Features
Fiberglass fuselage with accurate flowing lines.
Assembles quickly using high-quality ARF workmanship.
Surprisingly lightweight for its 50" wingspan.
Performs well with small, economical brushless components.
Two-piece wing simplifies transportation and storage.
Built-up wood wing and tail surfaces covered with MonoKote®.
Factory-hinged ailerons reduce assembly time.
Servo locations are easily accessible for linkage setup and adjustment.
Detailed cockpit with smoked windshield and decal of modern instrument panel.
Cockpit doubles as a removable hatch for easy access to the on-board battery and electronics.
High quality aluminum landing gear with fiberglass wheel pants.
Steerable nose wheel and smooth nose gear fairing.
SPECIFICATIONS
Wingspan: 50.5 in (1285 mm)
Wing Area: 305 in² (19.7 dm²)
Weight: 2.5-3 lb (1130-1360 g)
Wing Loading: 19-23 oz/ft² (58-70 g/dm²)
Length: 36 in (915 mm)
Requires: Radio system with a minimum of 4 channels; 4 nano servos; .10 outrunner brushless motor; 35A brushless ESC; 11.1V 1500-3350mAh LiPo battery & charger.
Recommended Products
FUTL7627 Futaba® R617 2.4GHz FASST™ Receiver
GPMG4595 ElectriFly™ RimFire™ .10 Outrunner Brushless Motor
GPMM1830 ElectriFly Silver Series 35A Brushless ESC
GPMM1210 (4) ElectriFly ES50 Nano Servos
HCAM2100 (2) Hobbico® 12" (305 mm) Servo Extensions
APCQ4123 APC 10 x 7 Thin Electric Propeller
Great Britain's "J-3 Cub".
By 1930, Geoffrey de Havilland's one- and two-seat civilian biplanes had grown so popular in England that virtually any kind of private airplane was called a "Moth" — much as, in America, any small plane was automatically a "Cub".
The prototype of the DH 82 Tiger Moth made its debut flight on October 26, 1931. The Royal Air Force took notice and began using Tiger Moths for elementary pilot training. By the end of World War II, de Havilland had delivered more than 4,200 to the RAF. About 3,000 more were built in Australia, Canada and New Zealand for Commonwealth Air Training.
Eventually, over 8,700 de Havilland DH 82 Tiger Moths would be manufactured. Of them, more than 250 are still considered airworthy.
SPECIFICATIONS
Stock Number: GPMA1134
Wingspan: 30 in (760 mm)
Wing Area: 282 in² (18.2 dm²)
Weight: 8.1 oz (230 g)
Wing Loading: 4.1 oz/ft² (13 g/dm²)
Length: 24.5 in (620 mm)
Requires: 3-channel radio with 2 pico servos; outrunner brushless motor; 8A brushless ESC; 7.4V 300mAh LiPo battery
Product Recommendations:
Please note: all recommendations were the best choices available at the time this product was released. For additional choices, ask your local hobby dealer.
Recommended Products
FUTK6900 Futaba® FASST™ 6-Channel Radio
FUTL7624 Futaba R6004FF Indoor Micro 4-Channel 2.4GHz FASST™ Receiver
GPMG4502 ElectriFly™ Rimfire™ 250 Outrunner Brushless Motor
GPMM1800 ElectriFly Silver Series 8A Brushless Electronic Speed Control
GPMP0700 ElectriFly BP Series 7.4V 300mAh Balanced 20C LiPo Battery
GPMM1200 ES-40 Servos (2)
Recommended Options
GPMM3155 ElectriFly Triton™ EQ AC/DC Equalizing Charger, Discharger & Cycler
For the most complete list of required items, consult your instruction manual.
Revolutionary realism in a classic military trainer. $64.99 instock
Easy to fly, like the 1930s RAF biplane.
State-of-the-art design improves scale detail.
Fly indoors or outside in calm winds.
Optional rigging shown (not included) may be added following directions in the instruction manual
Great Planes VFO Sport/3D EP ARF 26.5" instock $35.99
FEATURES : Construction: Foam with carbon fiber bracing
Ideal for sport, 3D stunts and learning how to hover
Oversize control surfaces
Plywood motor mount
Building Time: Ready to fly in less than an hour
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase.
SPECS: Wingspan: 26.5" (675mm)
Wing Area: 382 sq in (24.6 sq dm)
Weight: 9 - 10oz (255 - 285g)
Wing Loading: 3.4 - 3.8 oz/sq ft (10 - 12 g/sq dm)
Length: 29.5" (750mm)
Center of Gravity: Mark lines on bottom of wing on both sides of the
fuselage 12" (305mm) back from the nose of the fuselage
Control Throws- (measured at the widest part
REQUIRE S: Radio: 6-7 channel with mixing capabilities, 6-channel receiver
Servos: Four micro with at least 19 oz-in torque
ESC: ElectriFly 12A (GPMM1810)
Motor: ElectriFly Rimfire Brushless (28-22-1380) GPMG4505
Battery: 11.1V LiPo 300mAh (GPMP0701)
Propeller: 9 x 4.7 (APCQ5010)
Hobbico NexSTAR Mini 2.4GHz EP RTF
$ 269.99 instock
FEATURES: Construction: Built-up wood
Wings: Two piece, precision airfoil with SpinControl Airfoil
Extensions provide lift even in a stall to keep the NexSTAR Mini EP
level and the pilot in control.
PivotFlex Wing Mounting System fastens with one nylon bolt, a
rubber retainer and pivoting channel absorb minor jolts of normal
use, more severe jolts cause the wing to separate from the fuselage
and escape the full force of impact.
Airspeed Restrictor: SpeedBrakes Training Flaps attach to forward
section of wing near fuselage and hold airspeed to a minimum to
insure smooth landings, removeable as pilot skills increase.
Covering: Top Flite MonoKote
Landing Gear: Main, composite plastic construction, nose, 0.08" (2mm)
diameter steel wire
Wheels: Three foam 1.5" (38mm) diameter
Battery: SuperTigre 1250mAh 15C 11.1V LiPo
Battery Charger: 3S LiPo balancing DC powered charger with car
adapter
Radio: Tactic TTX440 2.4GHz 4-channel
Servos: Four ElectriFly Nano size, 2-aileron, 1-elevator, 1-rudder
Motor: SuperTigre 400 size brushless
Electronic Speed Control: SuperTigre 20A
Propeller: Plastic, 9x6E
Building Time: Ready to fly in 30 minutes with only a screwdriver-no
gluing required
Warranty Period: Hobbico guarantees this kit free from defects in
both material and workmanship at the date of purchase. This
warranty does not cover any component part damaged by use or
modification.
INCLUDES: Hobbico RTF NexSTAR Mini EP, motor, ESC, 2.4GHz radio, servos, prop
4 AA batteries, spinner, landing gear and instruction manual
SPECS: Wingspan: 44" (1120mm)
Wing Area: 296 sq in (19.1 sq dm)
Wing Loading: 12.2 - 13.6 oz/sq ft (37 - 42 g/sq dm)
Length: 36.5" (925mm)
Weight: 25 - 28 oz (710 - 790 g)
Airfoil: Flat bottom, high wing mount
Center of Gravity (CG): No numerical value given-follow directions on
page 10 of manual to set CG
Control Throws-Factory set, changes not recommended
Elevator-Up, Down: 3/8" (10mm) 16°
Rudder-Right, Left: 5/16" (8mm) 13°
Ailerons-Up, Down: 7/16" (11mm) 15°
Great Planes SPAD XIII WWI Parkflyer EP ARF 34"
out fo stock $110.99
FEATURES: Construction: Laser cut balsa and plywood
Wings: One piece each bi-wing configuration with painted cabanes and
interplane struts
Covering: Factory applied Top Flite MonoKote
Battery Compartment:
Cowling: Vacuum formed plastic, radiator design with plywood frame
Landing Gear: Pre-bent and factory painted
Wheels: Two 3" (76mm) diameter lightweight foam tires on wheels
Aileron Control: Dual servo on top wing
Pilot Bust: Painted
Hardware: Complete package designed for light weight and precise
control response
Building Time: Ready to fly in 6-8 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at
the date of purchase.
SPECS: Wingspan: 34" (865mm)
Wing Area: 390 sq in (25.2 sq dm)
Weight: 22.4 - 25.2oz (635 - 715g)
Wing Loading: 8.3 - 9.3 oz sq ft (25 - 28 g/sq dm)
Length: 27" (685mm)
Airfoil: Flat bottom
Center of Gravity: 2-1/8" (54mm) Back from the wing's leading edge
Control Throws- Low Rate High Rate
Elevator: Up & Down 13° 3/8" (10mm) 18° 9/16" (14mm)
Rudder: Right to Left 13° 3/4" (19mm) 17° 7/8" (22mm)
Ailerons: Up & Down 10° 1/2" (13mm) 20° 7/8" (22mm)
REQUIRES : Motor: ElectriFly RimFire 28-30-950 Brushless - GPMG4560
Propeller: 10x3.5 - GPMQ6655
Prop Adapter: 3mm - GPMQ4959
Speed Control: ElectriFly Silver Series SS-25 - GPMM1820
Motor to Speed Control Connector: GPMM3122
Radio: 4-Channel - FUTJ36** (radio system includes two servos)
Servos: 4-Micro (2-ailerons, 1-rudder, 1-elevator) - FUTM0414
Y-Harness: One for aileron servos - HCAM2500
Battery: LiPo 1250mAh 11.1V 15C discharge w/balance - GPMP0713
Battery Charger: LiPo compatible
Misc. Items: Building and Field Equipm
Hobbico FlyZone SkyFly Max 2.4GHz EP RTF w/Ailerons 47" INSTOCK $199.99
FEATURES: Construction: AeroCell foam
Wing: One-piece, constructed of foam, attaches with rubber bands,
plywood wing joiner
Aileron Control: Dual servo
Canopy: Molded into fuselage, opens for access to battery
Propeller: Plastic, 8x4
Radio: Tactic TTX404 4-channel 2.4GHz, with adjustable trims and four
micro servos, 6-channel receiver, elevator, rudder, throttle and
aileron control
Motor: Brushless
Speed Control: Electronic with auto cut-off
Battery: Flyzone 1800mAh 11.1V LiPo
Charger: ElectriFly 3S LiPo Balancing Smart Charger with AC/DC
adapter
Landing Gear: Prebent --" (--mm) diameter wire
Wheels: Two --" (--mm) diameter,
Color Scheme:
Tail Section: Conventional tail with rudder and elevator
Warranty: Hobbico® guarantees this kit to be free from defects in
both material and workmanship at the date of purchase. This
warranty does not cover any component parts damaged by use or
modification.
INCLUDES: Hobbico Flyzone Sky Fly Max Airplane with brushless motor, prop,
4-ch 2.4GHz radio, ESC, charger w/AC/DC adapter, LiPo battery
illustrated manual, four AA batteries
Hobbico FlyZone SkyFly Max 2.4GHz EP RTF w/Ailerons 47" INSTOCK $199.99
FEATURES: Construction: AeroCell foam
Wing: One-piece, constructed of foam, attaches with rubber bands,
plywood wing joiner
Aileron Control: Dual servo
Canopy: Molded into fuselage, opens for access to battery
Propeller: Plastic, 8x4
Radio: Tactic TTX404 4-channel 2.4GHz, with adjustable trims and four
micro servos, 6-channel receiver, elevator, rudder, throttle and
aileron control
Motor: Brushless
Speed Control: Electronic with auto cut-off
Battery: Flyzone 1800mAh 11.1V LiPo
Charger: ElectriFly 3S LiPo Balancing Smart Charger with AC/DC
adapter
Landing Gear: Prebent --" (--mm) diameter wire
Wheels: Two --" (--mm) diameter,
Color Scheme:
Tail Section: Conventional tail with rudder and elevator
Warranty: Hobbico® guarantees this kit to be free from defects in
both material and workmanship at the date of purchase. This
warranty does not cover any component parts damaged by use or
modification.
INCLUDES: Hobbico Flyzone Sky Fly Max Airplane with brushless motor, prop,
4-ch 2.4GHz radio, ESC, charger w/AC/DC adapter, LiPo battery
illustrated manual, four AA batteries
Cox Hobbies Sky Ranger EP 2.4GHz RTF 20"
FEATURES: Construction: Foam
Wing: One-piece, fastens to top of fuselage
Radio: 2.4GHz with low and high rate throw control, elevator, rudder
and aileron trim
Motor:
Battery: 2S 7.4V 250mAh LiPo, with balance connector
Battery Charger: 2S balancing type with AC power supply
Landing Gear: Prebent wire with three --" (--mm) wheels
Propeller:
Warranty: This kit is guaranteed to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover component parts damaged by use or modification.
INCLUDES: Cox Sky Ranger Park Flyer with 2.4GHz Radio System, LiPo Battery,
Charger with AC Power Supply, Prop, four AA batteries and
Instruction Manual
REQUIRES:
SPECS: Wingspan: 20" (508mm)
Weight: 2.2oz (62g)
Length: 15.5" (393mm)
Cox Hobbies Extra 300 EP 2.4GHz RTF 20"
FEATURES: Construction: Foam
Wing: One-piece, fastens to bottom of fuselage
Aileron Control: Single servo
Radio: 2.4GHz with low and high rate throw control, elevator, rudder
and aileron trim
Motor:
Battery: 2S 7.4V 250mAh LiPo, with balance connector
Battery Charger: 2S balancing type with AC power supply
Landing Gear: Prebent wire with --" (--mm) wheels
Propeller:
Warranty: This kit is guaranteed to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover component parts damaged by use or modification.
INCLUDES: Cox Extra 300 Park Flyer with 2.4GHz Radio System, LiPo Battery,
Charger with AC Power Supply, Prop, Instruction Manual and four
AA Batteries
REQUIRES:
SPECS: Wingspan: 20 in (508 mm)
Weight: 3.35 oz (94 g)
Great Planes P-51 Mustang Sport Scale GP/EP ARF INSTOCK
FEATURES: Construction: Balsa and ply
Wings: Two-piece balsa sheeted foam with aluminum wing joiner
Aileron Control: Dual servo
Cowl: Painted fiberglass
Canopy: Clear with painted frame lines and painted pilot bust
Covering: Top Flite MonoKote
Motor Mount: Assembled plywood
Engine Mount: Two-piece adjustable nylon
Landing Gear: Prebent wire
Wheels: Three foam, two main 3" (76mm) diameter, one 1" (25.4mm)
tailwheel
Fuel Tank: 9.1oz (270cc)
Spinner: 3" (76mm) plastic, blue in color
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase. This warranty does not cover any component
parts damaged by use or modification
INCLUDES: ARF Great Planes P-51 Mustang Sport Scale Airplane with Pilot Bust,
Fuel Tank, Wheels, Spinner, Motor Mount, Engine Mount, Decals and
Instruction Manual
REQUIRES: Radio: At least 4-channel
Servos: 4-5 standard size, ball bearing recommended (2-aileron, 1-
rudder, 1-elevator, 1-throttle (if using glow engine)
6" (152mm) Extensions: Two for aileron servos
Y-Harness: One for aileron servos if using radio without mixing
functions
Glow Power-
Engine: .40 - .55 cu in (6.5 - 9 cc) two stroke OR
.70 cu in (11.5cc) four-stroke, glow specific prop, fuel,
Electric Power-
Motor: Rimfire .55 (42-60-480) brushless outrunner with 13x10 prop,
ESC, two LiPo Batteries and Charger
Building and field equipment
SPECS : Wingspan: 56" (1420mm)
Length: 50" (1270mm)
Wing Area: 543 sq in (35 sq dm)
Wing Loading: 28 - 31oz/sq ft (85 - 95g/sq dm)
Weight: 6.5 - 7.25lbs (2950 - 3290g)
Center of Gravity (CG): 4-11/16" (119mm) back from the leading edge
of the wing at the fuselage sides
Configuration: Low wing
Airfoil: Semi-symmetrical
Control Throws- Low Rate High Rate
Ailerons: 1/4" (6mm) 9° 5/16" (8mm) 11°
Rudder: 1-7/16" (37mm) 27° 1-7/8" (48mm) 36°
Elevator: 5/16" (8mm) 9° 7/16" (11mm) 12°
Great Planes Syncro Electric Ducted Fan Glider ARF instock
FEATURES: C onstruction: AeroCell foam
Wings: Two sets, glider wing for long relaxing flights and sport wing
for jet-like graceful aerobatics
Power Pod: Ducted fan type, attaches to center of wings with magnets
and one bolt
Landing Gear: Removable tricycle style
Wheels: Three, two --" (--mm) diameter, one --" (--mm)
Battery Compartment: Large size allows easy access without removing
wing
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase.
INCLUDES:
REQUIRES : Radio: At least 4-channels
Servos: Six micro, two for plane and two for each wing
Brushless Motor
Electronic Speed Control: 25A brushless compatible
Battery: 11.1V 1800mAh LiPo
SPECS: Length: 24.5" (875mm)
Wingspan: Glider, 55.5" (1410mm)
Sport, 31.5" (800mm)
Wing Area: 400 sq in (25.8 sq dm)
219 sq in (14.1 sq dm)
Weight: Glider, 28.0 - 29.5oz (795 - 835g)
Sport, 22.5 - 24.0 (640 - 680g)
FEATURES : Construction: AeroCell foam with pre-applied decals
Wing: Two piece
Aileron Control: Dual servo
Lights: LED navigation and landing lights on wing
Electronic Speed Control: 30 amp
Servos: Four micro
Motor: Brushless outrunner
Landing Gear: Tricycle type with shock absorbing steerable nose gear
Wheels: Three foam 1.5" (38mm) diameter
Cowl: AeroCell foam, removable for motor access
Spinner: 1.4" (35.45mm) diameter chrome plated plastic
Propeller: 9x5
Warranty: Hobbico guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.
INCLUDES: FlyZone RXR Cessna 350 Corvalis, brushless motor, ESC, servos
propeller, photo illustrated instruction manual, spinner, four
micro servos
REQUIRES : Radio: At least 5-channel
LiPo Battery: 1800mAh 11.1V, HCAA3840
Battery Charger: LiPo compatible w/balancing capability, GPMM3319
Pliers and phillips screwdriver
SPECS : Wingspan: 57" (1450mm)
Wing Area: 362 sq in (23.3) sq dm
RTF Weight: 2 - 2.5lbs (910 - 1020g)
Wing Loading: 13-14 oz/sq ft (40-43 g/sq dm)
Length: 38" (965mm)
Center of Gravity (CG): 1-7/16" - 2-1/2" (37 -64mm) from the leading
edge of the wing at the fuselage
Control Throws-
Elevator, up/down: 15/32" (10mm) 13°
Ailerons, up/down: 9/16" (14mm) 21°
Rudder, right/left: 1" (25mm) 31°
Flaps: 13/16" (21mm) 14°
Hobbico FlyZone Cessna 350 Corvalis Rx-R 57 instock
Hobbico Flyzone Switch EP 2.4GHz RTF 45" instock $329.97 .
SPECS: Length: 42" (1065mm)
Wingspan: 45" (1145mm)
Wing Loading: 14oz sq/in (43g sq/dm)
Weight: 2.5lbs (1130g)
Center of Gravity (CG): Between 2-7/16" (62mm) and 3-1/2" (89mm) from
the leading edge of each wing panel measured at the fuselage sides
Control Throws: Set at factory. If the control throws are changed
(not recommended) or to check the throws, use the following
measurements;
Elevator: Up & Down 11/16" (17mm) 18°
Rudder: Right & Left 1-3/16" (30mm) 19°
Ailerons: Up & Down 7/16" (11mm) 16°
FEATURES: Construction: Aerocell foam
Wing: Two-piece with carbon wing joiner, can be mounted in either
a mid wing configuration or high-wing configuration with a
different canopy, plug and lock attachment
Aileron Control: Dual servo
Landing Gear: Main, prebent natural finish aluminum, 0.08" (2mm)
thick, 0.06" (1.5mm) tailwheel wire
Wheels: Foam, main 2.2" (55mm) diameter, 0.61" (15.5mm) tailwheel
Wheel Pants: Molded plastic
Cowl: Molded plastic
Radio: Tactic 2.4GHz TTX404 with digital aileron, elevator and rudder
trim (analog throttle trim)
Electronic Speed Control: SuperTigre 30 amp
Spinner: Red plastic, 1.5" (39mm)
Motor: SuperTigre 10 outrunner brushless (SUPG8050)
Battery: SuperTigre 3S 11.1V 1800mAh LiPo 15C 20Wh (SUPP1050)
Battery Charger: ElectriFly LiPo with AC and DC adapters, (GPMM3318)
Propeller: 10x5 plastic
Warranty: Hobbico guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.
The Switch Trainer EP Success Guarantee guarantees that you will
successfully learn to fly with this aircraft with its wing mounted
in the trainer (high wing) configuration or Hobby Services will
replace it with your choice of a Flyzone trainer of up to equal
value. You must fly at an AMA chartered field with an AMA certified
instructor within 60 days of purchase date and provide a statement
about the crash and signature from the pilot and instructor. This
Success Guarantee is not valid if the plane was flown in the
mid wing configuration.
Great Planes Seawind Seaplane EP Rx-R 39.5" instock
FEATURES: Construction: Aerocell foam, painted, color scheme is Blue and White
with Black and Orange stripes
Wings: One-piece
Motor: Great Planes ElectriFly Rimfire 28-30-950 Brushless Outrunner,
GPMG4560
Electronic Speed Control: Great Planes Silver Series 25A Brushless,
GPMM1820
Servos: Three ElectriFly ES50 Nano Servos, GPMM1210
Fuselage: Aerocell foam with plywood servo tray and
pushrods pre-installed
Radio Compartment: Accessible through removable canopy/hatch which is
secured by rare earth magnets
Cowling: Painted plastic
Canopy: Clear molded plastic with two profile pilot figures and
instrument panel detail
Aileron Control: Single servo
Propeller: Great Planes 8x6 Power Flow Slo-Flyer (GPMQ6610)
Spinner: Three, made of foam Blue in color 1.2" (30mm) diameter
Hardware: Full set included
Building Time: Ready to fly in 2-3 hours
Motor Mount: Constructed of plywood and pre-installed
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at
date of purchase.
.
INCLUDES : ElectriFly by Great Planes Seawind Sport Scale Seaplane, all hardware
photo-illustrated instructions, cradle support stand, 8x6 propeller
prop adapter, brushless outrunner motor, three nano servos,
electronic speed control and decals
REQUIRES: Radio: 4-channel with mini receiver
Servo Extension: One 6" (150mm) for aileron servo
Battery: 11.1V 910-1500mAh LiPo
Battery Charger: LiPo compatible
Misc. Items: Foam safe CA or epoxy glue and building and field
equipment
SPECS: Wingspan: 39.5" (1005mm)
Wing Area: 234 sq in (15.1 sq dm)
Weight: 24 - 26oz (680 - 735g)
Wing Loading: 14.8 - 16oz sq ft (45 - 49 g/sq dm)
Length: 33.5" (845mm)
Airfoil: Flat bottom
Center of Gravity: 1" (25.4mm) measured at fuselage when using
balancing stand
Control Throws- Low Rate High Rate
Ailerons: Up & Down ¼" (6.35mm) 7/16" (11mm)
Rudder: Right & Left 1" (25.4mm) 1¼" (38mm)
Elevator: Up & Down 3/8" (9.5mm) 5/8" (16mm)
FEATURES : Construction: AeroCell foam
Wing: Two-piece with carbon wing tube and one bolt attachment to
fuselage
Motor:
Aileron Control: Dual servo
Propeller:
Landing Gear: Prebent wire
Wheels: Foam --" (--mm) diameter
Spinner:
Servos:
SPECS: Wingspan: 40" (1015 mm)
Wing Area: 267 in² (17.2 dm²)
Weight: 20-22oz (565-605g)
Wing Loading: 10.8-11.5 oz/ft² (33-35 g/dm²)
Length: 32.5" (825mm)
Center of Gravity (CG): 2-5/8" (67mm) back from the leading edge of
the wing measured at the fuselage side
Control Throws- Low Rate High Rate
Elevator Up & Down: 1/4" (6mm) 7° 9/16" (14mm) 16°
Rudder Right & Left: 5/8" (16mm) 14° 7/8" (22mm) 19°
Ailerons up and Down: 7/32" (6mm) 9° 5/16" (8mm) 13°
REQUIRES : Radio: 4-channel transmitter and receiver
LiPo Battery: 1250-1300mAh 3S 11.1V, GPMP0505
Adapter: Deans Ultra Male to SuperTigre Female, if using battery
listed above
Battery Charger LiPo compatible
Building and field equipment
Great Planes Super Sportster EP Rx-R 129.99 IN STOCK
Hobbico Sensei Trainer EP RTF 58" INSTOCK
FEATURES: Construction: Aero-Cell foam with "drop door" in fuselage to deploy
a parachute or other creative payloads while in flight
Wings:
Aileron Control:
Motor: Brushless
Electronic Speed Control: 30A brushless compatible
Radio: Tactic 6-channel 2.4GHz
with five micro servos
Battery: 2100mAh 11.1V LiPo
Battery Charger:
Landing Gear:
Wheels: Foam
Propeller: 10x5
Spinner: Black plastic
Warranty: Hobbico guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.
SPECS: Wingspan: 58" (1475mm)
Wing Area: 566 sq in (36.5 sq dm)
RTF Weight: 3.2lbs (1450g)
Length: 48" (1220mm)
Airfoil: Flat bottom
Configuration: High wing
Center of Gravity: " ( mm) back from the leading edge of the wing
at the fuselage side
Control Throws:
Versatile and highly maneuverable, the Focke-Wulf Fw 190 was a Luftwaffe favorite from the very first flight. This WWII workhorse was adapted for every role imaginable, including fighter-bomber, interceptor and night fighter. Now, Flyzone presents ready-to-fly RTF and receiver-ready Rx-R versions of this celebrated aircraft with a brushless motor, ESC, servos, AeroCell™ foam construction, operational flaps and retractable landing gear as standard equipment..
Select Scale Focke Wulf FW-190 EP RxR ON INSTOCK 189.99
Hobbico ItCanFly Überlite 2-in-1 Micro EP 2.4GHz RTF INSTOCK $109.99
FEATURES : Snap-n-Fly construction includes a monoplane and biplane foam
airframe with a flight module that holds all the electronics and
powers the airframes
Flight module slides easily onto airframe and magnetically clips into
place, module holds the motor, ESC/RX chip, LiPo battery, carbon
fiber prop and wire wheels
Optional wing airframe (HCAA6395) is fully assembled and ready to
install
3-channel 2.4GHz stick radio
3.7V 65mAh LiPo battery plugs into transmitter's USB port to recharge
Hobbico guarantees this aircraft to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.
INCLUDES: Monoplane and Biplane covered Airframes, 2.4GHz Radio, Flight
Module, 3.7V LiPo Battery, four AA Batteries, Instructions,
Propeller and Wheels
SPECS: Monoplane; Biplane;
Wingspan: 16.1" (410mm) 14" (355mm)
Length: 15.4" (392mm) 15.3" (388mm)
Weight: 0.6oz (17g) 0.7oz (18g)
Thunder Tiger Sukhoi 3D Brushless ARF 33 INSTOCK 99.99
FEATURES : Construction: High-impact EPP foam, pocket design fuselage
Wing: One-piece painted foam
Aileron Control: Single servo
Motor: Ripper 2909/07 outrunner brushless, 920 RPM/V kV rating and
curved magnets for maximum efficiency
Landing Gear: Prebent wire and plastic tail gear
Wheels: Two foam, 1.25" (32mm) diameter
Propeller: 11x8 two blade plastic
Propeller Nut: Aluminum anodized red in color 0.47" (12mm) diameter
Warranty: This kit is guaranteed to be free from defects in material
and workmanship at the date of purchase. It does not cover any
damage caused by use or modification. The warranty does not extend
beyond the product itself and is limited only to the original cost
of the kit.
INCLUDES : Sukhoi 31 3D Airplane with landing gear, wheels, brushless motor,
propeller, prop nut, hardware, foam-safe glue, pinion gear and
instruction manual
REQUIRES: Radio: 4-channel
Servos: Three micro, aileron, elevator, rudder
ESC: 12A BEC, brushless compatible
Battery: 3S LiPo, at least 1100mAh recommended
Battery Charger: For selected battery
Building and field equipment
SPECS: Wingspan: 29.3" (830mm)
Length: 29.8" (845mm)
Wing Area: 322.4 sq in (20.8 sq dm)
Weight: 14 - 15oz (420 - 430g)
Center of Gravity (CG): 2" (53mm) from the leading edge of the wing
at the wing root
Control Throws- Low Rate High Rate
Elevator: 1-3/4" (46mm) 2-1/2" (65mm)
Ailerons: 2" (50mm) 2-3/4" (70mm)
Rudder: 2-1/4" (58mm) 3" (79mm)
Great Planes Yak-55M Sport/Scale Aerobatic EP ARF 50"
FEATURES: Construction: Balsa and ply
Wings: Two-piece with wing joiner and prehinged ailerons
Aileron Control: Dual servo
Cowl: Painted fiberglass attaches to fuselage with magnets
Covering: Top Flite MonoKote
Canopy: Clear, assembles with cabin floor and provides easy access to
radio components
Landing Gear: Two-piece prebent aluminum, 0.08" (2mm) thick
Wheels: Two foam main gear wheels 2" (51mm) diameter
foam 1" (25.4mm) diameter tailwheel
Wheel Pants: Painted fiberglass
Spinner: White plastic, 2.25" (56mm) diameter
Motor Box: Plywood, designed for the Great Planes .32 RimFire
outrunner Brushless motor, if a different motor is installed the
motor box may require modification
Building Time: ready to fly in several hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
date of purchase.
INCLUDES: Prebuilt and covered wing, fuselage and tail assemblies, control
horns, hardware, decals, landing gear, wheels, spinner and
instruction manual
REQUIRES: Radio: 4-ch minimum or 5-ch with mixing (for separate ailerons)
Servos: Four micro
9" (229mm) Extensions: Three for aileron servos and ESC
16" (405mm) Extensions: Two for rudder and aileron servos
Y-Harness: One to connect aileron servos to receiver if not using a
radio with mixing functions
Electronic Speed Control: 45A
Motor: Brushless, RimFire .32 (42-50-800), GPMG4700 recommended
Propeller: APC 12x6E, if using motor listed above
Battery: LiPo, 14.8V 2200mAh 25C, GPMP0521
Battery Charger: LiPo compatible
Building and field equipment
Thunder Tiger Yak 54 3D Brushless ARF 45"
FEATURES: Construction: Laser cut balsa and ply
Wings: Two piece with carbon fiber wing tube
Aileron Control: Dual servo
Motor: Thunder Tiger Brushless outrunner 36/09-30A with 4mm male
connectors
Covering: Adhesive backed, factory applied
Cowl: Painted fiberglass
Canopy: Painted plastic, attaches to fuselage with magnet
Landing Gear: Two-piece carbon fiber
Wheels: Foam, two main 2" (50.5mm) diameter, 0.87" (22mm) tail wheel
Wheel Pants: Painted fiberglass
Warranty: Thunder Tiger guarantees this plane to be free from defects
in both material and workmanship at the date of purchase. The
warranty does not cover any damage caused by use or modification.
This warranty does not extend beyond the product itself and is
limited only to the original cost of the kit.
INCLUDES: Pre-built and covered wings and tail assembly, pushrods, fuselage,
canopy, brushless motor, carbon wing joiner and landing gear, two
main wheels, tailwheel, hardware package, photo-illustrated
instructions
REQUIRES: Radio: 4-channel
Servos: 4 micro
Extensions: Two 12" (305mm) for ailerons
Propeller: 12x5E or 13x4E for normal flight, 12x6E for aerobatics
Y-Harness: For aileron control
Battery: 3S1P LiPo, at least 2200mAh
Battery Charger: LiPo compatible
Building and field equipment
ESC
SPECS: Wingspan: 45" (1143mm)
Length: 45.5" (1160mm)
Wing Area: 382 sq in (24.66 sq dm)
Airfoil: Fully symmetrical
Configuration: Mid wing
Center of Gravity (CG): 3-1/4" (90mm) from the leading edge of the
wing measured at the fuselage side
Control Throws- Low Rate High Rate
Aileron: 1" (25mm) 3" (75mm)
Elevator: 1" (25mm) 1-3/8" (35mm)
Rudder: 1-3/4" (45mm) 3" (75mm)
Great Planes Super Stearman EP ARF 36"
INSTOCK
FEATURES: Construction: Balsa and plywwod
Wings: One piece with "N" struts and cabanes
Cowl: Self aligning, fastens to fuselage with magnets
Covering: Top Flite MonoKote
Landing Gear: Main, one-piece aluminum 0.08" (2mm) thick, prebent
0.08" (2mm) diameter wire
Wheels: Main 2" (51mm) foam, 0.90" (23mm) diameter tailwheel
Wheel Pants: Painted fiberglass
Canopy: Attaches with magnets, includes two painted pilot busts and
windscreens
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase. This warranty does not cover any component
parts damaged by use or modification.
INCLUDES: Super Stearman Biplane with Landing Gear, Wheels, Wheel Pants
two Pilot Busts and Instruction Manual
REQUIRES: Radio: At least 4 channel
Servos: Four micro
ESC: Brushless motor compatible, at least 35A
Motor: 35-30-1250 outrunner brushless
Battery: At least 2200mAh, 11.1V 3S
Battery Charger: LiPo compatible
Propeller: 10x7
Building and field equipment
SPECS: Wingspan: 36" (915mm)
Length: 29.5" (750mm)
Wing Area: 365 in² (23.5 dm²)
Weight: 2.25-2.75lb (1020-1250g)
Wing Loading: 14-17oz/ft² (43-52 g/dm²)
Center of Gravity (CG): 2-5/8" (67mm) back from the leading edge of
the top wing at the fuselage sides
Control Throws; Low Rate High Rate
Elevator, up & down: 1/4" (6mm) 6° 1/2" (13mm) 12°
Rudder, right and left: 7/8" (22mm) 15° 1-1/8" (29mm) 19°
Ailerons, up & down: 1/4" (6mm) 10° 3/8" (10mm) 14°
FEATURES: Construction: Factory finished, all-foam with wing struts, fairings
and tailwheel for added realism
Motor: Brushed type
Radio: Tactic 4-ch TTX402 2.4GHz with recharging port for flight
battery
Battery: 3.7V LiPo 130mAh
Landing Gear: Prebent wire with two 0.71" (18mm) main and 0.39"
(10mm) foam tailwheel
Propeller: Plastic, black in color with black 0.39" (10mm) spinner
Warranty: Hobbico Inc. guarantees this kit to be free from defects in
both material and workmanship at the date of purchase. This
warranty does not cover any component parts damaged by use or
modification.
INCLUDES : RTF Micro Super Cub with Motor, LiPo Battery, Prop, five AA Batteries
and Instruction Manual
SPECS: Wingspan: 17.7" (450mm)
Length: 13.2" (335mm)
Weight: 1.0oz (29g)
Hobbico FlyZone Micro Super Cub EP 2.4GHz RTF 17.7" INSTOCK $79.99
Great Planes F-86 Sabre Micro EDF Tx-R ON ORDER 139.99
New Product Introduction!
15” wingspan!
A micro-size EDF jet that you can fly with your transmitter!
The F-86 Sabre is a unique and remarkable product! Not only is it the first true micro EDF available, it
also features revolutionary Transmitter-Ready (Tx-R) technology. Pilots can fly this sleek jet using their
favorite transmitter. They simply add the AnyLink radio adapter. The F-86 comes with everything else
needed. See the next page for a special AnyLink offer.
It has a wingspan of just 15”, but the F-86 Sabre boasts scale looks of a plane twice its size. It also offers
awesome performance to match its scale appearance. From the micro receiver and stand-alone ESC to
the three digital ultra-micro servos, every component is high quality. The brushless motor, ducted fan unit
and LiPo flight pack deliver impressive power for true jet-like performance, including fast, low-level flybys
and sport aerobatics high in the sky.
Features
· Fully assembled, with a factory-finished foam fuselage and wings
· Canopy attaches magnetically for easy access when changing batteries
· Landing gear can be installed for ROG takeoffs and removed for hand launches and grass
landings
· Molded-in panel lines, hatch lines, and machine gun ports for realistic looks
· Ducting runs the entire length of the fuselage, providing a channel for the HyperFlow ducted fan
and enhances scale realism
Specifications
Wingspan: 15 in (381 mm) Weight: 2.35 oz (67 g)
Wing Area: 53.1 sq in (3.4 sq dm) Length: 14.4 in (366 mm)
Wing Loading: 6.4 oz/sq ft (20 g/sq dm)
I ncludes
· 11,500kV brushless inrunner motor
· 30 mm HyperFlow™ ducted fan unit
· 6A brushless ESC
· 4-channel 2.4GHz SLT™ micro receiver
· 3 digital ultra-micro servos
· 200mAh 7.4V 15C LiPo flight battery
· Balancing DC LiPo battery charger
· Pilot figure
Requires: AnyLink and compatible 4-channel transmitter (see next page for free AnyLink offer)
Available: Late January
AnyLink means convenience and flexibility –
and it’s FREE with the F-86 Sabre through April 30!
AnyLink gives pilots the power to fly any and all Tx-R aircraft using the
same transmitter. This tiny electronic converter enables your transmitter
to send secure signals to the SLT 2.4GHz receiver, which is preinstalled
in every Tx-R model. AnyLink was designed to be compatible with radios
used most widely by today’s R/C pilot, including Futaba®, Hitec®, JR® and
Spektrum®.
Certain radios may require an adapter cable, which is not included with
AnyLink but can be purchased separately. To confirm that AnyLink will
work with a specific radio or requires a cable, please see the compatibility
chart on www.tx-ready.com.
Watch for more Tx-R planes coming soon!
Call Toll-Free: 1-800-637-7660 www.GPDealer.com
Tx-R and AnyLink Program
The following items are currently available only through the Tx-R/AnyLink program, code 35P.
Please contact your sales representative for details.
GPMA1771 Micro F-86 Sabre EDF Tx-R
AnyLink Adapter: Free with the the F-86 Tx-R through April 30!
TACJ2000 AnyLink 2.4GHz Universal Radio Adapter
AnyLink cables are required for some radios. See tx-ready.com for more information.
TACM0001 AnyLink Cable Futaba Square $2.49
TACM0002 AnyLink Cable JR/Spektrum $2.49
TACM0003 AnyLink Cable Futaba/Hitec Round $2.99
TACM0004 AnyLink Cable Hitec Aurora $2.99
TACM0005 AnyLink Power Adapter Spektrum TBD
DX4e/DX5e/DX7s/DX8/DX10t
TACM0006 AnyLink Cable Futaba 12Z/14MZ $3.99
FEATURES: Converts signals from Futaba, Hitec, JR and Spektrum brand radios
and transmits signal to control Tactic brand 2.4GHz SLT receivers
Compatible with transmitters originally designed for 72MHz, 2.4GHz,
FM and PCM operation
Includes adapter cable for Futaba transmitters with square trainer
jack and JR/Spektrum DX6, DX6i and DX7 transmitters-
cables for other transmitters are available separately
Expands the ability to use a huge range of transmitters to fly a
huge range of aircraft with interference-free, secure 2.4GHz SLT
frequency hopping technology
LED with audible tones for easy setup and use
Matchbox size, and weighs less than an ounce for easy mounting to a
transmitter
INCLUDES : Tactic AnyLink SLT 2.4GHz Radio Adapter with Futaba Square and
JR, Spektrum Cables
SPECS : Compatible Transmitters: Futaba, Hitec, JR and Spektrum
Compatible Receivers: Tactic brand 2.4GHz flight receivers
Frequencies: 2.403-2.480GHz
Modulation: FHSS spread spectrum
Input Power: Received from host transmitter
Input Connection: Universal servo connector
Power On Indicator: LED
Inactivity Alarm: Tones sound after 4 minutes of TX inactivity
Output Power: <0.1W
Antenna: External, rotatable and foldable
Case Dimensions: 2.5 x 1.4 x 0.5" (64 x 36 x 12mm)
Weight: 0.85oz (24g)
Mounting Method: Hard locking fastening strips
Tactic AnyLink 2.4GHz Universal Radio Adapter on order $24.99
