applied adhesive backed MonoKote. Color scheme is
            Red with the Maltese Cross in Black set against a White background
            on the wings, tail section, and top of the fuselage behind the
            wing. For stock numbers of covering used, see COMMENTS.
          Radio Compartment: Easily accessible, plywood reinforced.
          Landing Gear: Pre-formed aluminum .12" (3mm) thick. Steerable .16"
            (4mm) thick pre-formed wire nose gear.
          Aileron Control: Dual standard size servos
          Building Time: Ready to fly in only 12-15 hours
          Warranty Period: Great Planes Model Manufacturing guarantees this kit
            free from defects in material and workmanship at purchase date.
            This warranty does not cover any components damaged by use
            or modification.

INCLUDES: One Great Planes ARF R/C Glow Powered Big Stik .40 Sport Airplane
            with pre-built and covered wings fuselage and tail assemblies,
            pushrods, pre-bent .012" (3mm) main landing gear, 2.75" (70mm) main
            wheels, nylon adjustable engine mount, 8.75oz (260cc) fuel tank,
            2.5" (64mm) spinner, plywood servo trays and wing joiners, hardware
            package, fuel tubing, and photo-illustrated instructions.

REQUIRES: Engine: .40-.51 cu in (6.5-8.5cc) 2-stroke
              OR  .50-.70 cu in (8.5-11.5cc) 4-stroke
          Muffler: Sports-Style, engine mounts in an upright position, stock
            muffler supplied with engine will work fine.
          Radio: Four channel.
          Servos: Standard (2-Aileron, 1-Elevator, 1-Throttle, 1-Rudder).
            (a high torque servo is suggested for the rudder, but not required)
          Servo Extensions: Two 6" (152mm).
          Y-Harness: One, for aileron servos.
          Misc. Items: Glow plug, ¼" foam rubber padding, medium fuel tubing,
            fuel filter, propeller, building and field equipment.

SPECS:    Wingspan:      59"        (1500mm)
          Wing Area:   757 sq in     (48.8 sq dm)
          Weight:        5.25- 6lbs (2.38 - 2.72kg)
          Wing Loading: 19.8 - 21.3 oz/sq ft (50 - 65 g/sq dm)
          Length:        51"        (1295mm)
          Airfoil: Fully-Symmetrical High Wing.
          Center of Gravity: 3.75" (95mm) Back from the wing's leading edge.
          Control Throws-          High Rate        Low Rate
            Elevator: Up & Down     .75" (19mm)     .62"   (16mm)
            Rudder: Right to Left  1.61" (41mm)       1" (25.4mm)
            Ailerons: Up & Down     .86" (22mm)     .62"   (16mm)


TOPA0704  Giant Scale Corsair ARF instock
  This is the Radio Controlled, Gasoline Powered, Almost Ready to Fly  
  Giant Scale Gold Edition F4U Corsair from Top Flite.  
  IMAA Legal  
   
FEATURES: Construction: Balsa and plywood with molded-in panel and cowl flap  
  lines  
  Covering: Top Flite flat finish MonoKote  
  Wings: Balsa and ply with aluminum wing joiners, main landing  
  gear is located on inner wing panel and remains in place when the  
  outer panels are removed allowing the fuselage to be walked to and 
  from the field  
  Aileron Control: Dual servo, prehinged flaps on center section and  
  outer panel are linked with a phenolic tab, once linked they  
  function as one surface requiring only one servo per wing half  
  Cowl: Painted fiberglass with hidden mounting screws and replica  
  radial engine with pushrod tubes and spark plug wires  
  Cockpit: Detailed instrument panel with recessed gauges  
  Tail Cone: Painted fiberglass  
  Spinner: Two-piece machined aluminum hub  
  Gasoline Tank: Approximately 24oz (720cc)  
  Wheels: 4.5" (114mm) diameter main wheels, 2" (51mm) tail wheel  
  treaded rubber  
  **Does not include fixed landing gear**  
  Strut covers and functional tail wheel doors with reinforced mounts
  for Robart landing gear (not included)  
  Warranty: Top Flite Models guarantees this ARF to be free of defects 
  in material and workmanship at the date of purchase. This warranty 
  does not cover any component parts damaged by use or modification. 
   
INCLUDES: ARF Giant Scale Gold Edition F4U Corsair, Matte Finish Decals,  
  Radial Engine Details, Tail Cone, Cowl, Wheels,  
  Cockpit Interior, Work/Display Stand, Foam Work Mat and  
  Instruction Manual  
   
REQUIRES: Radio: 7-channel minimum  
  Servos: Three standard, eight high torque  
  Standard Servo for Air Control Valve (if using retracts)  
  Standard Servo for Throttle  
  Standard Servo for optional Choke  
  Two Servos w/at least 99 oz-in torque for Elevators  
  Two Servos w/at least 99 oz-in torque for Rudder  
  Two Servos w/at least 99 oz-in torque for Ailerons  
  Two Servos w/at least 99 oz-in torque for Flaps  
  Servo Extensions:  
  24" (610mm): Four heavy duty for ailerons and flaps  
  6" (152mm): Two heavy duty  
  Y-Harness: Three depending on reciver and number of channels used  
  Receiver Battery: At least 1000mAh  
  Engine: 3.0 - 4.0 cu in (50 - 55cc) gasoline powered  
  Building and field equipment  
   
SPECS: Wingspan: 86.5" (2195mm)  
  Wing Area: 1376 in² (88.8 dm²)  
  Weight: 23-25 lb (10.43-11.34 kg)  
  Wing Loading: 39-42 oz/ft² (119-128 g/dm²)  
  Length: 70" (1780mm)  
  Center of Gravity (CG): 5-3/4" (146mm) back from the leading edge of 
  the wing at the fuselage sides  
  Control Throws: High Rate Low Rate  
  Elevator 3/4" (19mm) 11° 1/2" (13mm) 7°  
  Rudder 2-1/4" (57mm) 22° 1-3/4" (44mm) 17°  
  Ailerons 1" (25mm) 21° 3/4" (19mm) 16°  
  Flaps 1-1/2" (38mm) 30°  
   
COMMENTS: Pilot figure shown in photos not included  
  Following is the Top Flite MonoKote color used on this model and  
  order number for 6' roll;  
  Flat Insignia Blue, TOPQ0507  
  If a replacement fuel tank is needed, the Great Planes 24 oz  
  (GPMQ4112) can be used. This tank is compatible with gasoline but  
  the fuel line supplied with the tank is NOT and will have to be  
  replaced with gasoline safe fuel tubing (GPMQ4135). Some trimming  
  and modifiction may be required when installing replacement fuel  
  tank.  
  Distance between the firewall and the cowl opening  
  is 7-1/8" (181mm)  
.Escapade MX 30cc EP ARF
instock, GPMA1210, 329.99 
Calypso EP Glider Tx-R flza3002 instock, 179.99
  This is the Brushless Electric Powered, 2.4GHz Radio Controlled, Tx-R  
  Calypso Glider from Flyzone.  
  For beginning to experienced glider pilots.  
   
  This is the Tx-R (Transmitter Ready) version that includes servos,  
  an ESC and SLT receiver.  
  May be flown with any compatible transmitter with the  
  SLT (Secure Link Technology) system such as the Tactic TTX410, TACJ2410.  
   
FEATURES: Construction: Aero-cell foam, white in color with green and black  
  trim  
  Wing: Two-piece  
  Aileron Control: Dual servo with flap option (SEE COMMENTS)  
  Motor: Brushless outrunner, 1300 Kv  
  Electronic Speed Control: 18A  
  Servos: Four micro (2-ailerons, 1-rudder, 1-elevator)  
  Battery: 11.1V15C 1300mAh LiPo  
  Battery Charger: 12V DC powered balancing charger with two LEDs to  
  indicate charge status (for AC Adapter, order GPMM3310)  
  Battery Compartment: Located under canopy  
  Landing Gear: Landing wheel with nose and tail skid plates  
  Warranty: Flyzone guarantees this kit to be free from defects in both
  material and workmanship at the date of purchase. This warranty  
  does not cover any component parts damaged by use or modification. 
   
INCLUDES: Flyzone Calypso Glider with 4-ch SLT Micro RX, ESC, Motor, Folding  
  Prop, Flight Battery, DC Battery Charger, 3 Servos and Instruction 
  Manual  
   
REQUIRES: Compatible with SLT transmitter with at least 4 channels  
   
SPECS: Wingspan: 73" (1855mm)  
  Wing Area: 526 sq in (33.9 sq dm)  
  Length: 47" (1195mm)  
  RTF Weight: 29oz (820g)  
  Center of Gravity (CG): 1/4" (6.5mm) ahead of spar  
  Control Throws: High Rate Low Rate  
  Elevator, Up/Down: 3/4" (19mm) 18° 1/2" (13mm) 12°  
  Rudder, Right/Left: 1" (25mm) 19° 3/4" (19mm) 14°  
  Ailerons, Up/Down: 5/8" (16mm) 19° 3/8" (10mm) 11°  
  Flap: 7/8" (22mm) 22°  
   
.P-38 Lightning Micro EP RTF, FLZA2310 139.99, SALE 99.99 DISC.

TECH NOTES

  This is the Electric Powered, 2.4GHz Radio Controlled  
  Ready to Fly P-38 Lightning Micro Warbird from Flyzone.  
   
FEATURES: Construction: Foam, may be repaired with thick foam-safe CA  
  Wing: One-piece  
  Radio: Tactic TTX402 2.4GHz SLT with built-in LiPo battery charger  
  Motors: Brushed  
  Propellers: Two counter rotating 3 blade  
  Nose Cone: Removable for access to battery  
  Battery: 1S 3.7V 250mAh 20C LiPo  
  Landing Gear: Prebent with steerable nosegear and three 0.61"  
  (15.5mm) foam wheels  
  Pilot Figure: Painted  
  Warranty: Flyzone guarantees this kit to be free from defects in both
  material and workmanship at the date of purchase. This warranty  
  does not cover any component parts damaged by use or modification. 
   
INCLUDES: RTR P-38 Lightning Micro Warbird, with Tactic TTX402 Radio System,  
  LiPo Battery, five AA Batteries, Pilot Figure, and Instruction  
  Manual  
​P-38 Lightning Micro Tx-R
FLZA2312 129.99, SALE 89.99 DISC.
Piper Super Cub Select Scale Tx-R, FLZA4012. 159.99 INSTOCK 
  This is the electric powered, radio controlled, Tx-R (Transmitter Ready)  
  FlyZone Piper Super Cub Select.  
  Park Pilot Program Legal Aircraft  
  This is the Tx-R (Transmitter Ready) version that includes servos,  
  an ESC and SLT receiver.  
  May be flown with any compatible transmitter with the  
  SLT (Secure Link Technology) system such as the Tactic TTX450, TACJ2404.  
   
FEATURES: Construction: AeroCell foam with pre-applied decals  
  Wing: One-piece design with functional struts and molded wing ribs  
  for scale authenticity  
  Electronic Speed Control: 18 amp Tactic BL-18, TACM6610  
  Receiver: Tactic 2.4GHz SLT  
  Servos: Three micro  
  Motor: Brushless outrunner, 1144kV  
  LiPo Battery: 3S 11.1V, FLZA6052  
  Battery Charger: LiPo compatible w/balancing capability, GPMM3318  
  Landing Gear: Preassembled with yellow plastic wheel pants  
  Wheels: Foam, two main 1.6" (40mm) diameter  
  Canopy: Plastic tinted windows, instrument panel in cockpit  
  Spinner: Rubber, yellow in color 0.52" (3.2mm) diameter  
  Propeller: 8x4  
  Warranty: Hobbico guarantees this kit to be free from defects in both
  material and workmanship at the date of purchase. This warranty  
  does not cover any component parts damaged by use or modification. 
   
INCLUDES: FlyZone Tx-R Piper Super Cub Select, brushless motor, ESC, servos,  
  SLT receiver, propeller, photo illustrated instruction manual,  
  spinner, battery and charger  
   
REQUIRES: Compatible SLT transmitter with at least 4 channels  
  Building and field equipment  
   
SPECS: Wingspan: 48" (1220mm)  
  Wing Area: 354 sq in (22.8) sq dm  
  RTF Weight: 30.4oz (860g)  
  Wing Loading: 12.4 oz/sq ft (38 g/sq dm)  
  Length: 33" (840mm)  
  Center of Gravity (CG): --" (--mm) from the leading edge of the  
  wing at the fuselage  
  Control Throws-  
  Elevator, up/down: 3/8" (9.5mm) 9°  
  Ailerons, up/down: 1/2" (12.7mm) 17°  
  Rudder, right/left: 1-1/4" (32mm) 30°  
   
Micro Se5a WWI TxR
FLZA2052 DISC, 69.99 1 LEFT 
 This is the Electric Powered, Radio Controlled, Tx-R (Transmitter Ready)  
  Flyzone Micro S.E.5a WWI Fighter Plane.  
  For indoor flying or outdoor flying in light winds.  
   
  This is the Tx-R (Transmitter Ready) version that includes servos,  
  an ESC and SLT receiver.  
  May be flown with any compatible transmitter with the  
  SLT (Secure Link Technology) system such as the Tactic TTX404, TACJ2404.  
   
FEATURES: Construction: Foam  
  Motor: Brushed  
  Battery: 3.7V 140mAh LiPo  
  Battery Charger: DC powered 3.7V 1-cell 250mA  
  Propeller: Black plastic, 117x64mm  
  Warranty: Flyzone guarantees this kit to be free from defects in both
  material and workmanship at the date of purchase. This warranty  
  does not cover any component parts damaged by use or modification. 
   
Micro Calypso TxR, FLZA3052, 64.99
INSTOCK
Double click here to add text.
TECH NOTES

  This is the Radio Controlled, Electric Powered, Tx-R (Transmitter Ready)  
  Flyzone Micro Calypso Sailplane.  
   
  This is the Tx-R (Transmitter Ready) version that includes  
  servo/SLT receiver and ESC.  
  May be flown with any compatible transmitter with the  
  SLT (Secure Link Technology) system.  
   
FEATURES: Construction: Tough lightweight foam  
  Wing: One-piece, attaches with magnets  
  Battery: 3.7V 1S LiPo 200mAh  
  Battery Charger: USB  
  Propeller: 5x3.5" folding type, black in color  
  Motor: Micro size, power rating not supplied by manufacturer  
  Assembly Time: Approximately five minutes  
  Warranty: Flyzone guarantees this kit to be free from defects in both
  material and workmanship at the date of purchase. This warranty  
  does not cover any component parts damaged by use or modification. 
   
INCLUDES: Preassembled Wing, Fuselage and Tail Assemblies, LiPo Battery, USB  
  Charger, Propeller, Instruction Manual  
   
REQUIRES: Transmitter: 4-channel SLT Radio such as FLZA6484  
  AA Batteries: Four for transmitter  
   
SPECS: Wingspan: 24.8" (630mm)  
  Wing Area: 66.2 sq in (4.27 sq dm)  
  Wing Loading: 4.15 oz sq/ft (12.65 g sq/dm)  
  Length: 19.1" (485mm)  
  RTF Weight: 1.9 oz (54 g)  
  CG: 1.49" (38mm)  
Micro DH.82 Tiger Moth Biplane Tx-R, DISC FLZA2062 74.99, SALE 50.00 1 LEFT
Double click here to add text.
TECH NOTES

This is the electric powered, 2.4GHz radio controlled, Tx-R (Transmitter Ready)
  Tiger Moth Biplane from Flyzone.  
   
  This is the Tx-R (Transmitter Ready) version that includes servos,  
  an ESC and SLT receiver.  
  May be flown with any compatible transmitter with the  
  SLT (Secure Link Technology) system such as the Tactic TTX404, TACJ2404.  
   
FEATURES: Construction: Foam  
  Wings: One piece  
  Motor: 7mm brushed  
  Servos: Two micro  
  ESC: Integrated with receiver  
  Battery: 3.7V 140mAh LiPo  
  Battery Charger: Flyzone 1S micro LiPO battery charger, powered by  
  five AA batteries (included)  
  Landing Gear: Plastic with 0.71" (18mm) foam wheels  
  Propeller: Black plastic 117x64mm  
  Warranty: Flyzone guarantees this kit to be free from defects in both
  material and workmanship at the date of purchase. This warranty  
  does not cover any component parts damaged by use or modification. 
   
INCLUDES: Tx-R Tiger Moth Biplane, Motor, Servos, ESC, 2 Pilot Figures, Battery
  Battery Charger, SLT Receiver, 5 AA Batteries, Propeller,  
  and Instruction Manual  
Micro Nieuport 17 WWI TxR, DISC FLZA 2042 79.99, SALE 50.00, 2 LEFT

  This is the electric powered Tx-R (Transmitter Ready)  
  Nieuport 17 WWI Micro Park Flyer from Flyzone.  
   
  This is the Tx-R (Transmitter Ready) version that includes servos,  
  an ESC and SLT receiver.  
  May be flown with any compatible transmitter with the  
  SLT (Secure Link Technology) system such as the Tactic TTX404, TACJ2404.  
   
FEATURES: Construction: Foam, with replica engine, pilot bust, machine gun and 
  authentic WWI trim scheme  
  Receiver: Tactic 2.4GHz SLT receiver  
  Battery: 3.7V 140mAh LiPo  
  Battery Charger: DC powered, 250mAh output  
  Propeller: Black plastic 117x64mm  
   
INCLUDES: Flyzone Tx-R Nieuport 17 WWI Micro Park Flyer, LiPo Battery, Charger,
  Prop, 5 AA batteries, and Instruction Manual  
   
REQUIRES: Compatible SLT transmitter with at least 3 channels  
   
SPECS: Length: 12.5" (3175mm)  
  Weight: 1.16oz (33g)  
  Wingspan: 15.3" (388.6mm)  
   
COMMENTS: Pilot bust requires installation and painting  
  It is a good idea to have some needle  
  nose pliers for making adjustments to the  
  linkages if necessary  
   
   
Select Scale Cessna 182 Skylane Tx-R, FLZA 4002 INSTOCK 199.99 

  This is the electric powered, radio controlled, Tx-R (Transmitter Ready)  
  FlyZone Cessna 182 Skylane Select.  
  For beginning to intermediate flyers.  

  This is the Tx-R (Transmitter Ready) version that includes servos,  
  an ESC and SLT receiver.  
  May be flown with any compatible transmitter with the  
  SLT (Secure Link Technology) system such as the Tactic TTX650, TACJ2650.  

FEATURES: Construction: AeroCell foam with pre-applied decals  
  Wing: One-piece design with functional flaps and ailerons, wing  
  attaches with two bolts  
  Electronic Speed Control: 18 amp Tactic BL-18, TACM6610  
  Servos: Four, 1 rudder, 1 elevator, 1 aileron and 1 flap  
  Motor: Brushless outrunner, FLZA6082  
  Receiver: Tactic 2.4GHz SLT receiver  
  Battery: 11.1V 1800mAh LiPo  
  Battery Charger: Balancing capable with AC/DC adapters  
  Lights: Red and green blinking navigation lights on wing and tail  
  Landing Gear: Prebent aluminum 0.08" (2mm) thick, tricycle style  
  with spring loaded steerable nose gear  
  Wheels: Foam, two main 1.75" (38mm) diameter, 1.75" (38mm) nose wheel
  Canopy: Plastic tinted windows, instrument panel in cockpit  
  Spinner: 1.4" (35.8mm) diameter chrome finish plastic  
  Warranty: Flyzone guarantees this kit free from defects in both  
  material and workmanship at the date of purchase. This warranty  
  does not cover any component parts damaged by use or modification. 

INCLUDES: FlyZone TxR Cessna 182 Skylane Select, brushless motor, ESC, servos  
  navigation lights, photo illustrated instruction manual, RX,  
  spinner and propeller  

REQUIRES: Transmitter: 6-channel SLT transmitter  
  Building and field equipment  

SPECS: Wingspan: 47.5" (1207mm)  
  Wing Area: 339 sq in (21.87) sq dm  
  Weight: 37oz (1049g)  
  Wing Loading: 15.72 oz/sq ft (48 g/sq dm)  
  Length: 39" (991mm)  
  Center of Gravity (CG): 1-7/8" (48mm) from the leading edge of the  
  wing at the fuselage  
  Control Throws-  
  Elevator: 11/16" (17.5mm) up and down  
  Ailerons: 5/16" (7.9mm) up and down  
  Rudder: 13/16" (20.6mm) right and left  
  Flap Throw: 3/8" (10mm) down  


Sensei FS EP Trainer w/WISE Gyro RTF,FLZA3030 299.99 INSTOCK
 This is the 2.4GHz Radio Controlled, Brushless Electric Powered, Ready to Fly 
 Sensei FS Trainer Airplane with WISE Flight Stabilization System from Flyzone.

FEATURES: Stabilization System: WISE 3-axis with three flight modes; Beginner  
  Intermediate, Advanced and Bailout Switch that immediately returns 
  aircraft to straight and level flight from any orientation and  
  from any of the three flight modes  
  Construction: AeroCell foam with pre-applied trim scheme, drop door  
  in fuselage opens from 5th channel of radio  
  Wing: Two-piece bolt together  
  Motor: Brushless outrunner  
  Radio: 6-channel 2.4GHz Tactic TTX610 system with SLT receiver  
  and five micro servos  
  LiPo Battery: 3S 2100mAh  
  Battery Charger: AC/DC powered with balancing capability  
  Landing Gear: One-piece aluminum, 2.5" (63mm) diameter main and  
  nose gear wheels, prebent wire nosegear  
  Drop Door: Near main landing gear in fuselage, operates from 5th  
  channel for inflight deployment of parachute, candy or other items 
  Tail Section: Self-aligning, attaches to fuselage with one screw  

INCLUDES: RTF Sensei FS Trainer Airplane with WISE Flight Stabilization,  
  Motor, ESC, Battery, Radio, five Micro Servos, four AA Batteries
Sensei FS EP Trainer w/WISE Gyro RxR FLZA3034, 199.99 OUT OF STOCK


  This is the Radio Controlled, Electric or Gasoline Powered  
  Almost Ready to Fly Escapade MX Sport Airplane from Great Planes.  

FEATURES: Construction: Balsa and ply  
  Wing: Two-piece with carbon wing joiner  
  Aileron Control: Dual servo  
  Covering: Top Flite MonoKote  
  Cowl: Painted fiberglass  
  Canopy: Clear, painted pilot figure  
  Wheel Pants: Painted fiberglass  
  Spinner: 3.25" (82mm) aluminum, polished natural finish  
  Landing Gear: Main, two-piece prebent aluminum 3.5" (89mm) diameter  
  foam wheels, 1.5" (38mm) diameter foam tailwheel  
  Fuel Tank: 14oz (420cc)  
  Motor Mount: Plywood  
  Engine Mount: Plywood  

INCLUDES: ARF Escapade MX with Landing Gear, Wheels, Cowl, Wheel Pants, Decals,
  Spinner, Pilot Figure, Instruction Manual  

REQUIRES: Radio: At least 4-channels  
  Servos: 5-9  
  24" Servo Extensions: Two  
  6" Servo Extensions: Two  
  Y-Harnesses: Two  
  Receiver Battery: At least 1300mAh  
  Electric Power;  
  Brushless Motor: 63-62-250kV Great Planes RimFire 1.60 recommended  
  ESC: 80A  
  LiPo Batteries: Two 18.5V 5000mAh  
  Propeller: 18x8  
  Battery Charger: To match selected LiPo batteries  
  Charging bag, building & field equipment  
  Gasoline Power;  
  Engine: 1.8-2.1 cu in (30-35 cc) gasoline engine  
  Propeller: To match selected engine  
  Servo: Standard size and torque for throttle, additional servo  
  required if cchoke is used  
  Ignition Battery: 6V, at least 1300mAH  
  Building and field equipment  

SPECS: Wingspan: 80" (2030mm)  
  Wing Area: 1184 sq in (76.4 sq dm)  
  Wing Loading: 25-27 oz sq ft (76-82 g sq dm)  
  Length: 67" (1700mm)  
  Weight: 12.75 - 13.75lbs (5780 - 6230g)  
  Center of Gravity (CG): 4-7/16" (113mm) - 5-1/8" (130mm) back from  
  the leading edge of the wing measured at the fuselage  
  Control Throws: High Rate Low Rate  
  Elevator up/down: 7/8" (22mm) 13° 5/8" (16mm) 9°  
  Rudder right/left: 2" (51mm) 19° 1-3/4" (44mm) 17°  
  Ailerons up/down: 3/4" (19mm) 17° 1/2" (13mm) 12°  
  Flaps down: 7/8" (22mm) 20°  
  Mix in approximately 5/16" (8mm) down elevator with the flap  
  This reduces balloning when flaps are applied  

COMMENTS: Following are the Top Flite MonoKote colors used to cover this model 
  and order numbers for 6' rolls  
  Jet White, TOPQ0204 Dove Gray, TOPQ0211  
  Black, TOPQ0208 True Red, TOPQ0227  

Micro Calypso RTF, FLZA3050, INSTOCK 79.99 
Micro B-25 Mitchell RTF SLT, FLZA2300 119.99 INSTOCK
Double click here to add text.
TECH NOTES

  This is the Radio Controlled, Electric Powered,  
  Ready to Fly Flyzone Micro B-25 Mitchell WW II Bomber.  
  For Indoor or Outdoor Flights.  
   
FEATURES: Construction: Foam  
  Radio: Tactic TTX403 SLT with built-in charger on rear of transmitter
  for included 1S LiPo battry  
  Servos: Micro  
  LiPo Battery: 1S 3.7V 250mAh, 20C discharge rate  
  Canopy: Clear molded plastic for cockpit and gun turret with  
  painted-on frame lines, battery installs under canopy  
  Propellers: 3-blade counter rotating  
  Landing Gear: Pre bent wire with two 1" (25.4mm) main wheels,  
  steerable nose gear, 0.63" (16mm) nose wheel  
  Warranty: Flyzone guarantees this kit to be free from defects in both
  material and workmanship at the date of purchase. This warranty  
  does not cover any component parts damaged by use or modification. 
   
INCLUDES: Prebuilt Wing Fuselage and Tail Assemblies. Landing Gear, Wheels,  
  Cockpit, Gun Turret, two Propellers, two Motors, ESC, Servos, LiPo 
  Battery, five AA Batteries, Transmitter, Instruction Manual  
   
SPECS: Wingspan: 21.7" (552mm)  
  Weight: 2.7-2.9oz (77-82g)  
  Length: 17.2" (437mm)  
  Wing Area: 63.6 sq in (4.1 sq dm)  
  Wing Loading: 6.1-6.6 oz sq ft (19-20g sq dm)  
  CG: 1" (26mm) back from the leading edge at the fuse
PT-19s turned thousands of raw recruits into combat-ready fighter pilots for WWII. Now, this iconic titan of the air is ready to send you into the clouds, as well. It's not a trainer, but pilots with a little time behind the sticks will love the way it handles in the air. Plus, much of the assembly is already completed for you. Put it in the air and experience the "Cradle of Heroes" today.
Double click here to add text.

Specifications:
Wingspan: 56.5 in (1435 mm)
Wing Area: 536.7 in2 (34.62 dm2)
Weight: 80-88 oz (2.3-2.5 kg)
Wing Loading: 21.5-23.6 oz/ft2 (65.5-72 g/dm2)
Length: 46.2 in (1173 m
PT-19 Sport Scale .46/EP ARF, GPMA1212 ON ORDER