Designed for sport electric cars and boats with NiCd or NiMH batteries. 
Great for 750mAh “AAA” cells, nitro receiver packs and the highest capacity sub-C size cells. 
With 1.5A, 3A and 5A charge settings. 
Built-in jack for charging 4-5 cell nitro receiver packs. 
Five ramping LEDs show charge status
POWER SUPPLIES
CLICK HERE
Onyx 200 AC/DC Sport Peak Charger w/LEDs 
DTXP 4200 $42.99 INSTOCK
Onyx 220 AC/DC Programmable Peak Charger w/LCD. DTXP4220 ,$61.99 INSTOCK
FEATURES: Charges 4-8 cell NiCd or NiMH 4.8 - 9.6V cells with a capacity range
            of 50 - 9900mAh
          Pushbutton controls and audible tones for easy setup and control
          Five battery memories are included for quick changes between battery
            types
          Fully adjustable charge currents and NiCd and NiMH flexibility for a
            wide range of applications
          Precise peak detection with automatic TRICKLE charge fills packs
            completely for optimum voltage and run time, 3 - 20mV adjustable
            peak detection helps to customize charger-to-battery performance
          Built-in jack included for charging 4 or 5 cell NiCd or NiMH
            receiver batteries for nitro models, even 8-cell transmitter
            packs
          Custom reversed LCD with backlight for easy viewing in any condition
            shows input and output voltges, peak voltage, charge current,
            charge capacity and time and more
          Small, lightweight switching AC power supply delivers up to 5 amps
            of charge current
          Solid state reverse polarity and current overload safety devices
          FIVE YEAR warranty

DuraTrax Onyx 210 AC/DC Peak Charger w/LCD $ 52.99 INSTOCK DTXP 4210
FEATURES: Charges 4-8 cell NiCd or NiMH (4.8 - 9.6V) cells with a capacity
            range of 750-7500mAh
          NiCd and NiMH compatibility with custom peak detection
          Pushbutton controls, audible tones and a custom LED with backlight
            for easy setup and use
          Selectable charge currents of 800mA, 1.5A, 3A and 5A
          Automatic TRICKLE charge fills pack completely after peak charge for
            optimum battery performance
          Precise peak detection algorithm with automatic TRICKLE charge fills
            packs completely for optimum voltage and run time
          Built-in jack included for charging 4 or 5 cell NiCd or NiMH
            receiver batteries for nitro models and even transmitter batteries
          LCD shows battery voltage, charge current, time, capacity, battery
            type and more
          Small, lightweight switching AC power supply delivers up to 5 amps
            of charge current
          Solid state reverse polarity and current overload safety devices
          FIVE YEAR warranty

Great Planes Electrifly Triton2 DC Computer Charger 
FEATURES: Great for many applications including Airplane and Heli Batteries,
               Tx and Rx batteries, Field Batteries and more
          Handles 1-24 cell NiCd/MH (1.2 - 28V)
                  1-5 cell Li-Ion or LiPo (3.6 or 3.7V cells)
                  6, 12, 24V Pb cell (2V per cell)
          Precision Zero DeltaV Peak Detection with adjustable sensitivity
            for NiCd and NiMH batteries
          "Constant Current / Constant Voltage" charge method for Pb and
          Li-Ion/LiPo batteries
          Fast Charge Thermal Cutoff (GPMM3151 Thermal Probe available
          separately)
          Top-Off Charge feature fully charges NiMHs without overheating
          0-250mA adjustable TRICKLE Charge current (NiCd and NiMH only)
          .1-3A Adjustable Discharge Current
          Adjustable Discharge Cutoff Voltages for NiCd/MH, pre-set voltages
            for Pb and LiPo/Ion
          Perform 1 to 10 cycles (NiCd/MH only)
          Recall data for 10 full cycles
          Configure up to 10 batteries in memory for instant, easy recall and
            charger setup
          Displays Input and Output Volts, Peak Volts, Avg Dsch Volts, Chg and
            Dsch Capacity, Currents and Time, Error Messages (No Battery
            Connected, Open Circuit, and Reverse Polarity)
          Audible sound cues aid in programming and notification of function
            changes
          Warning messages for Improper Input Voltage, Poor Connections,
            Unsuitable Battery Condition, Reverse Polarity on output
          Safety features include Cool-Off Time Delay, Maximum NiMH Charge
            Input, Fast Charge Safety Timer, Current Overload and Reverse
            Polarity Protection
          Built-in cooling fan for better charge efficiency and extended
            charger life
          Small and lightweight, with a super-sturdy aluminum case for rugged
            durability
          Full 1 year warranty

$ 104.99 IN STOCK GPMM 3153 SALE  WAS 129.99 
Hobbico Quick Field DC Charger MkII 12 Volt 
FEATURES: Super Easy to use, and comes with many safety features.
          Simple push button start-up.
          Peak Detection Charging for NiCd or NiMH packs.
          Visual and audible error messages to indicate reverse polarity and
            poor output connections.
          Time-out Charge Termination and fused current overload protection.
          Can be mounted on a Field Box, or used as a stand-alone unit.
          Charges 1 to 3 cell Li-Ion or LiPo (Lithium Polymer) Park Flyer
            batteries using "Constant Current/Constant Voltage" method
          Charges 1-8 cell NiCd or NiMH radio batteries.

INSTOCK $ 54.99
Great Planes ElectriFly Triton EQ AC/DC Charger 
                                        INSTOCK 99.99 / GPMM 3155
                              
              This is the ElectriFly AC/DC TritonEQ
          Charger, Discharger and Cycler with Built-In Equalizer.

      ***Upgraded features over the ElectriFly Triton Jr. include;***
  Lightweight built-in switching AC power supply, plus DC input capabilities
   New reversed character LCD with backlight and 0-45° adjustable view angle
         Built-in balancing for 1-6S LiPo, Li-Ion or LiFe (A123) cells
                  with FlightPower and ElectriFly adapters

FEATURES: Charges 1-14 cell NiMH and NiCd cells and 1-6 cell LiPo, Li-Ion and
            LiFe (3.6, 3.7 or 3.3V cells)
          Peak detection technology for NiCd and NiMH batteries, and constant
            current/constant voltage technology for lithiums and lead-acid
            batteries
          Ideal for radio batteries and with charge currents adjustable from
            100mA to 5 amps (limited to 1C for lithiums) it can also handle
            large power packs
          Built-in balancing for up to 6S packs makes it ideal for the smallest
            indoor fliers up to big outdoor powerhouses with no need for
            external balancer
          Discharge cutoff voltage can be adjusted for NiCd/MH, and is fixed
            for lithiums and lead-acid batteries
          NiCd and NiMH trickle current is automatically set at 1/20th of
            the fast charge current setting
          Reversed LCD with backlight plus a 0-45° adjustable view angle
            clearly displays input and output volts, peak volts, individual
            lithium cell voltages, average discharge volts, charge and
            discharge capacity, currents and time, error messages and more
          Touchpad controls and super-simple programming make for
            simplicity and reliability
          Safety features include fast charge safety timer, current overload
            and reverse polarity protection
          One year limited warranty

INCLUDES: ElectriFly AC/DC TritonEQ with with FlightPower and ElectriFly
            adapters, AC power cord, DC power cord with alligator clips and
            instruction manual

SPECS:    AC Input Voltage: 110V 60Hz - 240V 50Hz (detachable AC cord)
          DC Input: 11-15.0V DC, with large alligator clips
          Number of Outputs: One, banana jacks
          Battery Types, # cells:  1-14 NiCd, NiMH
                          1-6 LiPo, Li-Ion, or LiFe (3.6, 3.7 or 3.3V cells)
                          2, 4, 6, 8, 10, 12V Pb (2V per cell)
          Fast Charge Current: 0.1-5.0A (1C maximum for lithiums)
                               63W max DC, 50W max AC
          Fast Charge Termination: Peak detection NiCd, NiMH, cc/cv for Pb and
            lithiums
          Trickle Current (NiCd/MH only): Chg current / 20
          Peak Sensitivity (NiCd/MH only): 8mV NiCd, 5mV NiMH
          Peak Delay at Start (NiCd/MH only): 3 minutes
          Fast Charge Safety Timer: NiCd/MH 1.5 hours, lithiums 3 hours, or
            turn off
          Lithium Balancing Accuracy: 5mV per cell
          Lithium Balancing Connector: FlightPower and ElectriFly adapters
            included
          Lithium Max. Node Current: 300mA
          Discharge Current: 0.1-1.0A (5W max)
          Discharge Cutoff Voltage: NiCd, NiMH 0.1-16.8V
                                    LiPo, Li-Ion 3.0V per cell
                                    LiFe 2.5V per cell
                                    Pb 1.8V per cell
          Cycle Count (NiCd, NiMH only): 1-5 cycles
          Battery Memories: One
          Programming Controls: Membrane touchpad, 4 buttons
          Display Type: 2x16 reversed LCD w/backlight and adjustable angle
          Audible Indicators: Beeper
          Case Material: Aluminum and ABS plastic
          Safety Devices: Solid-state reverse polarity and overload
          Case Size: 5.9 x 6.0 x 2.3 in (150 x 153 x 58mm)
          Weight: 23.8oz (675g, w/o AC power cord)

                                                             
DuraTrax Onyx 100 AC/DC Peak Charger NiCd NiMH
              instock $24.99  DTXP4191 
FEATURES: Ideal for sport electric car or boat modelers needing a charger that
            operates on either AC or DC input power and automatically peaks
            both NiCd and NiMH batteries as small as 600mAh "AAA" and as big as
            sub-C size-good for 1/18-1/8 scale models
          Lightweight switching AC power supply is great for portability and
            small pit areas
          Selectable charge currents of 1A, 2A (2A limit on AC) or 4A linear
          Peak detection intelligence eliminates need to track charge state of
            battery before charge
          Automatic trickle charge tops off packs to maximum power
          Auto-start function with status LED makes setup and use a snap
          Built-in socket for connecting radio batteries
          DC power lead with alligator clips connects to many 12V DC power
            sources
          Five year warranty

SPECS:    AC Input: 110V AC 60Hz
          DC Input: 11-15V DC, built-in lead with alligator clips
          Battery Types: 4-8 NiCd or NiMH Cells (4.8-9.6V, limited to 7 cells
            on DC)
          Battery Capacity Range: 600-6000mAh
          Fast Charge Current: 1, 2, or 4A linear (2A limit on AC)
          Fast Charge Termination: Peak detection
          Fast Charge Safety Timer: 90 minutes
          Peak Sensitivity: 8mV
          Auto-Trickle Current: 1/20 fast charge setting
          Controls: auto-start, switchable current selector
          LED Indicator: Red
          Output Connections: Built-in lead with standard connector
                              Built-in jack for radio batteries
          Protective Devices: Solid-state reverse polarity and current overload
          Case size: 4.1 x 3.5 x 1.1" (104 x 90 x 29mm)
          Weight: 9.17 oz.(260g)
.
THE SQUID CHARGING CORD 
RACES EDGE 14.99 INSTOCK
      This is the DuraTrax Onyx 235 AC/DC Advanced Charger               
                        with Built-In Balancer.                                
               Combines the proven features of the Onyx 230                    
                with balancing and other asked for extras.                     
                                                                               
                Also charges LiPo, Li-Ion, and LiFe packs.                     
                                                                               
    **Additional Technical Info Will Be Added When It Becomes Available.**     
                                                                               
FEATURES: Charges 1-10 cell NiCd or NiMH (1.2 - 12V) cells and 1-4 cell LiPo   
            Li-Ion or LiFe (3.7 - 14.8V) cells                                 
          Balancing jack for up to 4 lithium cells                             
          Universal jack for charging radio batteries                          
          Detachable AC and DC input power cords                               
          USB jack for charging music players, cell phones and other           
            accessories                                                        
          Mini USB jack for downloading firmware                               
          Custom CC/CV charge algorithm carfully charges Lithium Polymer,      
            Lithium-Ion or Lithium Ferrite-Phosphate (A123) batteries          
            fully and safely                                                   
          Pushbutton controls and audible tones for easy setup and control     
          Precise peak detection with automatic TRICKLE charge fills packs     
            completely for optimum voltage and run time, 3 - 20mV adjustable   
            peak detection helps to customize charger-to-battery performance   
          Built-in banana jacks allow connection with many common charge       
            adapters, an adapter with Kyosho type plug is included             
          Built-in fan for long lasting performance                            
          Custom reversed LCD with backlight for easy viewing in any condition 
            shows input and output voltges, peak voltage, charge current,      
            charge capacity and time and more                                  
          Small lightweight switching AC power supply delivers up to 5 amps    
            of charge current                                                  
          Solid state reverse polarity and current overload safety devices     
          FIVE YEAR warranty through Hobby Services beginning at date of       
            purchase                                                           
                                                                               
INCLUDES: DuraTrax Onyx 235 AC/DC Advanced Charger with Built-in Balancer and  
            output adapters for Deans Ultra Plug, Traxxas and standard         
            connectors, lithium balance adapters for ElectriFly and            
            FlightPower/Thunder Power                                          
                                                                               
REQUIRES:                                                                      
                                                                               
SPECS:    AC Input: 110V AC 60Hz - 240V 50Hz, detachable cord, 50W             
          DC Input: 11-15V detachable cord with alligator clips                
          Battery Types: 1-10 NiCd or NiMH cells (1.2-12V)                     
                         1-4 cell LiPo, LiIon or LiFe (3.7-14.8V)              
          Fast Charge Current: 0.1 - 8.0A linear (4C limit for Lithiums, 5A    
            limit with AC input                                                
          Fast Charge Termination: Peak detection for NiCd/MH, CC/CV for       
            Lithium                                                            
          Fast Charge Safety Timer: OFF-300 minutes                            
          NiCd/NiMH Peak Sensitivity: 3 - 20mV adjustable                      
          NiCd/NiMH Auto Trickle Current: Auto (1/20 fast charge settings) or  
            manual(0 - 250mA)                                                  
          Battery Memories: 10                                                 
          Protective Devices: Solid-state reverse polarity and current overload
          Case size: 6.3 x 5.3 x 1.7" (160 x 134 x 43mm)                       
          Weight: 19.7oz (559g) with DC cord attached                          
                                                                               
                                                               

ON ORDER PRICE 89.99,  DTXP4235, 
LiPo, LiFe, NiCd and NiMH – the Onyx 245 charges them all and has built-in balancing for lithium packs that maximizes their safety, longevity and performance. Plus it’s two chargers in one! Identical twin outputs make the Onyx 245 an excellent choice for models that use two battery packs, and for modelers who rotate through multiple batteries at home or at the track. 

AC/DC flexibility, simple menus and controls, advanced LCDs with backlight, and compact size make it easy for anyone to use anytime, anywhere. With its power and versatility, the Onyx 245 gives racers yet another advantage on race day!

Features: 
Two independent outputs – each with built-in balancing for up to 3S lithium batteries 
Both outputs are compatible with LiPo, LiFe, NiMH and NiCd batteries, and the Onyx 245 can charge two batteries of different chemistries simultaneously 
Each output includes a built-in jack for charging 4-5 cell receiver packs and even transmitter packs 
Includes Deans® Ultra Plug®, Traxxas®, and standard connector adapters for each output 
Includes ElectriFly® and FlightPower®/Thunder Powerâ„¢ 6S balance boards 
 

General Specifications:
AC Input: 110V AC 60Hz switching supply with U.S. plug 
DC Input:Â 11-15V DC, built-in lead with alligator clips
Protective Devices:Â Solid-state reverse polarity and current overload 
Dimensions:Â 7.95 x 6.1 x 1.77 in (202 x 156 x 45 mm)
Weight:Â 28.2 oz (801 g)

Specifications for each output:
Battery Types:Â 4-8 NiCd or NiMH (4.8-9.6V); 1-3 LiPo or LiFe (3.7-11.1V)
Battery Capacity: 100-7500mAh
Fast Charge Current:Â 0.8A, 1.5A, 3A, 5A linear (80W total, 40W each output)
Fast Charge Termination:Â Peak detection for NiCd and NiMH; cc/cv for lithiums
Fast Charge Safety Timer:Â 90 minutes
NiCd/NiMH Peak Sensitivity:Â 8mV for NiCd; 5mV for NiMH
NiCd/NiMH Auto-Trickle Current: Auto (50, 100, 150, 250mA)




Onyx 245 AC/DC Dual Charger with Balancing  $119.99 /DTXP4245
FEATURES: Charges 1-3 LiPo cells only
          Compact switching power supply and AC/DC power cords
          Switch selectable charge rates for 1-3S LiPo power and radio packs
          Sound cues for easy setup and tri-color LED constantly shows charge
            status
          Deans Ultra Plug male connector, Traxxas adapter, and universal
            radio jack for 1-3S LiPo receiver packs
          Ninety minute safety timer
          Built-in cooling fan
          Reverse polarity and current overload circuitry
          FIVE YEAR warranty through Hobby Services (U.S.A. and Canada only)
            beginning at date of purchase

INCLUDES: Duratrax Onyx 150 AC/DC LiPo Charger with Duratrax 3S Balancing Plug
            with 2S Adapter, Traxxas Battery Adapter, and Instruction Manual

SPECS:    AC Input: 110V 60Hz, 50W
          DC Input: 11-15V, 50W
          Battery Type: 1-3 LiPo cells only (3.7-11.1V)
          Battery Capacity Range: 100-7500mAh
          Fast Charge Current: 1.5A, 3.0A, and 5.0A
          Fast Charge Termination: cc/cv (based on 3.7V cell)
          Fast Charge Safety Timer: 90 minutes
          Output Connections: Attached lead with Deans Ultra Plug male
            connector, Traxxas adapter and universal radio jack (for 1-3S LiPo
            receiver packs)
          Input Connections: Attached AC lead and detachable DC lead with
            alligator clips
          Balancing Connector: Duratrax 3S with 2S adapter
          Balancing Accuracy: +/-5mV per cell
          Protective Devices: 90 minute safety timer, built-in cooling fan,
            reverse polarity, and current overload circuitry
          Dimensions: 5.3 x 5.0 x 1.9" (133 x 127 x 48mm)
          Weight: 12.6oz (356g)
.
Duratrax Onyx 150 AC/DC LiPo Balancing Charger instock 54.99 DTXP4195
Hitec X4 Plus AC/DC Charger DISC
FEATURES: Charges 1-6 cell LiPo, LiFe and Li-ION, 1-15 cell NiCd and NiMH
            and 2-20V lead acid batteries
          Fast Charge, Balance Charge and Storage Charge modes for lithium
            batteries
          Automatically controls current rate during charging and discharging
            process
          Four independent 50-watt power outputs charges up to four batteries
            at once
          Four independent balancing ports for lithium batteries
          Five user customizable presets per output
          Twin fan cooling system with internal sensor for controlling fan
            speed
          Batteries can be set to automatically Charge/Discharge or Discharge/
            Charge up to a maximum of 5 cycles
          Automatic charge termination* if battery temperature gets too high
            *Temperature probe (HRCP4159) is required and must be purchased
            separately
          PC-based program can analyze the characteristics of each battery via
            a USB port*, graph of voltage, current and capacity curves with
            individual voltage of each cell in a lithium pack can be displayed
            on a PC- *PC-LINK USB adaptor is required and must be purchased
            separately, HRCP4168


INCLUDES: Hitec X4 Plus AC/DC Powered Multi Charger with AC and DC Input Cables
            Battery Clamps, Tamiya Charge Connector, RX Battery Charge
            Connector, TP/FP, HP/PQ, and XH type LiPo Balancer Boards two Bare
            Wire Connectors, Alligator Clip Charging Connector and Manual


SPECS:    Input Voltage: AC, 100-120V (330-380W)
                         DC, 11-18V (minimum 20A)
          Charging Current: 0.1-6.0A (max 50W x 4, total 200W)
          Discharging Current: 0.1-1.0A (max 5W x4, total 20W)
          Dimensions: 8.8 x 6.7 x 2.6" (225 x 170 x 66mm)
          Weight: 3.5lbs (1.57kg)


Hitec X1-200 Touch Battery Charger
INSTOCK 109.99, SALE
FEATURES: Charges 1-6 cell LiPo, 1-6 cell LiFe, 1-6 cell Li-Ion, 1-15 cell
            NiMH, and 2-20V Pb (lead acid) cells
          3.2" LCD touch screen
          Individual LiPo cell voltage balancer with universal balancing
            board compatible with most LiPo batteries
          Fast and storage mode for lithium charging
          Cyclic charging and discharging for NiMH and NiCd cells may be set to
            repeat 1-5 times
          Delta peak sensitivity for NiMH and NiCd cells
          Temperature threshold shutdown for NiCd and NiMH cells (requires
            Temperature Sensor, HRCP4159-not included)
          Operates on a 12V automotive battery or 11-18V DC power supply
          Automatic current adjustment during charging and discharging
          One year limited warranty through Hitec beginning at date of purchase


INCLUDES: X1-200 Touch Charger, DC Power Cord with Alligator Clips, 2 Pin
            T-Type Charging Cable, Balancing Board Cable, Universal Balancing
            Board, and Instruction Manual


SPECS:    Input Voltage Range: DC 11-18V DC
          Required Input Amperage: 12 Amps
          Max Charge Power: 200 Watts
          Charge Current Range: 0.1-12 Amps
          Discharge Circuit Power: 40 Watts
          Discharge Current Range: 0.1-5.0 Amps
          Balancing Port Current Drain: 200mA per cell
          NiCd, NiMH Cell Count: 1-15 cells
          LiPo, LiFe & Li-Ion Cell Count: 1-6 cells
          Lead Acid (Pb) Voltage: 2-20 Volts
          Weight: 1.25 lbs (35.4g)
          Dimensions: 5.5 x 6.5 x 2.4" (140 x 165 x 61mm)


44254 X4 Pro AC/DC Charger
INSTOCK 199.99 
 

 
 
X4 AC Pro - AC/DC Four Port Multicharger  
Building on the popularity of our X4 AC Plus, we decided to take it up a notch with the introduction of our X4 AC Pro high-performance, microprocessor-controlled charger/discharger with extensive battery management capabilities. Capable of operating on 100 - 240 volts AC household current or from an 11 - 18 volts DC power source, this new multi-faceted powerhouse exudes a total charge circuit power of 200 watts with Power Distribution capability in AC mode and a 300-watt output when in DC mode. The X4 AC Pro allows you to connect up to four batteries of varying chemistries (NiMH/NiCd/LiPo/LiFe/Lilon/LiHV/Pb) to any of the charging channels with each channel performing independently of one another. Additional features include our “Charge Master” software, providing the unprecedented ability to operate your charger via your personal computer plus a built-in Bluetooth for Smartphone app operation. Experience the future
Double click here to add text. DuraTrax Onyx 245 AC/DC Dual Charger with LiPo Balancing  
  and two Duratrax Onyx 11.1V LiPo Batteries with XT90 Connectors.  

  Ideal power setup for 1/8 scale monster trucks requiring  
  two 11.1V LiPo batteries with XT90 connectors  

******When charging 2-3 cell LiPo batteries, the Main Charge Lead AND**********
*****the Balance MUST be connected in order for the charger to operate.********

FEATURES: DuraTrax Onyx 245 AC/DC Dual Charger;  
  Charges 1-3 cell LiPo and LiFe (3.7-11.1V) and 4-8 cell NiCd and  
  NiMH batteries  
  Both outputs are compatible with LiPo, LiFe, NiMH and NiCd  
  batteries and the Onyx 245 can charge two batteries of the same or 
  different chemistries simultaneously  
  Each output includes a jack for charging transmitter packs and 4-5  
  cell receiver packs  
  Advanced LCD display with backlight  
  FIVE YEAR warranty through Hobby Services (U.S.A and Canada only)  
  beginning at date of purchase  

  Duratrax Onyx 11.1V 5400mAh 50C LiPo Battery;  
  Soft case  
  10AWG wire lead, 3.9" (100mm) long  
  50C continuous discharge rating  
  ElectriFly balancing connector  

INCLUDES: DuraTrax Onyx 245 AC/DC Dual Charger (DTXP4245) w/Star Plug,  
  and Standard Connector Adapters for each output, ElectriFly and  
  FlightPower/Thunder Power 6S Balance Boards and Instructions  
  Two Charge Leads Banana to XT90 Battery Connector, DTXC2224  
  Two Duratrax Onyx 11.1V LiPo Batteries with XT90 Connectors  
  (DTXC2004)  

REQUIRES: LiPo Charging Bag  

SPECS: General Charger Specifications;  
  AC Input: 110V AC 60Hz switching supply with U.S. plug  
  DC Input: 11-15V DC, built-in lead with alligator clips  
  Protective Devices: Solid-state reverse polarity and current  
  overload  
  Dimensions: 7.95 x 6.1 x 1.77" (202 x 156 x 45mm)  
  Weight: 28.2oz (801g)  

  Specifications for Each Output;  
  Battery Types: 4-8 cell NiMH or NiCd, 1-3 cell LiPo or LiFe  
  (3.7-11.1V) packs  
  Battery Capacity: 100-7500mAh  
  Fast Charge Current: 0.8A, 1.5A, 3A, 5A linear (80W total, 40W each
  output)  
  Fast Charge Termination: Peak detection for NiCd and NiMH,  
  cc/cv for lithiums  
  Fast Charge Safety Timer: 90 minutes  
  NiCd/NiMH Peak Sensitivity: 8mV for NiCd; 5mV for NiMH  
  NiCd/NiMH Auto-Trickle Current: Auto (50, 100, 150, 250mA)  
Onyx 245 & Batt Combo 6S Power Pack INSTOCK 199.99
Buy this
LiFeSource AC/DC Balance Charger 2S 3S, HCAMM6375, 34.99 INSTOCK 
   
FEATURES: Charges the entire line of Hobbico LiFeSource Lithium-Iron Phosphate 
  (LiFe) batteries  
  Uses the cc/cv (Constant Current/Constant Voltage) charge method  
  with voltages customized for LiFe batteries  
  Selectable charge currents for use with various size batteries  
  Setting up and usage is easy with an auto-start function with status 
  LED and audible tones  
  Built-in socket for connecting batteries with Futaba J or universal  
  receiver connectors  
  110V AC or 12V DC inputs with alligator clips for home or field use  
  Built-in 3S balancing connector with 2S adapter included-balancing  
  ensures all cells are charged to optimum voltage every time  
  Solid state reverse polarity and current overload protection  
  Five year limited warranty through Hobby Services beginning at date  
  of purchase  
   
INCLUDES: Hobbico LiFeSource AC/DC Balancing Battery Charger with AC and DC  
  Power Leads, JST XH 3S Balancing Connector, Star Plug Battery  
  Connector and Instructions  
   
REQUIRES: Connecting to power source and battery  
   
SPECS: AC Input: 110V AC 60Hz, U.S. type AC connector (18W max.)  
  DC Input: 11-15V DC, built-in lead with alligator clips (40W max.)  
  Battery Types: 1-3S LiFe Packs (3.3-9.9V)  
  Battery Capacity Range: Up to 5000mAh  
  Fast Charge Current: 0.5, 2.5, 4.0A (15W 2.5A limit on AC)  
  Fast Charge Termination: cc/cv, based on nominal voltage 3.3V per  
  cell  
  Fast Charge Safety Timer: 90 minutes  
  Controls: Auto-start, switchable current selector  
  LED Indicator: Red  
  Audible Indicator: Charge completion  
  Output Connections: Built-in lead with Star Plug male connector  
  built-in Rx connection  
  Lithium Balancing Connector: JST XH 3S balancing connector with 2S  
  adapter  
  Lithium Balancing Accuracy: 8mV per cell  
  Lithium Max. Node Current: 100mA  
  Protective Devices: Solid-state reverse polarity, current overload  
  Case size: 4.1 x 3.5 x 1.1" (104 x 90 x 29mm)  
  Weight: 9.17 oz. (260g)  
Onyx 240 AC/DC Dual Charger w/LCD,DTXP 4240  INSTOCK 89.99
  This is the DuraTrax Onyx 240 AC/DC Dual Charger with Backlit LCDs.  
  Excellent for electric powered models that use two NiCd or NiMH  
  simultaneously or modelers who rotate through multiple  
  batteries at the field or track.  
   
  **Attention International Customers-**  
  **The AC input voltage of this charger is 110V.**  
  **240 refers only to the model number.**  
   
FEATURES: Charges 4-8 cell NiCd or NiMH (4.8 - 9.6V) cells  
  Two independent outputs each with identical features and functions  
  Selectable charge currents of 800mA, 1.5A, 3A and 5A with auto-  
  TRICKLE-each output  
  NiCd and NiMH compatibility with custom peak detections-each output  
  Unique built-in jack for charging 4 - 5 cell receiver packs for nitro
  models, even Tx packs-each output  
  Custom LCD with Blue backlight shows battery voltage, charge current 
  time and capacity-one for each output  
  Simple pushbutton controls and audible tones aid in setup and use-  
  each output  
  DC power lead with alligator clips easily connects to many 12V DC  
  power sources  
  Solid state reverse polarity and current overload protection ensure  
  trouble-free operation  
  FIVE YEAR warranty (U.S.A. and Canada only)  
   
INCLUDES: DuraTrax Onyx 240 AC/DC Dual Charger with two output leads with  
  standard connectors, AC cord, DC cord with alligator clips and  
  instruction manual  
   
SPECS: AC Input: 110V AC 60Hz  
  DC Input: 11-15V DC, built-in lead with alligator clips  
  Battery Capacity Range: 750-7500mAh  
  Fast Charge Current: 0.8A, 1.5A, 3A, 5A linear (40W)  
  Fast Charge Termination: Peak detection  
  Fast Charge Safety Timer: 90 minutes  
  Peak Sensitivity: 8mV for NiCd, 4mV for NiMH  
  Auto TRICKLE Current: 1/20 fast charge setting, rounded to 50mA  
  (0-250mA)  
  Controls: 3-pushbuttons  
  Display Type: 7 segment custom LCD with blue backlight  
  *Output Connections: Two built-in leads with standard connectors  
  Built-in jack for 4-5 cell Rx packs or Tx packs  
  *Adapter-Standard to Deans Ultra Male (available separately)  
  (GPMM3131)  
  *Adapter- Standard to Vendetta, MiniQuake, RS4 Battery available  
  separately (DTXC2210)  
  Protective Devices: Solid-state reverse polarity and current overload
  Case size: 7.95 x 6 x 1.97" (202 x 153 x 50mm)  
  Weight: 27.8oz (789g)  
   
Li-24 30W 2S-4S AC Balance Charger w/Star Conn
DTXP 4630 24.99, ON ORDER 

TECH NOTES

  This is the AC Powered Duratrax Li-24 2-4S LiPo/LiFe Balance Charger  
  with Star Connector.  
   
FEATURES: Ideal entry-level charger for modelers using up to 4S LiPo batteries 
  CC/CV charge method with voltages customized for LiPo/LiFe batteries 
  1A, 2A, 3A selectable charge current  
  Star plug is compatible with the R/C industry's most commonly used  
  polarized power plug, tapered shape and grip strips for fast and  
  easy connection and separation  
  Built-in balancing function ensures all cells are charged to  
  maximum voltage  
  One year limited warranty through Hobby Services beginning at date of
  purchase (U.S.A. and Canada only)  
   
INCLUDES: Balance Charger, 18AWG Charging Cable with 4mm Banana Plugs and  
  Star Connector, AC Power Cord and Instructions  
   
SPECS: AC Input: 100-240V AC, 60Hz, U.S. plug  
  Output Power: 30W  
  Battery Type: LiPo/LiFe  
  Cells: 2-4  
  Fast Charge Start: Auto start at hook up  
  Fast Charge Current: 1A, 2A, 3A*  
  *Note, maximum charge current for a 4S pack will be 1.4A.  
  Maximum Charge Current: 3A  
  Balance Current: 200mA  
  Controls: Auto-start, switchable current selector  
  Output Connectors: 4mm banana sockets  
  Display Type: 4 red cell LEDs, 1 multi-colored status LED  
  Balancing Connector: Electrifly 2-4S  
  Dimensions: 4.4 x 2.7 x 1.6" (111 x 69 x 41mm)  
  Weight: 6.2oz (176g)  
0683 2-4 Cell AC/DC LiPo Battery Balance Charger
ON ORDER 49.99 VEN0683

TECH NOTES

  This is the Venom AC/DC Powered 2-4S LiPo Balance Charger.  
   
FEATURES: Charges 2-4S LiPo of LiFE battery packs  
  Simultaneously charges two 2S packs, or a single 3S or single 4S  
  LiPO or LiFE pack  
  Automatically identifies cell count and adjusts charging amperage  
  May also be used as a voltage checker by manually setting the  
  charge current to zero  
  LCD display  
  30 day limited warranty through Venom beginning at date of purchase  
   
INCLUDES: AC/DC Powered 2-4S LiPo Balance Charger, DC Cable with Alligator  
  Clips, 3-Prong AC Cord, Instruction Manual  
   
SPECS: Charging Power: 40W  
  Current Range: 0-3.0A  
  Charge Port: JST-XH 2.5 port  
  AC Input: 100-240V  
  DC Input: 10-18V  
  Dimensions: 5.6 x 5.1 x 1.9" (142.2 x 130 x 48.25mm)  
  Weight: 10.8 oz (306g)  
   
0678 12 Port 1S Battery Charge Adapter, INSTOCK 14.99
  This is the Venom 12-Port, 1-Cell LiPo Battery Charge Adapter.  
   
FEATURES: Allows charging of up to six micro LiPo batteries at a time  
  Compatible with park flyer batteries that have Micro JST (MCPX)  
  or JST-PH/Pico connectors  
  Self-settable fuses with LED indicators  
   
INCLUDES: 12-Port Battery Charge Adapter with 4mm Banana Plugs and Instruction 
  Sheet  
0684 AC/DC Pro3 Peak Charger
INSTOCK 79.99

TECH NOTES

  This is the AC/DC Powered Venom Pro3 LiPo/NiMH Battery Charger.  
   
FEATURES: Charges 1-6S LiPo  
  1-15 cell NiMH/NiCd  
  1-10 cell Lead Acid (2-20V) batteries  
  On-board balance block  
  7.0 amp charging rate  
  Multiple discharge profiles  
  Memory profiles may be recalled for up to five commonly used  
  batteries  
  Thirty day limited warranty through Venom beginning at date of  
  purchase  
   
INCLUDES: Venom Pro3 LiPo/NiMH Battery Charger with AC Power Cord  
  XT60, Dean's, EC3, EC5, Tamiya, JST, Receiver Connector and Alligator
  Clips  
  Instruction Manual  
   
SPECS: Charge Current: 0.1 - 7.0A  
  Discharge Rate: 0.1 - 1.0A  
  Circuit Power: 80 Watts  
  Current Drain Balancing: 300mAh per Cell  
  Input: DC 11.0-18.0 Volts - AC 100v-240v  
  Display Type: LCD  
  Length: 6.1" (136mm)  
  Height: 2.2" (56mm)  
  Width: 5" (127mm)  
  Weight: 14oz (400g)  
0685 Pro Duo LiPo/LiHV/NiMH Battery Charger
INSTOCK 99.99 
0686 Pro Quad 100W X4 AC/DC 7A LiPo/LiHV/NiMH Bal Chrgr INSTOCK 229.99

TECH NOTES

  This is the Venom Pro Quad 100W X4 AC/DC Powered Battery Charger.  
   
FEATURES: Charges 1-6 cell LiPo, LiFe Li-Ion  
  1-15 cell NiMH NiCd  
  2-20V lead acid batteries  
  Two 2.3A USB charging ports on rear of charger  
  Four separate charging circuits with four dedicated power supplies  
  multiple chemistry charging  
  Five button control interface with backlit LCD screen for easy menu  
  navigation  
  Extra long balance leads for safe charging in a LiPo sack  
  One year limited warranty through Venom beginning at date of purchase
   
INCLUDES: Venom Pro Quad 100W X4 AC/DC Battery Charger  
  One each, Alligator, EC3, EC5, JST, Receiver, Tamiya, and HXT 4mm  
  Charge Leads  
  two Deans, and two XT60, Charge Leads  
  Balance Leads  
   
SPECS: Charge Current: Four 0.1 - 7.0A  
  Discharge Rate: 0.1 - 1.0A  
  Circuit Power: Four 100W  
  Current Drain for Balancing LiPo: 300mAh per cell, 1-15 cells  
  USB Output: Two 5V 2.3A USB 2.0  
  Input: DC 11.0V-18.0V - AC 100V-240V  
  Display Type: LCD  
  Length: 7" (178mm)  
  Height: 9.25" (235mm)  
  Width: 4.25" (108mm)  

TECH NOTES

  This is the Venom Pro Duo Dual Power Battery Charger.  
   
FEATURES: Charges 1-6S lithium  
  1-15 cell NiMH and NiCd cells  
  2-20V lead acid batteries  
  80W dual charging circuit  
  Easy menu navigation with five button control interface and brightly 
  backlit LCD screen  
  Lithium cell voltage monitoring  
  Two extra long balance leads for safe charging in a LiPo sack  
  Upright space saving design  
  Thirty day limited warranty through Venom beginning at date of  
  purchase  
   
INCLUDES: Venom Pro Duo Dual Power Battery Charger with AC Power Cord  
  XT60, Dean's, EC3, EC5, Tamiya, JST, Receiver Connector and Alligator
  Clips  
  X2 Balance Block  
  Instruction Manual  
   
SPECS: Input Power: AC, 100-240V  
  DC, 11-18V max.  
  Charge Current Range: 2 x 0.1 - 7.0A  
  Discharge Current Range: 0.1 - 1.0A  
  Circuit Power: 2 x 80W, 5W for discharging  
  Current Drain for LiPo Balancing: 300mAh per cell, 1-15 cells  
  Weight: 14.1oz (400g)  
  Dimensions: 5.3 x 5 x 2.2" (136 x 127 x 56mm)  
Venom Dual-Output 600w Power Supply INSTOCK 189.99 0673
This power supply comes with two output ports, each adjustable from .01 to 40 amps. Venom press release:

At Venom we know ample amounts of clean power is a critical component of a successful charging station, so after many requests from both our dealers and Factory Team Pilots we are proud to introduce the Venom PS600 Power Supply.

This dual output unit is built from rock solid stamped steel construction for years of reliable use. The Venom PS600 easily handles AC input voltages from 100v to 240v and features user adjustable output voltage setting from 0 to 20 volts and output current settings from .01 amps to 40 amps.

The PS600 has an easy to see backlit LED screen, is fan cooled, and offers both timed and temperature triggered auto shutoffs for added safety. This robust power supply is perfect for feeding most all power hungry chargers, popular with today’s most discerning RC customers.

Upgrade your charging station today with the Venom PS 600 Dual Output Power Supply.

Features:

Timer Shut-Off
Over-Power Protection
Over-Heating Protection
Temperature Control Fan
Specifications:

Length: 9.75in (248mm)
Width: 7.5in (190.5mm)
Height: 3.75in (95mm)
Input: AC 100v – 240v
Output: .01 – 40A
Operating Voltage: .01 – 20V
Circuit Power: 600W

0673 – $199.99

[Show slideshow]
ps_600_front_large
ps_600_front_lightson_blk_large
ps_600_front_vs2-_large
If you like this article, check out this additional article on Venom.
Venom Pro Power 1350W DC Power Supply
0692 249.99 INSTOCK
Venom Pro Power 1350W DC Power Supply

Built with the specific purpose of powering the Venom Pro Touch HD Multi-Chemistry Charger, the Pro Power 1350W Power Supply delivers clean, consistent power for todays most demanding chargers.

Built with a durable steel chassis that contains a total of four temperature controlled cooling fans, this power supply is capable of DC power output up to 1350W/60A and has a universal power input capable of handling both 110V and 220V (110V cable supplied). Power is transferred through dual gold-plated XT90 connectors and also features a convenient front panel USB port.

Power output is user adjustable (12V-24V) by turning the easy grip knob on the front of the power supply. Connection information is presented on the backlit LCD display as well as the LED power percentage indicator on the front of the device.

Rounding out this power supply are three safety features giving you protection from short circuit, over current and over temperature assuring your power needs are met with trouble free confidence.

Looking for a cutting edge charger to pair with this power supply? The Venom 1350W Pro Touch Charger was designed specifically to get the most from this power supply.
POWER SUPPLIES
44174 ePowerBox 30 Amp Power, 109.99 
  This is the 30A ePowerBox Switching Power Supply from Hitec.  
   
FEATURES: Dual port 30A 540W high output power supply with variable voltage  
  supports up to 9S LiPo battery chargers  
  Dual USB ports supply 5V DC at up to 1000mAh-ideal for MP3 players,  
  mobile phones and digital cameras  
  Binding post/bullet banana plug ports  
  Integrated LCD voltage and amp display  
  Built-in temperature, circuit, and overload protection  
  Variable speed cooling fan  
  One year limited warranty through Hitec beginning at date of purchase
   
INCLUDES: 30A ePowerBox Switching Power Supply with AC Power Supply Cord with  
  3-prong Plug (110V North America standard), Instruction Sheet  
   
SPECS: Input Voltage: 100-240V AC  
  Input AC Frequency: 50-60Hz  
  Output Voltage: 12-18V DC  
  Output Current: 30A @ 12V DC/540W max  
  Current Overload Protection: <31A 500MS  
  Operating Temperature: 0-40°C (32-104°F)  
  Dimensions: 8.58 x 5.47 x 2.34" (218 x 139 x 59.5mm)  
  Weight: 3.57lbs (1.62kg)  
  Input Fuse: 10A  
  LCD Display: Voltage Precision +-0.3V  
  Current Precision +-0.3A  
  Output Voltage Ripple: <150mV  
  Power Efficiency: 89%  
  Power Factor: >0.98  
  Over Temperature Protection: <65°C (149°F)  
  Operating Humidity: 0-90%  
   
44164 Ultima X2 Dual Port Charger INSTOCK 144.49 

TECH NOTES

  This is the DC Powered Ultima X2 High Output Charger  
  and Battery Management System from Hitec.  
   
FEATURES: Compatible with 1-6 cell LiPo, Li-Ion, LiFe, 1-18 cell NiMH, NiCd  
  and 1-12 cells Pb (lead) batteries  
  System functions as a charger, discharger, cycler for NiCd, NiMH  
  batteries as well as a charger and balancer for LiPo cells  
  Charging and discharging parameters can be stored for up to ten  
  different batteries  
  Mini USB port allows charger to be linked to a PC to view graphs of  
  charge and discharge curves with a capacity, voltage, temperature  
  and ampere display  
  Delta peak voltage detection  
  1 to 5 cyclic charging/discharging is operable for battery refreshing
  and balancing  
  USB port for 5V 1A continuous current for powering mobile phones,  
  digital cameras and I-Pods  
  Two year limited warranty beginning at date of purchase  
   
INCLUDES: Hitec Ultima X2 High Output Charger  
  Two Alligator Clamps  
  Tamiya Charging Connector  
  Multiplex Charging Connector  
  Receiver Battery Charging Connector  
  XH Adapter  
  HB/PQ Adapter  
  Instruction Manual  
44170 X2-400 2-Port Multicharger INSTOCK 144.99 
  This is the Hitec X2-400 Dual Port Charger, Discharger and Balancer.  
   
FEATURES: Charges 1-6S LiPo, LiFe LiIon, 1-15 cell NiCd, NiMH, and  
  1-10 cell Lead Acid (Pb) batteries, batteries do not have to be the
  same chemistry or configuration to be charged at the same time  
  Two independent 400 watt charging ports charge up to 20 amps and  
  discharge at 0-1.5 amps  
  Two high-contrast LCD displays  
  Fast, balance, and storage charge modes for lithium batteries  
  Five user customizable presets per channel  
  Temperature threshold (temperature probe required)  
  Aluminum case  
  One year limited warranty through Hitec beginning at date of  
  purchase  
   
INCLUDES: Hitec X2-400 Dual Port Multicharger with XH Balance Board, Thunder-  
  Power/FlightPower Balance Board, two Alligator Clips, 10AWG  
  Input Leads with 4mm Banana Plugs, Crocodile Clip Charging Cable,  
  two 18AWG Charging Cables with Pretinned Leads, Instruction Manual 
   
REQUIRES: 12-18V DC Power Supply with a minumum amperage rating of 60A  
   
SPECS: Input Voltage Range: 12-18V DC  
  Required Input Amperage: 60A  
  Charger Circuit Power: 400 watts x 2  
  Discharge Circuit Power: 25W  
  Charge Current Range: 0.1-20A per channel  
  Discharge Current Range: 0.1-5A per channel  
  LiPo. LiFe and LiIon Balancing Current Drain: 200mA per cell  
  LiPo. LiFe and LiIon Cell Count: 1-6 cells  
  Maximum NiCd, NiMH Cell Count: 1-15 cells  
  Lead Acid Cells/Voltage: 2-20 volts  
  Dimensions: 8.9 x 6.7 x 2.6" (226 x 170 x 66mm)  
  Weight: 3.4lbs (1542g)  
   
   
44173 Lipo Checker & Balancer, on order, 22.99

TECH NOTES

  This is the Hitec LiPo Battery Checker and Balancer.  
   
FEATURES: Check voltage of each cell and balances 2-6S LiPo batteries  
  One year limited warranty through Hitec beginning at date of purchase
  LCD cell voltage display  
  Digital battery capacity display  
  Auto shut off  
   
INCLUDES: Hitec LiPo Battery Checker and Balancer with FlightPower/Thunder  
  Power Adapter, Wrist Strap and Instructions  
   
SPECS: Voltage Display Tolerance: +/-1.5%  
  Voltage Display Resolution: 0.01v  
  Voltage Display Range: 0-5v  
  Balancing Current: 50mA  
  Case Size: 2.7 x 1.5 x 0.43" (70 x 38 x 11mm)  
  Weight: 0.81oz (23g)  
  Operating Temperature: 10-45°C  
  Storage Temperature: -20-+60°C  
   
44212 X4 Micro AC/DC 1 Cell LiPo Charger ON ORDER 46.99

TECH NOTES

  This is the Hitec X4 Micro AC/DC Powered 1 Cell LiPo Battery Charger.  

FEATURES: Ideal portable charger for micro flyers  
  Four independent charge ports with four different battery connectors 
  Molex, Reversed Molex, MX, and mCPX  
  Independent LED displays  
  Audible alarm indicates process termination  
  Adjustable charge current from 0.1-1 amp  
  Short circuit, over current, reverse polarity, and DC input voltage  
  protection  
  One year limited warranty beginning at date of purchase through  
  HITEC RCD USA, INC  

INCLUDES: Hitec X4 Micro AC/DC Powered LiPo Battery Charger with AC and DC  
  Power Cords and Instruction Manual  

SPECS: AC Input: 100-240 volts  
  DC Input: 11-15 volts  
  Charge Current Power: 4 x 4W  
  Charge Current Range: 0.1-1.0 amp  
  Net Weight: 10 oz (283g)  
  Dimensions: 5.2 x 3.9 x 2.0" (132 x 100 x 50mm)  
44152 Thunder Power Battery Adapter, INSTOCK, 7.99 
44153 Polyquest/HP Battery Adapter INSTOCK 7.99
44154 EH Battery Balance Adapter, INSTOCK 7.99
HITEC CHARGERS & POWER SUPPLIES, CLICK HERE
CHARGE SQUIDS IN STOCK 
Home
Product List
TRAXXAS
GP/PLANES
HPI RACING
BOATS
AXIAL
seagull /SIG
QUADS
CHARGERS
PARK ZONE
HOBBYZONE
EFLITE
SPECTRUM
HITEC ACC
FPV
ARMA
FUTABA
losi
VENOM BATT

AC to 12VDC, 1.5-Amp Power Supply, instock 19.99, eflc4000
12V 600mAh Battery Charger (HAN103), instock 10.99 
Ultra Micro-4, 4x9W, AC/DC Battery Charger (EFLC1105A), instock 54.99
CHARGES

2S, 120–300mAh Li-Po packs with the JST-PH plug
1S, 200mAh ultra micro MCPX Li-Po
1S, 500mAh ultra micro Li-Po (adapter required)
1S, 30–150mAh ultra micro Li-Po
INCLUDES

UMX-4 charge unit
AC power cord
DC power cord
1S UM battery extension lead
1S MCPX battery extension lead
Prophet Sport Plus 50W AC/DC Charger (DYNC2010CA), 49.99 instock
Key Features
50W charge power output for Ni-MH (1–8C) or Li-Po (2–6S)
High-visibility, simplified user interface
Select charge current from 0.1A to 5.0A with a single push button
Twelve red LEDs indicate charging current
Three red LEDs indicate Ni-MH, Li-Po or Li-Po Fast charging
Three LEDs (red, yellow and green) indicate charging status
Start/Stop a charge cycle with a single button
Audible beep alerts
Removable AC and DC power cords
Short-circuit, over-current, reverse polarity, low input voltage and over-temperature protection
Meets IP33CW, IK07 environmental specs
Rugged industrial plastic case
1642 LiPo Safety Charge Sack Large, 19.99 instock
UPTUP200DUO 

UP200 DUO 200W Dual Port Multi-Chemistry AC/DC Charger 
The UP200DUO is perfect for the pilot or driver that needs to charge two batteries simultaneously. Producing 200 watts of power with DC input and 100 watts on AC, this compact charger works well on the bench, at the track, or at the flying field. Features include: selectable charge termination voltage, adjustable delta-peak (NiCd/NiMH), individual cell balancing, battery meter function, data storage (10 profiles in memory), and a USB port for firmware upgrades or charging phones or tablets. Includes T-plug charge leads (2) and XH balance boards (2) and covered by Ultra Power's unconditional 1-year exchange guarantee.

Specifications:
Input Voltage: AC 100-240V, DC 11-18V
Charge Power: DC input 2x100W, AC input CH1+CH2=100W
Discharge Power: max 2x10W
Charge Current: 0.1-10A
Discharge Current: 0.1-5A
LiPo/Li-ion/LiFe/LiHV cells: 1-6
NiCd/NiMH cells: 1-15
Pb cells: 1-10
UPTUP200DUO . instock, 99.99
RCE2471 
PRIME CHARGER TEMP SENSOR, 2.99 instock
0699 Pro LiPo Checker Multi Tool, 16.99 
Buy this
0644 Low Voltage Battery Monitor 2-8S, INSTOCK, 10.99

TECH NOTES

  This is the 2-8S LiPo LiIon and LiFe Voltage Monitor from Venom.  

FEATURES: Checks individual cell voltage and overall pack voltage and sounds an
  alarm if the voltage is below 3.3V per cell  
  Attaches to the balance connector on most 2-8S (7.4-29.6V) LiPo packs
  Guaranteed to be free from material defects and manufacturing faults 
  when new  

INCLUDES: 2-8S LiPo LiIon and LiFe Voltage Monitor  

SPECS: Voltage Precision: +0.01V  
  Cell Voltage Range: 0.5-4.5V  
  Pack Voltage Range: 0.5-36V  
  Test Mode Voltage Range: 3.7-30V  
  Low Voltage Alarm Mode: 2-8S  
  Alarm Voltage Range: OFF-2.7-3.8V  
BACK TO TOP OF PAGE